Manual SEG MS 911 (page 21 of 60) (English, German, French, Italian)

491096

Zoom out

Zoom in

1/60

2. PROGRAM PLAY

Press the PLAY/PAUSE button on the unit (or remote control). The unit will play the first track

of the program. When all tracks have been played, the unit display will be shows the number of

tracks and the playing time of the CD/MP3 songs.

3. CANCEL PROGRAM

Press the STOP button once, or open the CD tray door and close it again that the memory will be

erased. Set a new program, the and the existing one will be cleared

UK-8

AU X PLAY(Aux in cable not included)

Slide the FUNCTION switch until the "AUX” indicator light on the display. This unit can input

analog audio through these jacks. Use a cable with RCA phone plays to connect audio equipment.

Note : During in the program mode.

1. Press the "PLAY MODE" button once, the " " indicator will light on the display

. Then the unit will

repeat the current track.

2. Press the "PLAY MODE" button twice, the " " will l light on the display. Then the unit will

repeat all the total number of tracks.

3. Press the "PLA

Y MODE" button once more again. The unit will return to play the program in

normally.

ALARM CLOCK OPERATION

During the unit in STANDBY mode :

To set the correct "ALARM 1 or 2" :

1. Press the “ALARM 1 or 2 SET/OFF " button once on the remote control. The "AL 1 or 2 BELL

SYMBOL" indicator will light on. Press the "ALARM 1 or 2 SET/OFF" button one more time and

hold it for a few seconds, then the "HOUR" indicator will flash. Adjust to the correct "HOUR" by

pressing the "SKIP/SEARCH" (UP or DOWN) button.

2. Press the “ALARM 1 OR 2 SET/OFF" button again. The "MINUTE" indicator will flash. Adjust to the

correct "MINUTE" by pressing the "SKIP/SEARCH" (UP or DOWN) button.

3. Select your preferred alarm code by sliding the Function switch on the main unit.

4. Press the “ALARM 1 OR 2 SET/OFF” button repeatedly to confirm the "ALARM 1 OR 2" function;

the "HOUR/MINUTE" indicator will flash and switch to "CLOCK",and then the "AL 1 OR 2 BELL

SYMBOL" indicator will light on the LCD display

Note: 1. There is no alarm setting in AUX Mode.

2. The buzzer will alarm under the CD mode if no CD in the compartment. The same under the

USB mode and SD card mode, if no USB and SD card.

3. Yo

u should enter into the USB mode and SD card mode before setting alarm under USB

mode and SD card mode.

SNOOZE FUNCTION

1. Press the SNOOZE button after the TUNER, CD, USB, SD CARD or BUZZER alarm sounded. The

alarm will go off and will come on again in approximately 9 minutes.

2. Press and hold the “SNOOZE” button around 2 seconds, the SNOOZE will flash on the display,

then press the SKIP/SEARCH (UP or down) button to set the SNOOZE time.(the second alarming

time after the set time from 1 minute to 20 minutes.)

3. The alarm will keep alarming 60 minutes, if no button pressed; however

, all set SNOOZE time will

go of

f automatically after 60 minutes.

NOTE :1. When the bell is ringing, you can press the "STANDBY" button once or press the “ALARM 1

SET/OFF or ALARM 2 SET/OFF" button once on the remote control to stop the "ALARM 1 or

2" function. The “AL 1 or 2 BELL SYMBOL" indicator will still light on the LCD display

(It may keep the "ALARM 1 or 2" function in next day)

2. When the bell is not ringing, if you want to stop the "ALARM 1 or 2" function fully

, you can

press the “ALARM 1 SET/OFF or ALARM 2 SET/OFF” button once on the remote control

only

. The “AL 1 or 2 BELL SYMBOL” indicator will turn off on the display. The function of the

“ALARM 1 or 2" will cancel at once.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SEG MS 911 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SEG MS 911 Manual

Product: