491202
56
Zoom out
Zoom in
Previous page
1/113
Next page
TROUBLE SHOOTING GUIDE
To assist in locating possible faults use the help guide below.
No Picture, no sound Check that the TV is correctly plugged in. Check that the TV is connected to a suit-
No Picture
able power source. Check the electrical supply is turned on.
ted securely. Ensure
Ensure that the TV is powered on. Check that the cables are fit
the aerial and/or external sources are connected. Press the SOURCE button to
change the source. Turn the TV on or off.
and see if the same problem occurs. Press V+ button to see if the problem can be
solved.
No picture on some channels Check that correct channel is selected. Adjust the antenna.
No colour on some channels
(black &white)
Check if the same problem exists on other channels. Ensure the correct picture
settings are selected.
Noisy, Snowy, Ghosting picture. Check the antenna is connected correctly. Check that the antenna Is in good condi-
tion. Try moving the antenna.
If none of the suggestions seem to work, try switching your TV off and then on again. If this does not work contact our
technical helpline.
NOTE: The TV must only be repair
registered service person. Never attempt to remove the back cover
as the TV has dangerous voltages inside that may cause fat
re.
TECHNICAL SPECIFICATIONS
cations of the TV that you have just purchased may vary from the information in this table due to technical in-
novations.
cations
TV System PAL/BG/DK/ I
Audio System BG/DK/I
Screen size 23.6” (Diagonal)
Resolution 1920 x 1080 Pixels (RGB)
Aerial input 75 Ohm (unbalanced)
Audio output power 2 x 3W
Power requirements 12V 3,33A
Power consumption 37W
Standby power consumption <0.5W
.4
24
Will not accept disc DVD not selected. Select DVD mode with SOURCE button.
Screen shows "NO DISC"
Disc placed incorrectly. Disc must have mirror side facing you if single side.
Disc damaged or dirty. Inspect disc. If damaged you must discard. If dirty see
"Disc care" page.
Picture "Freezes" or
breaks up
Disc damaged or dirty, See "Disc care" page
Certain disc functions
not working.
Disc may not support required feature. Read disc information.
This unit is a class 1 laser product. However this
unit uses a visible laser beam which could cause
operate the player correctly as instructed.
4.9Kg
Weight
No Sound
Press the MUTE button and check if Mute mode is set. Switch to another channel
SYMPTOM
SOLUTION
LED 2400 60 cm (23,6”) LED BLU-TV
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG LED2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG LED2400 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 13,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info