788845
17
Zoom out
Zoom in
Previous page
1/20
Next page
14
4. For more volume, place the roots of your
hair over the brush as illustrated .
5. As soon as the hair is dry, either switch off the appliance or switch
it to the function mode to finish styling.
Straightening your hair — infra-red heat function without air flow
WARNING – risk of burns
The hair must never be wet when being straightened without air flow!
Only use this function mode on dry hair.
1. Before straightening your hair, dry it first with the function mode
or until it is fully dry.
2. Then select function mode .
3. Divide your hair into sections approx. 6 to 7 cm wide.
4. Hold the section to be straightened at
the tips and pull it taut. Guide the brush
slowly and evenly over your hair from
the roots towards the tips as illustrated.
Do not hold the brush for longer than
2 seconds on the same spot. Be careful
not to touch your scalp, ears, fingers or
face with the hot bristles. The bristles
must be directed away from your head!
7
Ensure that the wall socket is easily accessible,
so that the mains plug can be disconnected quickly,
if necessary. Route the mains cable ensuring that it
does not present a tripping hazard.
Do not leave the appliance unattended while it is
connected to the mains power supply.
Remove the mains plug from the wall socket when
you are not using the appliance, if malfunctions occur
during use, during thunderstorms and before cleaning
the appliance. Always pull on the plug, never on the
mains cable.
As the mains cable is subjected to a great deal of
movement while in use, you should check it regularly
for damage and wear. Do not wind the mains cable
around the appliance.
The mains cable must not be kinked or squeezed.
Keep the mains cable away from hot surfaces and
sharp edges.
Do not use the appliance if the appliance or the mains
cable show any signs of damage or if the appliance
has been dropped.
117102 en Heissluftbuerste_100x150_v2.indd Druckbogen 7 von 10 - Seiten (14, 7)117102 en Heissluftbuerste_100x150_v2.indd Druckbogen 7 von 10 - Seiten (14, 7) 26.08.21 11:0726.08.21 11:07
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG HB 926 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG HB 926 in the language / languages: English, German as an attachment in your email.

The manual is 0.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info