491086
26
Zoom out
Zoom in
Previous page
1/36
Next page
GENERAL OPERATION
1POWER[On/Off]
Plug in the supply socket,and press the MAIN POWER SWITCH key on the TV. You may press any
of the STANDBY, Program Number (0-9) and CH-/+ keys on the remote control to turn on the TV.
To switch back to the Standby mode, press STANDBY key. You can also power off the TV directly by
pressing the MAIN POWER SWITCH key.Part of circuit on the TV remains active in the STANDBY mode.
To cut off the power off completely, please press the MAIN POWER SWITCH.
Auto off without signal received
When there is no signal received (for example,the program of a certain channel is over),the TV will switch
to the Standby mode if no key is pressed within 5 minutes. If you have set"Off Time"and the remaining
time is less than 5 minutes, Off Time will be carried out prior to AUTO OFF. At the last 5 minutes, it will
hint per-min; and at the last 1 minute, it will hint per-sec on the screen.
2Num Keys
a. To select channels
b. Press any number button to reset TV when it is standby,and the TV will turn to the right channel
as the number.
c. Press the number button to change AV mode to TV mode.
d. Input the page of sub code in txt mode.
e. Input the channel frequency in tune menu.
f. Input the password of the Hotel mode.
3[CH+/-]&[VOL+/-]
Press CH[+/-] to switch channels; Press the VOL-or VOL+ button to decrease or increase the volume.
Adjustable range: 0-63
During normal play, press the MUTE button and the sound is eliminated. The TV will display a picture
on the screen. To cancel MUTE, you may press the MUTE button again or the VOL+ button.
4TV/AV Selection
In the TV mode,press the TV/AV button to enter the AV mode. In the AV mode,the TV receives AV signals
from external equipment.To resume broadcast viewing, press the TV/AV button,CH-/CH+ buttons or Num
keys.To receive signals from external equipment, please select the relevant AV mode. In the hotel mode,
if “AV lock” is ON, there will be “locked” displayed on the screen when switch to AV mode.
5Channel Selection[-/--/---]
Pressing the CH-/CH+ buttons can select another lower-numbered or upper-numbered channel.
Direct selection
To select a one-digit channel number
Press the DIGIT button to choose "-" firstly, then press one of 0-9 buttons.
To select a two-digit channel number
Press the DIGIT button to choose "--" firstly, then enter a first-digit and second-digit. If only one digit is
entered, the channel will automatically shift to the digit related channel in three seconds.
To select a three-digit channel number
Press the DIGIT button to choose "---" firstly, then enter a first-digit,second-digit and third-digit. If only one
or two digits are entered, the channel will automatically shift to the digit (digits) related channel in three s-
econds.
Note: If you enter a number over 235, the channel will remain the current one.
6MUTE
Press the MUTE button to switch MUTE ON/OFF modes. The “MUTE ON” mode will display
on the
screen. When there is no signal received in TV mode,the TV will be in MUTE ON mode.and there will be
no sound output.
7PICTURE MODE
There are 4 picture modes to select. Press this button to switch userÎ soft Înature Îrich.
4
General Operation
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG CTV 1408 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG CTV 1408 in the language / languages: English, German as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info