491142

SEG CR 114ROUND Manual

19
Zoom out
Zoom in
Previous page
1/29
Next page
TO USE THE MEMORY SET (RADIO PRESET) FUNCTION
This clock radio features a total of 5 preset memory of FM radio .These allow you to preset your
favorite stations and access them quickly.
1. Turn on the radio by press of RADIO / SLEEP. Press or to select a radio station you
like to preset memory.
2. Then press and hold the MEMORY until “MEM” appears and “01” flashes below the time digits.
3. Then press MEMORY again to store Memory 01.
4. Press or to select another station you like to preset. Then press and hold MEMORY
until “MEMORY” appears and “01” flashes below the time digits. Press + or – button to select
“02” on the lower display, and then press MEMORY again to store.
5. Repeat Step 4 to preset up to five FM stations.
6. To listen to a preset station at any time, simply press the MEMORY to select a preset station
while the radio is on.
7. To edit a preset station, select another station and then repeat Step 2-4. This overrides the
original setting.
TO USE THE SLEEP TIMER
1. Press the RADIO/SLEEP button twice to enter the sleep mode. The clock display shows the
SLEEP icon and “5” (5 minutes) and flashes keep pressing the RADIO/SLEEP to select a 10-,
15-, 30-, 45-, 60-, 75-, 90-minute sleep timer. The sleep timer display remains for few seconds
and then returns to normal clock display. The SLEEP icon will appear, showing the radio timer is
activated.
2. The radio will play for the programmed sleep time and then shut off. To check how many sleep
time is remaining, press RADIO/SLEEP button once.
3. To turn off the radio before the sleep time has elapsed, press SNOOZE/LIGHT once.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which maybe caused by electro-
static discharge or other interference, use a thin object to press the RESET button on top. The clock
radio will be reset to default settings and you need to set it again.
CARE OF YOUR PRODUCT
1. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive
heat or moisture.
2. Protect your furniture when placing your units on a natural wood and lacquered finish by using a
cloth or protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such
as Benzine, thinner or similar materials can damage the surface of the unit. Make sure the unit
is unplugged before cleaning.
4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadimium) batteries.
5. If the unit is not to be used for a prolonged period, such as a month or longer, remove the
batteries to prevent possible corrosion. Should the battery compartment become corroded or
dirty, clean the compartment thoroughly and replace the batteries.
18
Aux Line-in
When connecting to external audio source through AUX Line-in,please use supplied connection cable.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG CR 114ROUND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG CR 114ROUND in the language / languages: English, German as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info