491162
55
Zoom out
Zoom in
Previous page
1/62
Next page
50 51
REMOVE THE TV STAND
How to remove the TV stand
If you prefer to mount your new TV on a wall instead of attaching it to the TV stand, please remove the
TV stand from the TV unit before mounting the TV on the wall.
Read all instructions before continuing with the TV stand removal.
a. Open the box, and make sure all necessary parts are in the box. The TV is assembled with the TV
stand.
b.Cover an even stable surface with a soft cloth. Place the LCD TV unit face-down on the cloth. Fit the
base onto the bottom of the LCD TV unit as shown at
PROBLEM POSSIBLE SOLUTION
No sound and picture
- Check that the main plug has been connected to a wall outlet.
- Check that you have pressed the ON/OFF button on the remote control.
- Check the picture contrast and brightness settings.
Normal picture but no sound
- Check the volume.
- Sound muted? Press the MUTE button.
- Try another channel the problem may be with the broadcast.
- Are the audio cables installed properly.
The remote control does not
work
- Check to see if there are any objects between the product and remote control
Causing obstruction.
- Are batteries installed with correct polarity (+ to +,- to -).
- Whether the remote control is out of its working distance or angle.
- Install new batteries
Power is suddenly turned off
- Is the sleep timer set.
- Check the power control settings. Power interrupted.
- No broadcasting on station. Check whether Off is selected in TIME menu under option Auto
Standby.
Picture appears slowly after
switching on
- This is normal, the image is muted during the product startup process.
Please contact your service center, if the picture has not appeared after
No or poor color or poor picture
- Adjust the color in menu option.
- Try another channel, the problem may be with the broadcast.
- Are the VIDEO cables installed properly?
Horizontal/vertical bars
or picture shaking
- Check for local interference such as an electrical appliance or power
tool.
Poor reception on some
channels
- Station or cable product experiencing problems. Tune to another
station.
- Station signal is weak, reorient antenna to receive weaker station.
- Check for sources of possible interference.
Lines or streaks in pictures
- Check the antenna (Change the direction of the antenna).
No output from one of the
speakers
- Adjust balance in menu option.
PROBLEM POSSIBLE SOLUTION
The signal is out of range
- Adjust resolution, horizontal frequency, or vertical frequency on input source.
- Check it whether the signal cable is connected or loose.
- Check the input source.
Vertical bar or stripe on
back ground & Horizontal Noise
& lncorrect position.
position.
Screen color is unstable or
single color.
- Check the signal cable.
- Reinstall the PC video card.
TROUBLE SHOOTING
Before contacting the service technician, perform the following simple checks. If any problem still
exists, unplug the TV and call the service hotline
NOTE: There is a problem in VGA mode. (Only VGA mode applied)
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG Bergamo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG Bergamo in the language / languages: English, German as an attachment in your email.

The manual is 9,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info