599044

SecurityMan IPcam-SD Manual

14
Zoom out
Zoom in
Previous page
1/151
Next page
10
5. In “Add/Remove IPCam” window, click to highlight “Demonstration” then
click “ADD DEVICE” to open “Edit” device window as shown below.
6. In “Edit” device window, put a check mark on “IP Address” then click on
the “IP Search” button to start searching for IP address of IP camera. After
clicking on the “IP Search” button, it will detect and list two IP addresses:
192.168.1.10 (Ethernet) and 192.168.1.11 (Wifi), and they are the default
IP addresses of the IPcam-SD. Put a check mark on the first IP address
(Ethernet), and then click on “EditDevice” button as illustrated below.
7. In “EditDevice” window, please modify the default IP Address (Ethernet),
Subnet Mask, and Gateway to match your local area network settings.
IMPORTANT NOTE: To find your local area network settings on your
computer click “Start” “All Programs” ”Accessories” ”Command Prompt”.
At the DOS “Command Prompt” screen, type “ipconfig”, and then press
“Enter” as illustrated below. Please write down your local “IPv4 Address”
or the IP address, the “Subnet Mask”, and the “Default Gateway”. Exit from
the “Command Prompt” window by typing “exit”.
8. Go back to the “EditDevice” window to change the “Subnet Mask” and
“Default Gateway” to what you wrote down on Step 7. The final step is to
assign an IP address to the IPcam-SD. There are 4 sets of numbers in an IP
address. The first three sets have to be the same as “Default Gateway” and
then assign the 4th set of numbers between 100~200 (for example 189) as
illustrated below. Then click “Modify” to confirm the changes. If everything is
setup correctly, you will get “Save Config to device successful” window, click
“OK” to advance to the “ADD DEVICE” window. In this Quick Start Guide, we
use 192.168.248.189 for demonstration purpose only.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SecurityMan IPcam-SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SecurityMan IPcam-SD in the language / languages: English as an attachment in your email.

The manual is 10,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info