671293
8
Zoom out
Zoom in
Previous page
1/12
Next page
9
15
14
16
Für die professionelle und optimale Reini-
gung Ihrer Teppichböden empfehlen wir die
Elektroteppichbürste (15). Durch ein Dreh-
Kipp-Gelenk* (14) ist die Elektroteppichbür-
ste in alle Richtungen beweglich und umsteu-
ert spielerisch jedes Hindernis. Die Elektro-
teppichbürste ist in der Stärke der Bürsten-
wirkung variabel und sorgt für eine optimale
Reinigung bis zum Rand.
Das Rastpedal (16) arretiert das Gerät in
senkrechter Ruhestellung und schaltet die
Bürste ab.
Zum Arbeiten Rastpedal (16) betätigen und
Gerät nach hinten kippen. Die Bürste läuft
jetzt an. Ein Arbeiten ohne Betätigen des
Rastpedals führt auf Dauer zur Beschädigung
des Gerätes. Die Bürstenkontrolle überwacht
ständig die Funktion der Bürste.
Grün- und Rot:
Die Bürstwirkung ist nicht
ausreichend. Durch Drehen des Stellknopfes
(22) auf eine niedrigere Position, wird die Bür-
ste abgesenkt. Leuchten das grüne und rote
Signal auch auf Stufe 1, so ist die rste ab-
genutzt und muß ausgetauscht werden. Diese
Angaben gelten nur für Teppichboden.
Grün: (
20) Bürste arbeitet gut. Wir empfeh-
len für den Gebrauch eine Bürsteneinstellung
zu wählen, die nur eine Stufe unterhalb der
grün-roten Anzeige liegt.
Für maximale Reinigungsleistung kann die
Bürste auf die niedrigste Position eingestellt
werden.
Rot:
(21) Die rste wurde blockiert oder
überlastet (siehe Abschnitt 12. Verstopfungen
beseitigen). Gerät ausschalten, Netzstecker
ziehen, Bürste auf Verunreinigung prüfen.
* je nach Ausstattung.
7. Entnahme der Rundbürste*
Bei allen Wartungs- und Reinigungs-
arbeiten: Gerät ausschalten und Netz-
stecker ziehen.
Um die Rundbürste der Elektroteppichbür-
ste* zu entnehmen, die Press-Taste (23)
drücken und gleichzeitig das Loslager (24)
nach unten wegdrehen. Die Bürste (25) etwas
im Uhrzeigersinn drehen und herausziehen.
Es empfiehlt sich, regelmäßig die auf der
Rundbürste aufgewickelten Fäden und Haare
zu entfernen.
* je nach Ausstattung
The use of a power head is recommended for
the optimal cleaning of carpets. The rotat-
ing design of the swivel neck* (14) allows the
power head to move in any direction, mak-
ing it easily maneuverable around obstacles.
The power head also has an adjustable brush
height and to-the-edge brush action for effec-
tive all round cleaning.
.
By pushing the foot pedal (16) and lowering
the handle, you activate the power head and
the brush begins spinning.
Failure to use the foot pedal will cause lasting
damage to the machine. The electronic brush
control constantly monitors the status of the
brush, communicating the status through the
lights on top.
Green and red
The brush is not fully engaged
in the carpet. The height adjustment should be
lowered. If the height adjustment is at its low-
est setting, the brush is worn and needs to be
replaced.
Green light only
Brush is working well. We
strongly recommend selecting a brush height
that is only one level beneath that at which
both the green and red lights are on.
For maximum cleaning performance, the
brush height adjustment can be lowered to its
lowest setting.
Red light only
The brush is blocked. (see be-
low 12. Removing Blockages) Turn off the ma-
chine, unplug it, and then remove the block-
age.
* depending on model.
7. Removing the Brush Roller *
Always unplug the vacuum from the
mains outlet before dismantling any
part of the machine.
The remove the brush roller, press the but-
ton marked „PRESS“ (23) and turn the bear-
ing (24) downward. Turn the brush (25) slightly
to the right and pull it out. We recommend
to regularly remove threads and hair, which
have been wound around the brush roller.
* depending on model
.
16
21
20
22
24
23
25
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sebo Dart 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sebo Dart 1 in the language / languages: English, German as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info