671278
10
Zoom out
Zoom in
Previous page
1/15
Next page
NOTE! D4 users with ET-1 or ET-2 power heads, please refer to your power head user’s manual for more detailed
instructions for operating and maintaining your power head.
Parquet Brush (standard) - Figure 16
The D4 comes with a parquet brush (29) that was designed specifically for vacuuming hard floors. It
is lightweight with soft bristles, so it glides gently over floors and provides easy maneuverability.
Fibers and hair can be pulled out of the bristles manually, or vacuum the bristles with the telescop-
ic tube.
Premium Parquet Nozzle (optional) - Figure 17
The Premium Parquet nozzle (35) is especially designed for use on hard surfaces. The brush should
be cleaned regularly. Remove the parquet nozzle from the telescopic tube to clean. Fibers and hair
can be pulled out of the bristles manually, or vacuum the bristles with the telescopic tube. The brush
strips are removable for cleaning and replacement.
Kombi Nozzle (optional) - Figure 18
The Kombi nozzle (10) is adjustable for carpet or hard floors. To set for carpet, slide the up arrow
button (36) to the right until it clicks into place. The hard floor dusting brush will raise up allowing
the head to move over the carpet. To set for hard floors, slide the down arrow button (37) to the left
until it clicks into place. The brush will lower to gently sweep your floors. The slider in Figure 20 is
set in the position for hard floors. Remove the Kombi nozzle from the telescopic tube to clean.
Fibers and hair can be pulled out of the bristles manually, or vacuum the bristles with the telescop-
ic tube. The brush strip is removable for cleaning and replacement.
Turbo Nozzle (optional) - Figure 19
The Turbo nozzle (38) has an air-driven rotating brush for gentle brushing of carpets. The Turbo noz-
zle can be adjusted for high and low pile carpet. To adjust the head for high pile carpet, push the slid-
er button (39) to the right. For low pile carpet, push the slider button (39) to the left. The slider in
Figure 21 is set in the low pile position. Remove the Turbo nozzle from the telescopic tube to clean.
Remove fibers and hair from the brush manually.
Retracting the Cord - Figure 12
To retract the cord, switch the vacuum off, unplug it from the outlet, then press the cord rewind
button (#7) and the mechanism will automatically rewind the cord. You must hold the button down
until the cord is fully rewound. Hold plug while rewinding into the cord wheel. Do not allow the
p
lug to whip while rewinding. The rewind mechanism will stop automatically when you release the
button. Before rewinding the cable, always switch off and unplug the vacuum.
Storing the Vacuum - Figures 13, 14 & 15
The vacuum can be stored with the canister in a horizontal or
v
ertical position. The standard Parquet brush has a parking tab
located on the back of the neck. The optional Premium Parquet,
Kombi and Turbo nozzles have a parking tab located on the front
of the neck (34). Insert the parking tab into the upper side of the
parking groove and slide down firmly. For vertical storage, use
the parking slot on the underside (26). For horizontal storage,
use the parking slot on the end of the canister (20).
Always unplug vacuum from outlet before dismantling any part of machine!
To remove a brush or power head, switch off the power and unplug the vacuum. Then, press the tool release
button (9) and pull the tube out.
!
USE AND MAINTENANCE OF BRUSHES & HEADS
20
Figure 14
26
Figure 13
34
Figure 15
10
Figure 17
Figure 16
29
Figure 19
L
L
39
35
38
36
10
37
Figure 18
L
L
Figure 12
7
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sebo D2 TOTAL ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sebo D2 TOTAL ECO in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info