671256
7
Zoom out
Zoom in
Previous page
1/12
Next page
1
10
2
3
6
11
19
7
8
5
4
18
1
11
12
15
16
17
13
14
3
9
19
8
9
20
21
17
4
16
26
22
6
3
15
12
3. Gerätebeschreibung
1 Griff
2 Schalter
3 Stiel
4 Sicherungsring
5 Deckelschloss
6 Filtergehäuse
7 Filterdeckel
8 Entriegelungstaste
9 Kehrsaugkopf
10 Anschlussleitung
11 Griff des Handsaugrohrs
12 Teleskopschlauch
13 Griffmulde / Tragegriff
14 Leitungshaken
15 Handsaugrohr
16 Fugendüse
17 Polsterdüse
18 Rastpedal
19 Exzenterhebel
4. Inbetriebnahme
Den Kehrsaugkopf (9) auf den Boden
stellen. Das Filtergehäuse (6) vor-
sichtig auf das aufrechte Gelenk (20)
und den Stützhebel (21) setzen und
nach unten drücken, bis die Entriege-
lungstaste (8) einrastet. Zur Stielbe-
festigung den Exzenterhebel (19) am
Filtergehäuse (6) nach vorne drehen.
Den Stiel (3) des Handgriffs bis zum
Anschlag in die Aufnahme am Filter-
gehäuse einschieben und mit dem He-
bel (19) verriegeln. Nun das Saugrohr
(15) zuerst in das Gelenk (20) einführen
und den Griff (11) des Handsaugrohrs
auf den Nocken (22) am Filtergehäuse
stecken. Die passende Schlauchsei-
te in das Saugrohr (15) stecken. Zum
Anschließen des Schlauches (12) an
das Filtergehäuse, das Ende mit der
schwarzen Buchse in die Verbindungs-
hülse (26) einführen und ganz ein-
schieben. Durch Zusammendrücken
der Griffflächen am Sicherungsring (4)
kann der Schlauch wieder gelöst wer-
den.
Wenn das Gerät nicht läuft, bitte
überprüfen, ob die Teile richtig
zusammengesteckt sind.
Hinweise zum Gebrauch
Die Bürste im Kehrsaugkopf (9) wird
nur angehoben, wenn das Gerät in der
aufrechten Position eingerastet ist. Im
abgekippten Zustand sollte das Gerät
ständig in Bewegung sein. Rotiert die
Bürste längere Zeit auf einer Stelle,
kann die Oberfläche des Bodenbelags
beschädigt werden.
3. Machine Description
1 Handle grip
2 On / Off switch
3 Handle assembly
4 Retaining ring
5 Cover release flap
6 Dust bag housing
7 Front cover
8 Housing release button
9 Base with brush
10 Cable
11 Attachment tube handle
12 Telescopic hose
13 Handle catch / Carrying
handle
14 Cable hook
15 Attachment tube
16 Crevice Nozzle
17 Upholstery Nozzle
18 Foot pedal
19 Handle catch
4. Assembly
To assemble the machine, put the
swivel neck (20) and support lever (21)
in the upright position. Carefully place
the dust bag housing over them and
push down until the release button
resets (8). To lock the handle turn the
handle catch (19) at the handle joint of
the filter bag housing (6) forward, then
slide the handle assembly (3) in as far
as possible and lock it with the handle
catch.
Push the black end of the hose into the
connecting tube (26) so that it clicks
into place. Insert the attachment tube
(15) into the swivel neck (20) and push
the handle (11) over the projection (22).
The hose can be taken off by squeezing
the retaining ring (4).
If the machine does not work,
then the steps above have not
been executed correctly. Please
ensure the parts are properly
pushed together.
Direction for use
The brush will only get lifted if the ma-
chine is locked in an upright position.
In a titled position you should perma-
nently move the machine. If the brush
rotates on one spot for a longer time, it
may cause damage to the floor. There-
fore the hose should never be used in a
titled position.
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sebo Automatic X-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sebo Automatic X-series in the language / languages: English, German as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sebo Automatic X-series

Sebo Automatic X-series User Manual - English - 12 pages

Sebo Automatic X-series User Manual - Dutch, French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info