817313
143
Zoom out
Zoom in
Previous page
1/232
Next page
Drive system and driving
display. Additionally, a warning acoustic sig-
nal may sound.
The purpose of the warning is to remember to
switch off the ignition before leaving the vehi-
cle.
WARNING
If the vehicle keys are used negligently or
without proper attention, accidents and se-
rious injuries can occur.
Never leave any key inside the vehicle
when exiting. The key can connect the drive
system and certain electrical equipment
can be operated, such as electric windows,
which can cause serious injuries.
When locking the vehicle, never leave
any child or anyone who may need help in-
side. They could be trapped in the car in an
emergency and will not be able to get
themselves to safety. Thus, for example,
depending on the season, a closed vehicle
can reach very high or very low tempera-
tures that can cause serious injuries and ill-
nesses or even death, especially in the
case of young children.
Never remove the key from the ignition
lock when the vehicle is moving. The steer-
ing column lock could suddenly become
locked and it would be impossible to steer
the vehicle.
The bit of the vehicle key must be com-
pletely unfolded and locked.
Do not fix objects that exceed 100 g in to-
tal to the vehicle key.
Note
If the vehicle key remains for a long time
in position 2 of the ignition lock with the
electric drive system disconnected, the 12-
volt battery will discharge.
The key can only be removed from the ig-
nition lock if the selector lever is in position
P. If necessary, press the lock key on the
selector lever and release it again.
The key can only be removed from the ig-
nition lock if the selector lever is in position
P. If necessary, press the lock key on the
selector lever and release it again.
Connecting the drive system
When the electric drive system is connected,
the electric engine is connected and the ve-
hicle is ready to move.
Requirements for connecting the drive
system
The drive system can be connected when the
following conditions are met:
The level of charge of the high-voltage bat-
tery is sufficient.
There is no charging cable plugged in.
The temperature of the high-voltage bat-
tery is within the operating range.
Connecting the drive system
Connect the ignition page 140.
Press the brake pedal and keep it pressed.
If the brake pedal is not pressed, the control
lamp comes on in green and the instru-
ment panel displays the message The brake
pedal is not pressed.
Set the selector lever to the N position or
engage the parking lock.
Keep turning the key in the ignition lock
without stepping on the accelerator. Keep the
key in this position until the control lamp 
comes on. When the control lamp  come
on in the instrument panel display, release
the key. The needle of the power indicator
goes from  to .
If the control lamp  does not turn on,
interrupt the process and repeat it.
When you start to move, release the hand-
brake.
Noises before starting to move
When you connect the drive system you may
hear a “click”. This is quite normal, and no
cause for concern. »
141
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seat Mii electric 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seat Mii electric 2020 in the language / languages: English as an attachment in your email.

The manual is 12.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seat Mii electric 2020

Seat Mii electric 2020 User Manual - German - 244 pages

Seat Mii electric 2020 Additional guide - Dutch - 1 pages

Seat Mii electric 2020 User Manual - Dutch - 244 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info