817317
46
Zoom out
Zoom in
Previous page
1/360
Next page
Emergencies
Raise the vehicle
Fig. 40 Jack position points.
Fig. 41 Cross member: positioning the jack on
the vehicle.
Place the jack* (vehicle tools) on firm
ground. If necessary use a large, strong
board or similar support. If the surface is slip-
pery (for example tiles) place the jack on a
rubber mat or similar to prevent it from slip-
ping .
Find the support point on the strut (sunken
area) closest to the wheel to be changed
›› Fig. 40.
Turn the jack* crank handle, located below
the strut support point, to raise it until the
tab 1 ›› Fig. 41 is below the housing provi-
ded.
Align the jack* so that tab 1 “grips” onto
the housing provided on the strut and the mo-
bile base 2 is resting on the ground. The
base plate 2 should fall vertically with re-
spect to the support point 1.
Continue turning the jack* until the wheel is
slightly lifted off the ground.
WARNING
The factory-supplied jack* is only de-
signed for changing wheels on this model.
On no account attempt to use it for lifting
heavier vehicles or other loads. Risk of in-
jury.
Make sure that the jack* remains stable.
If the surface is slippery or soft, the jack*
could slip or sink, respectively, with the re-
sultant risk of injury.
Only raise the vehicle with the jack* sup-
plied by the manufacturer. Other jacks,
even those approved for other SEAT mod-
els could slip, with the consequent risk of
injury.
Only mount the jack* on the support
points designed for this purpose on the
strut, and always align the jack correctly. If
you do not, the jack* could slip as it does
not have an adequate grip on the vehicle:
risk of injury!
You should never place a body limb such
as an arm or leg under a raised vehicle that
is solely supported by the jack.
If you have to work underneath the vehi-
cle, you must use suitable stands addition-
ally to support the vehicle, there is a risk of
accident!.
Never raise the vehicle if it is tilting to one
side or the engine is running.
Never start the engine when the vehicle is
raised. The vehicle may come loose from
the jack due to the engine vibrations.
CAUTION
The vehicle must not be raised on the
crossbar. Only place the jack* on the
points designed for this purpose on the
strut. Otherwise, the vehicle may be dam-
aged.
Removing and installing a wheel
Change the wheel after loosening the wheel
nuts and raising the vehicle with the jack.
When removing/fitting the wheel, the rim may
hit and damage the brake disc. For this rea-
son, please take care and get a second per-
son to assist you.
44
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seat Ibiza 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seat Ibiza 2020 in the language / languages: English as an attachment in your email.

The manual is 19.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seat Ibiza 2020

Seat Ibiza 2020 User Manual - German - 345 pages

Seat Ibiza 2020 User Manual - Dutch - 372 pages

Seat Ibiza 2020 User Manual - French - 356 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info