241If and when
–Remove the failed bulb and replace with a new bulb.
–Insert the bulb holder in the turn signal guide until it clicks into
place.
–First fit the turn signal in the opening in the chassis, fastening
the tabs 1 ⇒ Fig. 164, and then fit in the bulb as shown by the
arrow 2 ⇒ Fig. 164.
Number plate light
–Insert the flat part of a screwdriver into the special slot and re-
move the bulb.
–Remove the bulb holder, by turning it until it is free.
–Change the bulb.
–Replace the bulb holder, by turning it until it fits fully.
–Fit the light into the space and press until you hear a “click”.
Interior light and front reading light
Fig. 165 Front reading
light
To remove the glass
–Insert a fine screwdriver between the casing and the glass
⇒ Fig. 165.
–Carefully remove the glass, levering it to avoid possible dam-
age.
To replace the bulbs
–Pull the bulbs outwards.
–To remove the central bulb, hold and press to one side.
Assembly
–Proceed in the reverse order, pressing gently on the outer edge
of the side light.
Safety First Operating Instructions Practical Tips Technical Specifications
