98 Lights and visibility
Lights and visibility
Lights
Switching lights on and off
Fig. 54 Detailed view of
the dash panel: lights,
fog lights and rear fog
light switch
Switching on the side lights
–Turn the light switch ⇒ Fig. 54 to position .
Switching on dipped beam headlights
–Turn the light switch to position .
Switching off the lights
–Turn the light switch to position 0.
Switching on the front fog lights*
–Turn the switch from position or to the first stop and pull
it. The symbol in the light switch lights up.
Switching on the rear fog light (vehicles with front fog lights)
–Turn the lights control from position or to the second stop
and pull out ⇒ . A control lamp on the instrument panel lights
up.
Switching on the rear fog light (vehicles with no front fog lights)
–Turn the light control to the end from position or and pull
it. A control lamp on the instrument panel lights up.
WARNING
Never drive with just the side lights on. Risk of accident. The side lights
are not bright enough to illuminate the road ahead and to ensure that
other road users are able to see you. Always use your dipped beam head-
lights if it is dark or if visibility is poor.
Note
●The dipped beam headlights will only work with the ignition on. The side
lights come on automatically when the ignition is turned off.
●If the lights are left on after the key has been taken out of the ignition
lock, an audible warning sounds while the driver door remains open. This is
a reminder to switch the lights off.
