287If and when
–Position the bulb holder on the tail light and align it so that it is
securely seated.
–Press the bulb holder into the tail light until it engages.
–Check that all four retaining tabs ⇒ Fig. 228 -arrows- have en-
gaged.
–Re-install the tail light unit ⇒ page 287.
Fitting the tail light unit
The tail light unit is easy to fit.
Fig. 229 Fitting the tail
light unit
Fig. 230 Luggage com-
partment: Location of the
bolt securing the tail
light unit
–First place the tail light unit in ⇒ Fig. 229 arrow 1 in the hous-
ing.
–Gently press the tail light unit against the housing, first in posi-
tion 2 and then in position 3, until that the clips engage firm-
ly in the rubber mountings.
–Apply gentle pressure to the upper part of the tail light unit and
secure using the screwdriver, from the luggage compartment
⇒ Fig. 230 1.
–Try to move the tail light sideways to ensure it is correctly fitted.
–Fit the cover back onto the screw, with the notch pointing to the
rear 2.
–Make sure that all bulbs for the tail lights are working.
Safety First Operating Instructions Practical Tips Technical Specifications
