279If and when
Changing the side light bulb (inside of vehicle)
The procedure for changing the bulb is the same on both
sides.
Fig. 214 Side light bulb
(inside of vehicle)
Fig. 215 Side lights.
Bulb holder grip in verti-
cal position
–Switch off the ignition and the lights.
–Raise the bonnet.
–Move the brace ⇒ Fig. 214 1 in the direction of the arrow and
remove the rigid cover, separating the brace side and then re-
moving the two tabs from the other end of the cover.
–Remove the bulb and the bulb holder by pulling on the bulb
holder wiring.
–Separate the bulb from the bulb holder by pulling both pieces
anticlockwise.
–Fit the new bulb by pressing on the bulb holder.
–Insert the bulb into the socket so that the side of the bulb hold-
er grip is vertical ⇒ Fig. 215 and press on it.
–Fit the cover, first inserting the side tabs and then closing the
cover and the brace. Make sure that the gasket sits well on the
casing cover during the operation.
–Check whether the new bulb is working.
Changing bulbs. Bi-Xenon AFS headlights
Types of bulbs
Changing bulbs requires a certain degree of practical skill
You can change the following bulb for the exterior lights yourself:
●Bulb for headlights: Indicator light 12V/21W (PY21W)
The following bulbs should only be changed by a specialised workshop:
Safety First Operating Instructions Practical Tips Technical Specifications
