817458
289
Zoom out
Zoom in
Previous page
1/319
Next page
287If and when
How to jump start: description
Fig. 241 How to connect
the jump leads
On ⇒ fig. 241 A shows the flat battery and B the charged bat-
tery.
Jump lead terminal connections
Switch off the ignition of both vehicles ⇒  .
1. Connect one end of the red jump lead to the positive ⇒ fig. 241
+ terminal of the vehicle with the flat battery ⇒  .
2. Connect the other end of the red jump lead to the positive ter-
minal + in the vehicle providing assistance.
3. Connect one end of the black jump lead to the negative termi-
nal - on the battery of the vehicle providing assistance.
4. Connect the other end of the black jump lead X to a solid met-
al component which is bolted on to the engine block, or onto
the engine block itself of the vehicle with the flat battery. Do not
connect it to a point near the battery ⇒  .
5. Position the leads in such a way that they cannot come into
contact with any moving parts in the engine compartment.
Starting
6. Start the engine of the vehicle with the boosting battery and let
it run at idling speed.
7. Start the engine of the vehicle with the flat battery and wait one
or two minutes until the engine is running.
Removing the jump leads
8. Before you remove the jump leads, switch off the headlights (if
they are switched on).
9. Turn on the heater blower and heated rear window in the vehi-
cle with the flat battery. This helps minimise voltage peaks
which are generated when the leads are disconnected.
10. When the engine is running, disconnect the leads in reverse
order to the details given above.
Connect the battery clamps so they have good metal-to-metal contact with
the battery terminals.
If the engine fails to start, switch off the starter after about 10 seconds and
try again after about half a minute.
Safety First Operating Instructions Practical Tips Technical Specifications
289


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seat Exeo ST 2011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seat Exeo ST 2011 in the language / languages: English as an attachment in your email.

The manual is 5.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seat Exeo ST 2011

Seat Exeo ST 2011 User Manual - German - 331 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info