817351
49
Zoom out
Zoom in
Previous page
1/371
Next page
Self-help
Raise the vehicle
Fig. 38 Jack position points.
Fig. 39 Cross member: positioning the jack on
the vehicle.
Rest the jack (vehicles tools) on firm
ground. If necessary use a large, strong
board or similar support. If the surface is slip-
pery (for example tiles) place the jack on a
rubber mat or similar to prevent it from slip-
ping .
Find the support point on the strut (sunken
area) closest to the wheel to be changed
Fig. 38.
Turn the jack crank handle, located below
the strut support point, to raise it until the
tab 1 ››Fig. 39 is below the housing provi-
ded.
Align the jack so that tab 1 “grips” onto
the housing provided on the strut and the mo-
bile base 2 is resting on the ground. The
base plate 2 should fall vertically with re-
spect to the support point 1.
Continue turning the jack until the wheel is
slightly lifted off the ground.
WARNING
The factory-supplied jack is only designed
for changing wheels on this model. On no
account attempt to use it for lifting heavier
vehicles or other loads. Risk of injury.
Make sure the jack remains stable. If the
surface is slippery or soft, the jack could
slip or sink, respectively, with the conse-
quent risk of causing injuries.
Lift the vehicle using only the jack sup-
plied from the factory. Other jacks, even
those approved for other SEAT models
could slip, with the consequent risk of in-
jury.
Place the jack only at the support points
provided on the strut and align it. Other-
wise, the jack could slip because it does
not have sufficient grip on the vehicle: risk
of injury!
You should never place a body limb such
as an arm or leg under a raised vehicle that
is solely supported by the jack.
If you have to work underneath the vehi-
cle, you must use suitable stands addition-
ally to support the vehicle, there is a risk of
accident!.
Never raise the vehicle if it is tilting to one
side or the engine is running.
Never start the engine when the vehicle is
raised. The vehicle may come loose from
the jack due to the engine vibrations.
CAUTION
The vehicle must not be raised on the
crossbar. Place the jack only at the support
points provided on the strut and align it.
Otherwise, the vehicle may be damaged.
Removing and installing a wheel
Change the wheel after loosening the wheel
nuts and raising the vehicle with the jack.
When removing/fitting the wheel, the rim may
hit and damage the brake disc. For this rea-
son, please take care and get a second per-
son to assist you. »
47
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seat Ateca 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seat Ateca 2022 in the language / languages: English as an attachment in your email.

The manual is 17.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seat Ateca 2022

Seat Ateca 2022 User Manual - German - 397 pages

Seat Ateca 2022 User Manual - Dutch - 396 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info