817355
68
Zoom out
Zoom in
Previous page
1/348
Next page
The essentials
Raising the vehicle
Fig. 75 Crossbar: marks.
Fig. 76 Strut: mounting the jack on the vehi-
cle.
Place the jack* (vehicle tools) on firm
ground. If necessary use a large, strong
board or similar support. If the surface is slip-
pery (for example tiles) place the jack on a
rubber mat or similar to prevent it from slip-
ping .
Find the support point on the strut (sunken
area) closest to the wheel to be changed
Fig. 75.
Turn the jack* crank handle, located below
the strut support point, to raise it until the
tab 1 ›› Fig. 76 is below the housing provi-
ded.
Align the jack* so that tab 1 “grips” onto
the housing provided on the strut and the
mobile base 2 is resting on the ground. The
base plate 2 should fall vertically with re-
spect to the support point 1.
Continue turning the jack* until the wheel
is slightly lifted off the ground.
WARNING
Make sure that the jack* remains stable. If
the surface is slippery or soft, the jack* could
slip or sink, respectively, with the resultant
risk of injury.
Only raise the vehicle with the jack* sup-
plied by the manufacturer. Other vehicles
could slip, with the consequent risk of injury.
Only mount the jack* on the support points
designed for this purpose on the strut, and
always align the jack correctly. If you do not,
the jack* could slip as it does not have an ad-
equate grip on the vehicle: risk of injury!
The height of the parked vehicle can
change as a result of variations in tempera-
ture and loading.
CAUTION
The vehicle must not be raised on the cross-
bar. Only place the jack* on the points de-
signed for this purpose on the strut. Other-
wise, the vehicle may be damaged.
Removing and fitting a wheel
Change the wheel after loosening the wheel
bolts and raising the vehicle with the jack.
Taking off the wheel
Unscrew the wheel bolts using the box
spanner and place them on a clean surface.
Take off the wheel.
Putting on the spare wheel
When fitting tyres with a compulsory rotation
direction, observe the instructions in
page 67.
Mount the wheel.
Screw on the wheel bolts in position and
tighten them loosely with a box spanner.
Carefully lower the vehicle using the jack*.
Tighten the wheel bolts in diagonal pairs
using the wheel brace.
The wheel bolts should be clean and turn
easily. Before fitting the spare wheel, inspect
66
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seat Ateca 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seat Ateca 2018 in the language / languages: English as an attachment in your email.

The manual is 7.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seat Ateca 2018

Seat Ateca 2018 User Manual - German - 436 pages

Seat Ateca 2018 User Manual - Dutch - 364 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info