817393

Seat Alhambra 2021 Manual

49
Zoom out
Zoom in
Previous page
1/380
Next page
Self-help
If the wheel bolt is very tight, carefully push
on the end of the wheel wrench with your
foot. Hold on to the vehicle for support and
take care not to slip during this operation.
Loosening wheel nuts
●Fit the wheel wrench on as far as it will go
››› Fig. 45.
●Hold the wrench at the end and rotate the
bolt approximately one turn anticlock-
wise ››› .
Important information about wheel nuts
Factory-fitted rims and wheel nuts are spe-
cially matched during construction. There-
fore, if different rims are fitted, the correct
wheel nuts with the right length and heads
must be used. This ensures that wheels are
fitted securely and that the brake system
functions correctly.
In certain circumstances, you should not even
use wheel nuts from vehicles of the same
model.
In wheels with full hubcaps, the anti-theft
locking bolt must be threaded onto positions
››› Fig. 46 2 or 3, taking the tyre valve’s po-
sition as reference 1. Otherwise it will not be
possible to mount the hubcap.
WARNING
If the wheel nuts are not properly tight-
ened, they could come loose while driving
and cause an accident, serious injury and
loss of vehicle control.
●Use only wheel nuts which correspond to
the rim in question.
●Never use different wheel nuts.
●Wheel nuts and threads should be clean,
free of oil and grease, and it should be pos-
sible to screw them easily.
●To loosen and tighten wheel nuts, only
use the wheel wrench that came with the
car from the factory.
●The wheel nuts should only be loosened
slightly (about one turn) before raising the
vehicle with the jack. Risk of accident!
●Never apply grease or oil to wheel nuts or
to the wheel hub threads. Even if the bolts
have been tightened to the prescribed tor-
que, they could come loose while driving.
●Never loosen the screwed joints of wheel
rims with bolted ring trims.
●If wheel nuts are tightened below the
prescribed torque, the bolts and rims could
come loose while driving. If tightening tor-
que is too high, the wheel nuts or threads
can be damaged.
Raise the vehicle
Fig. 47 Jack position points.
Fig. 48 Jack mounted on the left rear part of
the vehicle
●Place the jack* (vehicle tools) on firm
ground. If necessary use a large, strong
board or similar support. If the surface is slip-
pery (for example tiles) place the jack on a
rubber mat or similar to prevent it from slip-
ping ››› .»
47
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seat Alhambra 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seat Alhambra 2021 in the language / languages: English as an attachment in your email.

The manual is 7.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seat Alhambra 2021

Seat Alhambra 2021 User Manual - German - 408 pages

Seat Alhambra 2021 User Manual - Dutch - 406 pages

Seat Alhambra 2021 User Manual - French - 420 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info