817368

Seat Alhambra 2019 Manual

52
Zoom out
Zoom in
Previous page
1/392
Next page
The essentials
●Hold the wheel brace at the end and rotate
the bolt approximately one turn anticlockwise
››› .
Important information about wheel bolts
The wheel rims and bolts have been de-
signed to be fitted to factory options. If differ-
ent rims are fitted, the correct wheel bolts
with the right length and correctly shaped
bolt heads must be used. This ensures that
wheels are fitted securely and that the brake
system functions correctly.
In some circumstances, wheel bolts from the
same model vehicle should not be used.
Wheel bolt tightening torque
The prescribed tightening torque for wheel
bolts for steel and alloy wheels is 140 Nm.
Have the tightening torque of the wheel bolts
checked as soon as possible with a reliable
torque wrench.
If wheel bolts are rusty and it is difficult to
tighten them, the threads should be replaced
and cleaned before checking the tighten-
ing torque.
Never grease or lubricate wheel bolts or the
wheel hub threads. Although they have been
tightened to the prescribed torque, they
could come loose while driving.
WARNING
If the wheel bolts are not fitted correctly
they could be released while driving lead-
ing to loss of vehicle control and serious
damage.
●Only use wheel bolts which correspond
to the wheel rims in question.
●Never use different wheel bolts.
●The bolts and threads should be clean,
free of oil and grease and easy to thread.
●To loosen and tighten the wheel bolts, al-
ways use the wheel brace supplied with the
vehicle.
●Loosen the wheel bolts only about one
turn before raising the vehicle with the jack.
●Never grease or lubricate wheel bolts or
the wheel hub threads. Although they have
been tightened to the prescribed torque,
they could come loose while driving.
●Never loosen the bolted joints of wheel
rims with bolted ring trims.
●If the wheel bolts are not tightened to the
correct torque, they may come loose while
driving, and the bolts and rims may come
out. If the tightening torque is too high, the
wheel bolts and threads can be damaged.
Raising the vehicle with the jack
Fig. 71 Jack position points.
Fig. 72 Jack mounted on the left rear part of
the vehicle
The jack may be applied only at the jacking
points shown (marks on chassis) ››› Fig. 71.
The mark indicates the jacking points below
the vehicle. The jacking points are on the ribs
behind the front edges ››› Fig. 72. Always the
relevant jacking point for the wheel to be
changed ››› .
50
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seat Alhambra 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seat Alhambra 2019 in the language / languages: English as an attachment in your email.

The manual is 8.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seat Alhambra 2019

Seat Alhambra 2019 User Manual - German - 404 pages

Seat Alhambra 2019 User Manual - Dutch - 416 pages

Seat Alhambra 2019 User Manual - French - 424 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info