817367
56
Zoom out
Zoom in
Previous page
1/324
Next page
The essentials
How to jump start: description
Fig. 74 Diagram of connections for vehicles
without Start-Stop system.
Fig. 75 Diagram of connections for vehicles
with Start-Stop system.
Jump lead terminal connections
Switch off the ignition of both vehicles
.
1.
Connect one end of the red jump lead to
the positive + terminal of the vehicle
with the flat battery A Fig. 74.
Connect the other end of the red jump
lead to the positive terminal + in the
vehicle providing assistance B.
For vehicles without Start-Stop system:
connect one end of the black jump lead
to the negative terminal of the vehi-
cle providing the current B Fig. 74.
For vehicles with Start-Stop system: con-
nect one end of the black jump lead X
to a suitable ground terminal, to a solid
piece of metal in the engine block, or to
the engine block itself Fig. 75.
Connect the other end of the black jump
lead X to a solid metal component bol-
ted to the engine block or to the engine
block itself of the vehicle with the flat
battery. Do not connect it to a point near
the battery A.
Position the leads in such a way that
they cannot come into contact with any
moving parts in the engine compart-
ment.
Starting
Start the engine of the vehicle with the
boosting battery and let it run at idling
speed.
2.
3.
4a.
4b.
5.
6.
7.
Start the engine of the vehicle with the
flat battery and wait for 2 or 3 minutes
until the engine is running.
Removing the jump leads
Before you remove the jump leads,
switch off the dipped beam headlights if
they are switched on.
Turn on the heater blower and heated
rear window in the vehicle with the flat
battery. This helps minimise voltage
peaks which are generated when the
leads are disconnected.
When the engine is running, disconnect
the leads in reverse order to the details
given above.
Make sure the battery clamps have sufficient
metal-to-metal contact with the battery termi-
nals.
If the engine fails to start after about 10 sec-
onds, switch off the starter and try again after
about 1 minute.
WARNING
Please note the safety warnings referring to
working in the engine compartment
page 271.
The battery providing assistance must have
the same voltage as the flat battery (12V) and
approximately the same capacity (see imprint
on battery). Failure to comply could result in
an explosion.
8.
9.
10.
11.
54
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seat Alhambra 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seat Alhambra 2018 in the language / languages: English as an attachment in your email.

The manual is 7.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seat Alhambra 2018

Seat Alhambra 2018 User Manual - German - 348 pages

Seat Alhambra 2018 User Manual - Dutch - 340 pages

Seat Alhambra 2018 User Manual - French - 352 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info