23Seat belts
Fastening the seat belt
Fasten your seat belt before each trip.
●Adjust the front seat and head restraint correctly ⇒ page 10.
●Engage the seat backrest of the rear seat in an upright position ⇒ .
●Pull the latch plate and place the belt webbing evenly across your chest
and lap. Do not twist the seat belt when doing so ⇒ .
●Engage the latch plate in the buckle of the corresponding seat ⇒ Fig. 10.
●Pull the belt to ensure that the latch plate is securely engaged in the
buckle.
Unfastening the seat belt
The seat belt must not be unfastened until the vehicle has come to a stand-
still ⇒ .
●Press the red button on the buckle ⇒ Fig. 11. The latch plate is released
from the buckle.
●Guide the belt back by hand so that it rolls up easily and the trim will not
be damaged.
WARNING
An incorrectly worn seat belt web can cause severe or fatal injuries in the
event of an accident.
●The seat belt cannot offer its full protection unless the seat backrests
are in an upright position and the seat belt is worn correctly, according to
your size.
●Unbuckling your seat belt while the vehicle is in motion can cause se-
vere or fatal injuries in the event of an accident or sudden braking.
Fastening or unfastening the seat belt with two buckles
Fig. 12 Fasten the seat
belt on the centre seat in
the second row of seats
Properly worn seat belts hold the vehicle occupants in the position that
most protects them in the event of an accident or sudden braking ⇒ .
The seat belts for the centre seat in the second row of seats and for the
seats in the third row of seats are fastened using two buckles.
Fastening the seat belt
Fasten your seat belt before each trip.
●Adjust the rear seat and head restraint correctly ⇒ page 10.
●Engage the seat backrest of the rear seat in an upright position ⇒ .
●Use latch plate of the belt ⇒ Fig. 12 1 to pull the seat belt down. Do not
twist the seat belt when doing so ⇒ .
●Engage the latch plate 1 in the buckle of the corresponding seat A.
●Use the latch plate 2 to pull the seat belt across your lap.
●Engage the latch plate 2 in the buckle of the corresponding seat B.
●Pull the belt to ensure that both latch plates are securely engaged in the
buckles.
Safety First Operating instructions Practical tips Technical Specifications
