9
VII. Care and maintenance (After your dive)
1) After each dive, soak the sealed light in fresh water for about
15 minutes to remove any residual salt, sand and dirt. Never
allow the saltwater to dry on the light.
2) Push the mode button about 10 times to clean any saltwater or
sand trapped under the button.
3) Let the water drain out of the two small holes located at the
bottom of flexible arm (under the tray)
4) Dry off the light with a towel. Make sure you and the light are
dry before opening the waterproof battery cap.
5) Remove batteries before storing the light.
6) Allow light to thoroughly dry before storage.
7) Never use any detergents, cleaners, solvents or chemicals to
clean the light.
8) Insert a fresh Moisture-Muncher capsule (item #SL911) inside
the battery compartment during storage to help keep the inside
dry and free of corrosion or mildew during storage.
