Manual SeaLife Digital Pro Flash (page 19 of 40) (English)

621580

Zoom out

Zoom in

1/40

Finalize Pre-Flash setting for non-SeaLife digital camer

Follow these steps to determine the correct Pre-Flash setting for

your non-SeaLife camera:

1. Set the pre-flash setting to #4.

2. Power on the camera and flash.

a. Make sure the camera settings are set as described in

section III of this manual.

b. Turn the flash brightness power knob on the back of the

flash to 9 or 10 position. (Not Auto position)

3. Wait for the red flash-ready light to turn on.

4. Take a test picture of an object about 3ft/1m shooting distance.

5. Review the picture on your camera.

6. Is the picture dark or very bright (possibly overexposed)?

a. If the picture is a dark picture, move the pre-flash setting

switch down by one (For example, from #4 to #3) and

repeat steps 3 to 6.

b. If the picture is bright (possibly overexposed) the pre-

flash setting is correct. You have now finalized your pre-

flash setting.

Note: Once you have determined the correct pre-flash setting for your

camera, you should not have to change it again. This will become

your permanent pre-flash setting unless you change cameras.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SeaLife Digital Pro Flash in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SeaLife Digital Pro Flash

SeaLife Digital Pro Flash User Manual - German - 40 pages

SeaLife Digital Pro Flash User Manual - Dutch - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SeaLife Digital Pro Flash Manual

Product: