29
Using the Digital Flash variable power
adjustment:
If the test image is over exposed (white or
washed out colors), turn the power adjust-
ment clockwise to the first “bar” and take
another picture. Do this until the image
exposure is satisfactory. If the test image is
under exposed (dark), make sure the
power adjustment is on full power (com-
pletely counter clock-wise). If the power
adjustment is turned to full power, and the
image is under exposed, it normally indi-
cates the subject is too far away, beyond
the reach of the Digital Flash or the flash
did not fire. The maximum reach is 6 to 8ft
(2.5m) depending on water visibility.
Note: If the Digital Flash did not fire, refer to the trouble shooting guide
in section IX.