290716
101
Zoom out
Zoom in
Previous page
1/110
Next page
EN-101
How to set-up the Waterproof Housing
Set up camera
1. Insert charged battery (Lithium ion type 3.7V 650 mAh). Make sure you insert the batteries with the
correct + and – polarity.
2. Clean camera lens with dry, clean cotton cloth.
3. Remove camera strap since this may prevent the camera from correctly seating itself inside the
housing.
4. Set camera to Sea mode. If you are using an External Flash, set camera to External Flash mode.
See page 37 for detailed instructions on how to set camera to Sea or External Flash modes.
Set up housing
Opening and loading of the housing should be done only in dry cool air, such as in an air-
conditioned room to prevent trapping moist air in the housing which can cause the housing to fog
while underwater.
1. Open the housing by pushing in small locking tab and lift latch up. Do not extend housing lid beyond
its stop point or damage may occur to the hinge area.
2. Carefully inspect O-ring for damage and make sure O-ring is firmly seated in its groove. If O-ring is
damaged and requires replacement, contact your local authorized SeaLife dealer or SeaLife Service
Center.
3. Clean the housing glass lens port using clean, dry cotton cloth. It is recommended to apply anti-fog
solution to the inside surface of the housing lens port.
4. Carefully insert camera into housing. Make sure camera is clean and dry.
5. Insert one Anti-Fog desicant capsules into special slot inside housing moist air, it turns from blue to
light pink. Replace desicant capsule when color changes to light pink.
6. Carefully clean O-ring and O-ring contact surfaces with cleaning brush provided in Care Kit. O-ring
must not be wet when sealing housing, allow these areas to dry.
O-ring must be absolutely clean of all hair, sand or other small particles.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SeaLife dc 500 reefmaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SeaLife dc 500 reefmaster in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SeaLife dc 500 reefmaster

SeaLife dc 500 reefmaster User Manual - German - 110 pages

SeaLife dc 500 reefmaster User Manual - French - 110 pages

SeaLife dc 500 reefmaster User Manual - Spanish - 110 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info