50
Format
This option formats the internal memory (or
memory card ) and erases all stored images
and data. To perform the format function, first
press the button. Then select [Yes] by
using the / button and press OK. A
progress bar displays, showing the progress of
formatting.
Beep
The camera makes a sound (beep) each time
you press the camera button if this function is
enabled. Press the button. Select [On] or
[Off] by using the / button and then press
OK.
Power off
If the camera goes unused for a certain period
of time while the camera is powered on, the
camera will switch to an idle mode, and even-
tually turn itself off to conserve power.
Inactivity period Inactivity period Camera status
(batteries) (AC power adapter)
60 seconds 60 seconds stay idle
3 minutes 30 minutes shut off
If the camera is idle, re-activate the camera by pressing any button or switch the
mode dial. If the camera has powered-off you must turn the camera on again by
pressing the button. The table (above) shows the default time settings for idle,
and power-off. To change the power saving interval, first press the button.
Then select the power-off interval you prefer by using the / button and
press OK.
[3 min], [5 min], [10 min], [30 min]
