468757
10
Zoom out
Zoom in
Previous page
1/16
Next page
Seagate Replica User Guide 10
2. Visit http://support.seagate.com/ and navigate to Replica Support. Download the hard disk recovery image file (file type: .iso)
to your desktop or another folder of your choice. You will use this image file to create a new CD-ROM.
3. Double-click on the icon for the downloaded image file. This launches the application where you can create CDs.
4. Follow the procedures in the application that lets you burn the downloaded image to the CD. Unlike merely copying the file to
the CD, burning the image creates a CD that your computer can boot up from.
5. After the image is burned to the CD-ROM, remove the CD from the drive and label it “Seagate Replica Hard Disk Recovery”.
Store it in a safe location.
Recovering your Hard Disk
To perform a full hard disk recovery, follow these steps:
1. Replace the malfunctioning hard disk with a new hard disk according to the hardware instructions.
2. Insert your Replica CD-ROM, or the updated CD-ROM you made in “Creating an Updated CD-ROM for Hard Disk Recovery”, into
the CD-ROM drive as follows: Turn on the power to the computer long enough to open the CD-ROM drive and insert the Replica
CD¬ROM. Close the CD-ROM drive. Turn off the power to the computer.
3. Connect Replica to the computer USB port.
4. Turn on the power to your computer. The computer should start and boot from the Replica CD-ROM. If it does not, you may need to
make changes to the system BIOS to permit booting the computer from the CD-ROM. See the documentation for your computer for
detailed instructions on how to do this.
5. Follow the on-screen instructions provided by the recovery software. You must select a recovery point, which is typically the date of
the most recent backup. Replica restores your entire computer onto the new hard disk, exactly as it was at the selected backup time.
Caution: Do not interrupt the recovery process. It is likely to take several hours. Replica will prompt you when your system has
been recovered.
6. Once Replica has recovered your computer on the new hard drive, it engages to provide continuous backup of your computer.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seagate Replica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seagate Replica in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info