Manual Scubapro MERIDIAN (page 51 of 58) (English)

550298

Zoom out

Zoom in

1/58

5. Meridian PC interface

English

SCUBAPRO MERIDIAN

5. MERIDIAN PC

INTERFACE

5.1 Cradle

The communication between Meridian and

PC/MAC is possible only with a cradle.

The communication between the Meridian

and the cradle is established via the contact

on the case. Therefore if the water contact

or the spring contact of the cradle has dirt

on the surface, this should be cleaned with

a piece of clothing before use.

To avoid scratching your Meridian, ﬁrst

place contacts together and then click the

Meridian to the cradle.

5.2 Introduction to

SCUBAPRO LogTRAK

LogTRAK is the software that allows

Meridian to communicate with a Windows-

based PC or Mac OS.

In order to take advantage of any of

these features, you need to establish a

communication between your PC and

Meridian with a cradle.

To start the communication

1. Connect the cradle to your PC:

2. Launch SCUBAPRO LogTRAK on your

3. Select the serial port where the cradle is

connected

Extras -> Options -> download

Select the COM port that is used for

Meridian cradle.

4. Place the Meridian on the cradle

5.2.1 Download dive

From LogTrak, by selecting Dive -> Cradle:

Download Dives you can transfer the

Meridian Logbook to your PC or MAC.

There are three main views each showing a

speciﬁc part of your dive logs:

• Prole showing the graphical data of

the dive.

• Details about the dive, where you can

edit for example the equipment and

tank information.

• Location, which shows your dive site at

the world map.

The selection tabs for views are on the top

of the main window.

Hi. What is error message E37 on the Meridian. Just did a dive and computer would not go into dive mode. When I came out it said E 37 Submitted on 27-4-2024 at 12:45
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scubapro MERIDIAN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scubapro MERIDIAN

Scubapro MERIDIAN User Manual - German - 58 pages

Scubapro MERIDIAN User Manual - Dutch - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scubapro MERIDIAN Manual

Product: