Manual Scubapro MERIDIAN (page 43 of 58) (English)

550298

Zoom out

Zoom in

1/58

3. Meridian as a dive computer

English

SCUBAPRO MERIDIAN

CNS O

reaches 100%, Meridian will emit a

sequence of audible beeps for 12 seconds

and the value of the CNS O

will be ﬂashing

in the lower right corner. The ﬂashing will

continue until the value of CNS O

drops

under 100%.

CNS O

= 100%

The audible signal is repeated for 5

seconds in one minute intervals after the

ﬁrst occurrence and for as long as the value

of CNS O

stays at or above 100% or until

the ppO

drops under 0.5bar (see chapter

3.10 Diving with nitrox or with another

decompression gas for a list of depths at

which ppO

equals 0.5bar for some typical

Nitrox mixes).

3.11.10 Missed decompression stop

WARNING

Violating a mandatory decompression

obligation may result in serious injury or death.

Omitted deco stop

If in presence of a required decompression

stop you ascend more than 0.5m/2ft above

the required stop, Meridian will trigger an

alarm: the value of the current depth and

the value of the required stop depth will

ﬂash, and a sequence of beeps can be

heard. This will continue for as long as you

stay 0.5m/2ft or more above the required

stop.

3.11.11 Low battery

WARNING

Do not start a dive if the battery symbol

is displayed ﬂashing on the screen on the

surface. The dive computer may fail to function

during the dive and this could lead to serious

injury or death.

During the dive, Meridian alerts you of

precarious battery situations in two ways:

By displaying a steady battery symbol on

the screen. This means you can ﬁnish the

dive but you should replace the battery

once you return to the surface;

By displaying a ﬂashing battery symbol on

the screen. This means you need to start

the procedure to terminate the dive, as

there is not enough energy in the battery

to ensure proper continued functioning and

the dive computer may fail. If the battery

symbol is ﬂashing, the backlight cannot

be activated and the audible warnings and

alarms are not available anymore.

3.11.12 Setting bookmarks

By press and hold LIGHT button you can

set any number of bookmarks as reminders

of particular moments during the dive. The

bookmarks will appear on the dive proﬁle

in JavaTRAK.

3.11.13 Safety stop timer

If a minimum depth of 10m/30ft has

been reached during the dive, at a depth

of 5m/15ft the safety stop timer will

automatically start a countdown. If you go

below 6.5m/20ft, the timer will disappear

and the no-stop time is shown again. Upon

returning to 5m/15ft, the timer will start

again automatically. As long as you are

Hi. What is error message E37 on the Meridian. Just did a dive and computer would not go into dive mode. When I came out it said E 37 Submitted on 27-4-2024 at 12:45
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scubapro MERIDIAN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scubapro MERIDIAN

Scubapro MERIDIAN User Manual - German - 58 pages

Scubapro MERIDIAN User Manual - Dutch - 58 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scubapro MERIDIAN Manual

Product: