550298
32
Zoom out
Zoom in
Previous page
1/58
Next page
32
3. Meridian as a dive computer
SCUBAPRO MERIDIAN
3. Meridian as a dive computer
3.6 Diving with Meridian
The functions of the buttons during diving 
are summarized in the table below.
Note that Meridian can be set to three dive 
modes: SCUBA, APNEA and GAUGE. Due 
to  the  operation  differences  also  buttons 
have different functions in each mode. 
LIGHT
(Left upper
button)
Short press = backlight,
Long press = bookmark
+/UP
(Right upper
button)
Short press = alternative display data
Short press in APNEA mode = switch between HR and ASC speed
on display
Short press in GAUGE mode = alternative display data
Long press in GAUGE mode = reset average depth counter
-/DOWN
(Right lower
button)
Short press = reset safety stop timer
Long press in APNEA mode = manual start and end the dive
Short press in GAUGE mode = start/stop timer
SEL/ESC
(Left lower
button)
Long press = select manual gas switch
Short press (after long) = enter manual gas switch
3.6.1 Display information
Upon immersion, Meridian will automatically 
start to monitor the dive regardless of what 
state  it  was  in  prior  to the  immersion.
Details on the information displayed can be 
found in the next sections.
The dive time is displayed in minutes. If during 
the dive you ascend to the surface, the time 
spent on the surface will only be counted if 
you  descend  again  below  0.8m/3ft  within 
5  minutes.  This  allows  for  brief periods 
of  orientation.  While  on  the surface, the
time  will  not  show  as  progressing  but  it 
is  running in  the  background.  As  soon 
as  you submerge, the time will resume, 
including the  time  spent on the surface. If 
you  spend  more than  5  minutes  at  depth 
shallower  than  0.8m/3ft,  the  dive  will  be 
considered ended, the logbook closed and 
a subsequent immersion would cause  the 
dive time to start again from zero.
Maximum  displayed  time  is  999  minutes. 
For  dives  longer  than  that,  the  dive  time 
starts again from 0 minutes.
Current depth Dive time
Max depth No-stop time
Dive display limits (mertic)
32


Need help? Post your question in this forum.

Forumrules
1

Forum

scubapro-meridian

Reset search

  • Hi. What is error message E37 on the Meridian. Just did a dive and computer would not go into dive mode. When I came out it said E 37 Submitted on 27-4-2024 at 12:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scubapro MERIDIAN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scubapro MERIDIAN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scubapro MERIDIAN

Scubapro MERIDIAN User Manual - German - 58 pages

Scubapro MERIDIAN User Manual - Dutch - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info