550298
23
Zoom out
Zoom in
Previous page
1/58
Next page
3. Meridian as a dive computer
3. Meridian as a dive computer
23
English
SCUBAPRO MERIDIAN
The dive computer functions of Meridian on 
the surface include, among others, setting 
the oxygen concentration for nitrox diving, 
setting the MB level of the decompression 
algorithm,  setting  various  warnings  and 
personal  preferences,.  To  reach  any  of 
these functions,  Meridian  must  be  in Dive 
surface mode display. This can be reached 
pressing  the  –/DOWN  button  once  from 
the  main  time  and  date  display,  until  text 
SCUBA, GAUGE or APNEA  is shown (after 
a dive, more information may appear – this 
is described later in this chapter).
3.1.1 Dive mode at surface
When you  have not been diving with  your 
Meridian  for  a  while  (no  desaturation  left) 
the  dive  mode  may  appear  as  shown 
below:
However in SCUBA mode after a dive, the 
display may appear as shown below:
From here (SCUBA mode, after a dive), by 
pressingthe SEL/ESC  button and scrolling 
with the +/UP or –/DOWN buttons, you can 
access a loop of additional menus related 
to  diving,  which  are:  surface  interval,  set 
gas,  set  scuba,  set  apnea  and  algorithm 
select.
3.1.2 Surface interval counter
After a dive the Meridian shows the surface 
interval  from  the  latest  dive.  The  surface 
interval  counter  counts  until  desaturation 
is  complete.  After  the  desaturation  is 
complete this menu disappears.
The no-fly time is shown at the upper row 
on the right corner in hours.
No-fly time
Surface interval
3.2 Gas settings
3.2.1 Set Gas 1
You  may  use  your  Meridian  with  all  nitrox 
mixes from Air to pure oxygen. 
By  pressing  the SEL/ESC button in  this 
display  the  oxygen  mix  of  Gas 1  starts 
flashing. By pressing the +/UP or –/DOWN 
button you may scroll the value from 21 up 
to 100%. 
WARNING
Diving with a ppO
2
higher than 1.4 is dangerous
and may lead to unconsciousness, drowning
and death.
By pressing SEL/ESC the maximum partial 
pressure  of  oxygen  (ppO
2
 max)  starts 
flashing. By pressing the +/UP or –/DOWN 
button you may select the value from 1.00 
bar up to 1.60 bar. 
23


Need help? Post your question in this forum.

Forumrules
1

Forum

scubapro-meridian

Reset search

  • Hi. What is error message E37 on the Meridian. Just did a dive and computer would not go into dive mode. When I came out it said E 37 Submitted on 27-4-2024 at 12:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scubapro MERIDIAN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scubapro MERIDIAN in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scubapro MERIDIAN

Scubapro MERIDIAN User Manual - German - 58 pages

Scubapro MERIDIAN User Manual - Dutch - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info