550267
36
Zoom out
Zoom in
Previous page
1/52
Next page
36
ALADIN SQUARE USER MANUAL
2.6.5 L0 no stop time = 2 minutes
when diving an MB level
When diving with an MB level higher than
L0, the underlying L0 information is not
directly visible on the display (though it is
accessible as alternate information). You
can choose to have Square warn you when
the underlying L0 no-stop time reaches 2
minutes while diving with an active MB level
higher than L0.
Square emits a sequence of audible beeps
and the MB LVL symbol blinks, both for
12 seconds, when the L0 no-stop time
reaches 2 minutes while diving with an
active MB level higher than L0.
2.6.6 Entering deco when diving
an MB level
When diving with an MB level higher than
L0, the underlying L0 information is not
directly visible on the display (though it is
accessible as alternate information). You
can choose to have Square warn you when
you are about to enter a decompression
obligation while diving with an active MB
level higher than L0.
Square emits a sequence of audible beeps
and the DECO STOP symbol blinks, both
for 12 seconds, when the L0 no-stop time
ends while diving with an active MB level
higher than L0.
Alarms can not be turned off because
they represent situations that do require
immediate action by the diver. There are
ve different alarms:
WARNING:
- When in gauge mode, all warnings and all
alarms are OFF aside for the low battery alarm.
- When Square is set to SOUND OFF mode, all
audible alarms and warnings are switched off.
2.6.7 Ascent rate
As you ascend during a dive, the pressure
surrounding you diminishes. If you ascend
too quickly, the ensuing pressure reduction
could lead to microbubble formation. If you
ascend too slowly, the continued exposure
to high ambient pressure means that you
will continue loading some or all of your
tissues with nitrogen. Consequently, there
is an ideal ascent rate that is slow enough
to minimize microbubble formation yet fast
enough to minimize the effect of continued
loading on your tissues.
The pressure reduction that the body can
tolerate without signifi cant microbubble
formation is higher at depth than it is in
the shallows: The key factor is not the
pressure drop by itself, but rather the ratio
of the pressure drop relative to the ambient
pressure. This means that the ideal ascent
rate at depth is higher than it is in the shallows.
Along these lines, Square employs a
variable ideal ascent rate: its value ranges
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scubapro Aladin Square at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scubapro Aladin Square in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info