550267
9
Zoom out
Zoom in
Previous page
1/52
Next page
9
English
ALADIN SQUARE USER MANUAL
1.0.8 Checking the Altitude
At the altitude menu the current altitude is
calculated from the barometric pressure
and shown at the bottom row left. The
current altitude class is shown at middle row
right and this is used as ambient pressure for
diving algorithm calculations. At the bottom
row right the current temperature is shown.
NOTE: barometric pressure is a variable
changing with weather and atmospheric
pressure at that elevation. Dive algorithm
uses Altitude Classes which are directly
derived from the barometric pressure.
Altitude is counted from the current
barometric pressure and it is therefore a
relative value.
The altitude can be adjusted when current
elevation is known by pressing the SEL. The
altitude value will start blinking. By pressing
right or left the value can be adjusted in
10m/50feet steps. By pressing SEL you
can confi rm the altitude value. Adjusting the
altitude elevation has no effect on altitude
class. More about diving in altitudes is
explained in chapter Altitude diving.
NOTE: Different combinations m&˚C,
Ft&˚C, m&˚F or Ft&˚F can be selected
from the dive mode menu: Units.
1.0.9 Planning a dive
Planner
Surface
Interval
Depth/
time
ESC
ESC
SEL
SEL
SEL
You can plan your next dive based on your
body’s nitrogen saturation. The planner is
also using following information:
1. Selected oxygen concentration and
active tanks
2. Selected water type
3. Selected MB level
4. Water temperature of the most recent dive
5. Altitude range
6. Status of tissue saturation at the time the
planner is started
7. A normal workload of the diver and
observance of the prescribed ascent rates.
By pressing SEL at the planner menu you
will get into the planner directly or to the
surface interval setting (repetitive dive).
NOTE: When Square is in Gauge or
Apnea modes the Planner is disabled
and Planner OFF is shown in this menu.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scubapro Aladin Square at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scubapro Aladin Square in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info