779983
150
Zoom out
Zoom in
Previous page
1/158
Next page
EN ISO 4210-2 / EN ISO 8098 / EN 15194
TRANSLATION OF THE ORIGINAL
SCOTT OPERATING INSTRUCTIONS
TREKKING AND TREKKING-PEDELEC
WWW.SCOTT-SPORTS.COM
ENGLISH
| 02 ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
WARNING
Read at least pages 13-38 before your first ride!
Perform the functional check on pages 38-42 before every ride!
Observe the chapter “Intended use of your SCOTT bike”.
For the SCOTT service plan and the SCOTT handover report read the Quick
Start Manual.
SAFETY INSTRUCTIONS
Your bike and the translation of these original operating instructions comply
with the requirements of the EN ISO standards 4210-2 Cycles – Safety
requirements for bicycles and 8098 Cycles – Safety requirements for
bicycles for young children as well as the European standard EN 15194.
ENGLISH 03 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
Imprint:
V8.1, July 2020
Technical details in the text and illustrations of this manual are subject to
change.
© No part of this publication may be reprinted, translated, copied or transmitted
in any form or by any means, electronic, mechanical, by hand or otherwise for
another business purpose without prior written permission of Zedler – Institut
für Fahrradtechnik und -Sicherheit GmbH.
© Text, concept, photos and graphic design
Zedler – Institut für Fahrradtechnik und -Sicherheit GmbH www.zedler.de and
SCOTT SPORTS SA www.scott-sports.com
TRANSLATION OF THE ORIGINAL SCOTT OPERATING
INSTRUCTIONS
Read the translation of these original SCOTT operating instructions. For addi-
tional information on your bicycle and the web links for the component manu-
facturers, please visit the manual pages of the bike brand you have purchased
via your Quick Start Manual. Together with the manuals of the component
manufacturers and the system instructions of the drive manufacturer and the
translation of these original SCOTT operating instructions is part of a system.
If the translation of these original SCOTT operating instructions will not deliv-
er the responses to all questions and before changing any settings, ask your
SCOTT dealer.
SAFETY INSTRUCTIONS
For additional information on your bicycle and the web links for the com-
ponent manufacturers, please visit the manual pages of the bike brand you
have purchased via your Quick Start Manual.
The translation of these original operating instructions is subject to Europe-
an law and the EN/ISO standards. If delivered to countries outside Europe,
supplementary information has to be provided by the importer of the
SCOTT bike, if necessary.
Inform yourself on www.scott-sports.com
WWW.SCOTT-SPORTS.COM
ENGLISH
| 04 ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
SCOTT CITY/TREKKING BIKE
SCOTT PEDELEC
16
18
19
20
21
22
23
24
26
27
28
29
30
31
32
1
2
3
4
5
6
7
9
10
11
12
14
15
II
III
I
1
2
7
IV
A
B
C
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
1
2
3
4
5
8
6
7
9
11
10
12
13
14
15
II
III
IV
1
2
4
I
6
5
7
6
5
4
ENGLISH 05 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
SCOTT PEDELEC
1 Saddle
2 Seat post
3 Seat post clamp
4 Pannier rack
5 Rear light
6 Brake rear
7 Rotor
8 Front derailleur
9 Cassette sprockets
10 Rear derailleur
11 Kickstand
12 Chain
13 Chainring
14 Crank
15 Pedal
16 Stem
17 Bell
18 Handlebars
19 Brake lever
20 Shifter
21 Headset
22 Front lamp
23 Brake front
24 Rotor
25 Hub dynamo
Wheel:
26 Quick-release/
thru axle
27 Spoke
28 Rim
29 Reflector ring
30 Tyre
31 Hub
32 Valve
Frame:
1 Top tube
2 Down tube
3 Central tube
4 Seat tube
5 Chainstay
6 Seat stay
7 Head tube
Suspension fork:
I Fork crown
II Stanchion tube
III Lower leg
IV Drop-out
A Motor
B Rechargeable battery
C Display and command
console
16
18
19
20
21
22
23
24
26
27
28
29
30
31
32
3
4
5
7
1
2
3
4
5
6
7
9
10
11
12
14
15
A
B
C
II
III
IV
I
6
ENGLISH
| 06 ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
TABLE OF CONTENTS
SAFETY AND BEHAVIOUR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
INTENDED USE OF YOUR SCOTT BIKE . . . . . . . . . . . . . . . . . . . . . . . . 17
Notes on the maximum permissible overall weight . . . . . . . . . . . . . . . . . 22
Notes on the transport of loads and on carrying children and/or
pets with your Scott bike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Permission for use of a trailer with your Scott bike . . . . . . . . . . . . . . . . . . . . .22
Permission for use of a child seat on your Scott bike. . . . . . . . . . . . . . . . . . . .25
TESTS BEFORE YOUR FIRST RIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Additional information “Tests before your first ride” with your Scott pedelec 35
TESTS BEFORE EVERY RIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Additional information “Tests before every ride” with your Scott pedelec. . . 41
USING QUICK-RELEASES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Safe fastening of a component with a quick-release . . . . . . . . . . . . . . . . . . . .43
THRU AXLES ON THE SCOTT BIKE. . . . . . . . . . . . . . . . . . . . . . . . . . .44
ADJUSTING THE SCOTT BIKE TO THE RIDER . . . . . . . . . . . . . . . . . . . 45
Adjustment of the saddle to the correct height. . . . . . . . . . . . . . . . . . . .46
Adjustment of the height of the handlebars . . . . . . . . . . . . . . . . . . . . . .49
Stems - conventional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Stems - adjustable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Stems for threadless systems – Aheadset® . . . . . . . . . . . . . . . . . . . . . . . . . 52
Saddle adjustment – fore-to-aft position and horizontal tilt . . . . . . . . . . . . . . . .54
Adjustment of saddle position and tilt. . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Cockpit adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Brake lever reach adjustment on Scott city, trekking, urban and kids’ bikes . . . . . . .58
Adjustment of handlebar tilt and brake levers on Scott city, trekking,
urban and kids’ bikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Bar ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
SUSPENSION ON SCOTT BIKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Front suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Adjusting the spring rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Adjusting the damping control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Suspension seat posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
BRAKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
ENGLISH 07 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
Rim brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
V-Brakes and cantilever brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Disc Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Hydraulic disc brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Mechanical disc brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Roller, drum and back-pedal brakes . . . . . . . . . . . . . . . . . . . . . . . . . . .78
GEARS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Derailleur gears. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Operation and control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Checking and readjusting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Adjusting the rear derailleur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Adjusting the front derailleur. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Multi-speed hubs (internal gear hubs). . . . . . . . . . . . . . . . . . . . . . . . . .87
Operation and control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Check, readjustment and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Adjusting multi-speed hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
GATES belt drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Maintenance and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Checking the belt tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
BICYCLE CHAIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Chain maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
WHEELS AND TYRES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Notes on tyres, inner tubes, rim tape, inflation pressure . . . . . . . . . . . . . . 93
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Rim trueness and spoke tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
REPAIRING TYRE PUNCTURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Removing the wheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Clincher and folding tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Tyre removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Tyre mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Remounting the wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
TESTS AFTER AN ACCIDENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Additional information “Tests after an accident” with your Scott pedelec . . 104
THE HEADSET ON THE SCOTT BIKE . . . . . . . . . . . . . . . . . . . . . . . . . 105
Conventional headsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
ENGLISH
| 08 ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
Threadless headset – Aheadset® . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
RIDING A SCOTT PEDELEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Riding with motor assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Useful information for a long ride . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Riding without motor assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
USEFUL FACTS FOR RIDING A SCOTT SPEED PEDELEC . . . . . . . . . . . . 113
INFORMATION FOR PROPER HANDLING OF THE RECHARGEABLE
BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
SCOTT KIDS’ BIKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Useful information for parents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
LIGHTING OF YOUR SCOTT BIKE . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Dynamo-operated lighting system. . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Rear lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Front lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Hub dynamo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Special case – pedelecs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Battery-operated or rechargeable-battery-operated lighting . . . . . . . . . 124
USEFUL FACTS ABOUT THE SCOTT BIKE . . . . . . . . . . . . . . . . . . . . . 125
Helmets and glasses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Clothing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Pedals and shoes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Bar ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Bicycle locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Puncture kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Cycle computers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Kickstand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Mudguards/wheel protections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
TRANSPORTING LUGGAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
TRANSPORTING CHILDREN ON YOUR SCOTT BIKE . . . . . . . . . . . . . . 132
Using a child carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
ENGLISH 09 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
Using a child trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Using kids’ tandem bikes/trailer systems. . . . . . . . . . . . . . . . . . . . . . . 133
TRANSPORT OF THE SCOTT BIKE OR SCOTT PEDELEC . . . . . . . . . . . 135
By car . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
By public transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
What to bear in mind when transporting your Scott pedelec . . . . . . . . . . 138
By car . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
By train / By public transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
By plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
GENERAL NOTES ON CARE AND SERVICING . . . . . . . . . . . . . . . . . . 140
Maintenance and servicing your Scott bike . . . . . . . . . . . . . . . . . . . . . 140
Cleaning and caring for your Scott bike or Scott pedelec . . . . . . . . . . . . 142
Sheltering and storing your Scott bike or Scott pedelec . . . . . . . . . . . . . 144
What to bear in mind when servicing Scott speed pedelecs . . . . . . . . . . 145
Maintenance and care of your Scott pedelec motor . . . . . . . . . . . . . . . . . . . 146
SCOTT SERVICE AND MAINTENANCE SCHEDULE . . . . . . . . . . . . . . . 148
RECOMMENDED TORQUE SETTINGS FOR YOUR SCOTT BIKE. . . . . . . 150
Recommended torque settings for disc brakes and
hydraulic rim brakes on your Scott bike. . . . . . . . . . . . . . . . . . . . . . . . 152
LEGAL REQUIREMENTS FOR RIDING ON PUBLIC ROADS . . . . . . . . . . 153
WARRANTY AND GUARANTEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Notes on wearing parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
SCOTT WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 10
b ca
SOME NOTES ON THE TRANSLATION OF THESE ORIGINAL
SCOTT OPERATING INSTRUCTIONS
The illustrations on the first pages of the translation of these original SCOTT
operating instructions show typical SCOTT city/trekking bikes and two typical
SCOTT pedelecs. One of these SCOTT bikes looks similar to the SCOTT bike
you have purchased. Today’s bikes come in various types that are designed for
specific uses and fitted accordingly. The translation of these original SCOTT
operating instructions includes the following bicycle types:
City bikes (a)
Trekking bikes (b)
Urban bikes
Fitness bikes
Kids’ bikes
Pedelec (c-f)
Speed pedelec
E-bike
EPAC
The translation of these original SCOTT operating instructions is not applicable
to any other than the displayed bicycle types. This manual is not intended to
help you assemble a SCOTT bike from individual components, to repair it or to
make a partly assembled SCOTT bike ready for use.
In the translation of these original SCOTT operating instructions pedelecs with
drive support and described as EPACs in the European standard EN 15194 are
referred to as pedelecs. For the different EPAC types, see the chapter “Intended
use of your SCOTT bike”.
In the translation of these original SCOTT operating instructions the term “bi-
cycle” will always be used in general descriptions if this refers to city/trekking
bikes and pedelecs.
ENGLISH 11 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Pay particular attention to the following symbols:
WARNING
This symbol indicates a hazardous situation which could result in death or
serious injury – if the relevant operational instructions are not followed or if
the relevant protective measures are not taken.
CAUTION
This symbol indicates a hazardous situation which could result in minor or
moderate injury – if the relevant operational instructions are not followed or
if the relevant protective measures are not taken.
NOTICE
This symbol is used to address practices not related to physical injury –
which may, however, result in damage to property and the environment.
SAFETY INSTRUCTIONS
This symbol indicates specific safety-related instructions or procedures
about how to handle the product or refers to a section in the operating
instructions that deserves your particular attention.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 12
b ca
The described possible consequences will not be repeated in this translation
of the original SCOTT operating instructions every time one of the symbols
appears.
The present translation of the original operating instructions complies with the
requirements of the EN ISO standard 4210-2 for city and trekking and young
adult bicycles, the EN ISO standard 8098 for bicycles for young children as well
as EN 15194 for pedelecs.
It is essential to also observe the manuals of the component manufacturers and
the system instructions of your drive manufacturer.
ENGLISH 13 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
SAFETY AND BEHAVIOUR
Dear SCOTT customer,
Congratulations on your purchase of a new SCOTT bike. We are confident that
the bike will exceed your expectations for quality, functioning and riding char-
acteristics. Our SCOTT frames and components are customized and adjusted to
suit the needs of the users to enhance your joy when riding on your new SCOTT
bike – whether you are a beginner or a non-professional road racer or not!
To ensure that you ride safely and with joy, we strongly encourage you to take
the time to read the translation of these original SCOTT operating instructions
thoroughly.
If you have purchased a SCOTT bike for your child (a), make sure he/she un-
derstands the information contained in this manual and can handle the new
SCOTT bike accordingly. Observe the chapter “SCOTT kids’ bikes” before your
child sets off for the first time. There are special traffic regulations for children
in some countries. Read the aforementioned chapter before your child uses the
bicycle for the first time.
In purchasing this SCOTT bike you have chosen a product of high quality and
technology. Each component of your new SCOTT bike has been designed,
manufactured and assembled with great care and expertise. Your SCOTT dealer
gave the bike its final assembly and made a functional check. This guarantees
you pleasure and a sense of confidence from the very first turn of the pedals
(b-d).
The translation of these original SCOTT operating instructions contains a wealth
of useful facts on the proper use of your SCOTT bike, its maintenance and op-
eration as well as interesting information on bike design and engineering. Read
the translation of these original SCOTT operating instructions thoroughly. We
are sure that even if you have been cycling for many years you will find it worth-
while. Bike technology has developed at a rapid pace during recent years (e+f).
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 14
b ca
Therefore, before setting off on your new SCOTT bike, you should read at least
the chapter “Tests before your first ride”. To ensure as much fun and safety as
possible during cycling, be sure to carry out the functional check described in
the chapter “Tests before every ride” before setting off on your SCOTT bike.
Even a manual as detailed as an encyclopaedia could not describe every pos-
sible combination of available bicycle models and components. The translation
of these original SCOTT operating instructions therefore focuses on your newly
purchased SCOTT bike or SCOTT pedelec and standard components and pro-
vides useful information and warnings for the handling of your new SCOTT bike.
When doing any adjusting and servicing (a), be aware that the detailed instruc-
tions provided in your manual only refer to this SCOTT bike.
The information included here is not applicable to any other bicycle type. As
bicycles come in a wide variety of designs with frequent model changes, the
routines described may require complementary information. It is essential to
also observe the manuals of the component manufacturers and the system
instructions of your drive manufacturer.
Be aware that these instructions may require further explanation, depending on
the experience and/or skills of the person doing the work. For some jobs you
may require additional (special) tools (b) or supplementary instructions. This
manual cannot teach you the skills of a bicycle mechanic.
SAFETY INSTRUCTIONS
For additional information on your bicycle and the web links for the com-
ponent manufacturers, please visit the manual pages of the bike brand you
have purchased via your Quick Start Manual.
ENGLISH 15 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Before you set off, let us point out a few things to you that are very important to
every cyclist: Never ride without a properly adjusted helmet and without glasses
(c). Make sure to wear suitable, bright clothing. As a minimum you should wear
straight cut trousers and or leg bands and shoes fitting the pedal system (d).
Always ride carefully on public roads and observe the traffic rules so as not to
endanger yourself or others.
This manual cannot teach you how to ride. Be aware that cycling is a potentially
dangerous activity that requires the rider to stay in control of his or her SCOTT
bike at all times. When setting off on a SCOTT pedelec, keep in mind that the
drive boosts your cycling speed. If necessary, attend a beginners course for
cyclists or pedelec riders, as already offered here and there.
Like any sport, cycling involves the risk of injury and damage. By choosing to ride
a bike, you assume the responsibility for the risk. Note that on a bike you have
no protection technique around you like you have in a car (e.g. bodywork, ABS,
airbag). Therefore, always ride carefully and respect the other traffic participants.
Never ride under the influence of drugs, medication, alcohol or when you are
tired. Do not ride with a second person on your SCOTT bike and never ride with-
out having both hands on the handlebars.
Observe the legal regulations concerning off-road cycling and public roads.
These regulations may differ in each country.
Respect nature when riding through the forest and in the open countryside. Only
use your bike on signposted, well maintained trails and hard-surface roads (e).
Always bear in mind that you travel rapidly and quietly when you are riding a
SCOTT pedelec. Do not startle pedestrians or other cyclists. Always make others
aware of your presence well ahead of time and by ringing your bell (f) or make
use of the brakes so as to avoid accidents. Familiarize yourself with your SCOTT
pedelec.
For more information in this regard, read the chapters “Riding a SCOTT pedelec”
and “Useful facts for riding a SCOTT speed pedelec“.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 16
ENGLISHENGLISH 05 |
| 04 TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2018ORIGINAL OPERATING INSTRUCTIONS 2018 | TREKKING AND TREKKING-PEDELEC
16
18
19
20
21
22
23
24
26
27
28
29
30
31
32
3
4
5
6
7
1
2
3
4
5
6
7
9
10
11
12
14
15
A
B
C
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
1
2
3
4
5
8
6
7
9
11
10
12
13
14
15
II
III
IV
1
2
4
5
6
7
I
16
18
19
20
21
22
23
24
26
27
28
29
30
31
32
1
2
3
4
5
6
7
9
10
11
12
14
15
II
III
I
1
2
4
5
6
7
IV
A
B
C
II
III
IV
I
1 Saddle
2 Seat post
3 Seat post clamp
4 Pannier rack
5 Rear light
6 Brake rear
7 Rotor
8 Front derailleur
9 Cassette sprockets
10 Rear derailleur
11 Kickstand
12 Chain
13 Chainring
14 Crank
15 Pedal
16 Stem
17 Bell
18 Handlebars
19 Brake lever
20 Shifter
21 Headset
22 Front lamp
23 Brake front
24 Rotor
25 Hub dynamo
Wheel:
26 Quick-release/
thru axle
27 Spoke
28 Rim
29 Reflector ring
30 Tyre
31 Hub
32 Valve
Frame:
1 Top tube
2 Down tube
3 Central tube
4 Seat tube
5 Chainstay
6 Seat stay
7 Head tube
Suspension fork:
I Fork crown
II Stanchion tube
III Lower leg
IV Drop-out
A Motor
B Rechargeable battery
C Display and command
console
ENGLISHENGLISH 05 |
| 04 TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2018ORIGINAL OPERATING INSTRUCTIONS 2018 | TREKKING AND TREKKING-PEDELEC
16
18
19
20
21
22
23
24
26
27
28
29
30
31
32
3
4
5
6
7
1
2
3
4
5
6
7
9
10
11
12
14
15
A
B
C
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
1
2
3
4
5
8
6
7
9
11
10
12
13
14
15
II
III
IV
1
2
4
5
6
7
I
16
18
19
20
21
22
23
24
26
27
28
29
30
31
32
1
2
3
4
5
6
7
9
10
11
12
14
15
II
III
I
1
2
4
5
6
7
IV
A
B
C
II
III
IV
I
1 Saddle
2 Seat post
3 Seat post clamp
4 Pannier rack
5 Rear light
6 Brake rear
7 Rotor
8 Front derailleur
9 Cassette sprockets
10 Rear derailleur
11 Kickstand
12 Chain
13 Chainring
14 Crank
15 Pedal
16 Stem
17 Bell
18 Handlebars
19 Brake lever
20 Shifter
21 Headset
22 Front lamp
23 Brake front
24 Rotor
25 Hub dynamo
Wheel:
26 Quick-release/
thru axle
27 Spoke
28 Rim
29 Reflector ring
30 Tyre
31 Hub
32 Valve
Frame:
1 Top tube
2 Down tube
3 Central tube
4 Seat tube
5 Chainstay
6 Seat stay
7 Head tube
Suspension fork:
I Fork crown
II Stanchion tube
III Lower leg
IV Drop-out
A Motor
B Rechargeable battery
C Display and command
console
ba
First, we would like to familiarize you with the various components of your
SCOTT bike. Unfold the cover of the translation of these original SCOTT operat-
ing instructions. There you will find a SCOTT city/trekking bike (a) and a SCOTT
pedelec (b) showing all the essential components. Leave the page unfolded as
you read so that you can easily locate the components as they are referred to in
the text.
WARNING
For your own safety, never do any work or adjusting when servicing your
bike unless you feel absolutely sure about it. If you are in doubt or if you
have any questions, contact your SCOTT dealer.
Note: Do not hitch yourself and your bike to a car. Do not ride freehand. Only
take your feet off the pedals, if required by the condition of the road.
SCOTT – NO SHORTCUTS
ENGLISH 17 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
dc
INTENDED USE OF YOUR SCOTT BIKE
Your SCOTT bike was designed by our engineers for a specific use. Be sure to
use your SCOTT bike only according to its intended use, as it may otherwise not
withstand the stress and fail causing an accident with unforeseeable consequences!
Any improper use will invalidate the warranty.
There is no bicycle type which is suitable for all purposes. Your SCOTT dealer will
be pleased to help you find the right SCOTT bike for you and your needs. He will
also show you the limits of the different types of bicycles.
SAFETY INSTRUCTIONS
Visit www.scott-sports.com and find out to which condition your new
SCOTT bike belongs or contact your SCOTT dealer.
You find more information on your SCOTT bike and the weblinks of the com-
ponent manufacturers via your Quick Start Manual on the respective pages
in the manual of the bicycle brand you have purchased.
Condition 1 SCOTT Bicycles
In general, SCOTT condition 1 bicycles (c+d) are used, for example, for commut-
ing and leisure rides under moderate exertion.
SCOTT condition 1 bicycles are intended for use on normal, paved surfaces, i.e.
asphalted or paved roads and cycle lanes, with the tyres designed to maintain
contact with the ground at average speeds. Steps or kerbs may only be ridden
carefully up to a maximum height of 15cm. The intended range of the average
speed is between 15 and 25kmh (9.3 and 15.5mph).
These bicycles are not suitable for off-road, cyclo-cross or mountain bike use or
jumps and competitive use of any kind whatsoever.
Before using condition 1
SCOTT
bicycles on public roads, they must be
equipped with the devices prescribed for this purpose (lighting system, bell).
Observe the traffic rules when riding on public roads. You find more information
in the chapter “Legal Requirements for Riding on Public Roads”.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 18
ba
You find details as to the maximum permissible overall weight on the sticker on
the frame of your SCOTT bike and in the chapter “Notes on the maximum per-
missible overall weight. Under certain circumstances the permissible maximum
weight can be further limited by the component manufacturers’ recommenda-
tions for use.
WARNING
SCOTT condition 1 bicycles (a+b) are not suitable for offroad use, jumps,
slides, stair riding, stoppies, wheelies, tricks, etc. and not for competitive use
of any kind whatsoever!
Trailers and child seats are only permitted if outlined on your weight card
which came with your SCOTT bicycle. Note that SCOTT will not assume lia-
bility or provide guarantee for the use of trailers and child seats because of
the wide variety of fastening systems for them, the technical specifications
for these systems and the problems associated with them. Contact your
SCOTT dealer before mounting.
Luggage carriers are only permitted if outlined on your weight card which
came with your SCOTT bicycle if the rear stays and the drop-outs of your
SCOTT bike have fastening devices for luggage carriers. In this case mount-
ing a suitable luggage carrier is permitted. Contact your SCOTT dealer
before mounting.
Always observe the maximum permissible overall weight of your bicycle
when adding a child seat/trailer/luggage carrier and observe the chapter
Notes on the maximum permissible overall weight”.
NOTICE
The use of Turbo/Smart Indoor Trainers is not permitted with SCOTT carbon
road bikes. If you wish to use such a device, you do so at your own risk and
SCOTT Sports SA accepts no risk or responsibility.
SAFETY INSTRUCTIONS
You find more information in the chapter “Notes on the transport of loads
and on carrying children and/or pets with your SCOTT bike”.
You find more information on your SCOTT bike and the weblinks of the com-
ponent manufacturers via your Quick Start Manual on the respective pages
in the manual of the bicycle brand you have purchased.
ENGLISH 19 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
edc
Condition 2 SCOTT Bicycles
In general, SCOTT condition 2 bicycles (c-e) are used, for example, for leisure
and trekking rides under moderate exertion.
SCOTT condition 2 bicycles are for use on normal, paved surfaces, i.e. asphalted
or paved roads and cycle lanes, as well as on unpaved roads and gravel paths
of moderate grading. Under these conditions there may be contact with une-
ven terrain and loss of tyre contact with the ground may occur. Steps or kerbs
(jumps/drops) may only be ridden carefully up to a maximum height of 15cm.
The intended range of the average speed is between 15 and 25kmh (9.3 and
15.5mph).
These bicycles are not suitable for off-road, cyclo-cross or mountain bike use or
jumps and competitive use of any kind whatsoever.
Before using SCOTT condition 2 bicycles on public roads, they must be
equipped with the devices prescribed for this purpose (lighting system, bell).
Observe the traffic rules when riding on public roads. You find more information
in the chapter “Legal Requirements for Riding on Public Roads”.
You find details as to the maximum permissible overall weight on the sticker on
the frame of your SCOTT bike and in the chapter “Notes on the maximum per-
missible overall weight. Under certain circumstances the permissible maximum
weight can be further limited by the component manufacturers’ recommenda-
tions for use.
WARNING
SCOTT condition 2 bicycles are not suitable for offroad use, jumps, slides,
stair riding, stoppies, wheelies, tricks, etc. and not for competitive use of any
kind whatsoever!
Trailers and child seats are only permitted if outlined on your weight card
which came with your SCOTT bicycle. Note that SCOTT will not assume lia-
bility or provide guarantee for the use of trailers and child seats because of
the wide variety of fastening systems for them, the technical specifications
for these systems and the problems associated with them.
Luggage carriers are permitted on SCOTT condition 2 bicycles, if the rear
stays and the drop-outs of your SCOTT bike have fastening devices for lug-
gage carriers. In this case mounting a suitable luggage carrier is permitted.
Contact your SCOTT dealer before mounting.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 20
b ca
WARNING
Always observe the maximum permissible overall weight of your bicycle
when adding a child seat/trailer/luggage carrier and observe the chapter
Notes on the maximum permissible overall weight”.
NOTICE
The use of Turbo/Smart Indoor Trainers is not permitted with SCOTT carbon
road bikes. If you wish to use such a device, you do so at your own risk and
SCOTT Sports SA accepts no risk or responsibility.
SAFETY INSTRUCTIONS
You find more information in the chapter “Notes on the transport of loads
and on carrying children and/or pets with your SCOTT bike”.
You find more information on your SCOTT bike and the weblinks of the com-
ponent manufacturers via your Quick Start Manual on the respective pages
in the manual of the bicycle brand you have purchased.
SCOTT kids’ bikes
In general, these are SCOTT kids’ bikes (a-c) with a wheel size from 12 to 26“.
SCOTT kids’ bikes are intended for use on normal, paved surfaces, i.e. asphalted
or paved pedestrian paths and cycle lanes, with the tyres designed to maintain
contact with the ground at average speeds. Steps or kerbs may only be ridden
carefully up to a maximum height of 15cm.
For further information check the condition outlined on your weight card which
came with your SCOTT kids’ bike and check the sticker on the bike to educate
yourself on what condition your kids‘ bicycle is covered by.
These bicycles are not suitable for competitive use of any kind whatsoever.
Before using SCOTT kids’ bikes on public roads, they must be equipped with the
devices prescribed for this purpose (lighting system, bell). Observe the traffic
rules on public roads and be a good example and teacher for your child. You find
more information in the chapter “Legal Requirements for Riding on
Public Roads”.
ENGLISH 21 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
You find details as to the maximum permissible overall weight on the sticker on
the frame of your SCOTT bike and in the chapter “Notes on the maximum per-
missible overall weight. Under certain circumstances the permissible maximum
weight can be further limited by the component manufacturers’ recommendations
for use.
WARNING
SCOTT kids’ bikes are not suitable for jumps, slides, stair riding, stoppies (d),
wheelies, tricks, etc., for rides with pannier bags and not for competitive use of
any kind whatsoever!
Walker Bikes are not allowed for any jumping or off road use.
Children should not ride near precipices, stairs or swimming pools and on
paths used by motor vehicles.
Some SCOTT kids’ bikes are suitable for mounting training wheels.
Trailers (e) and child seats (f) are not permitted on SCOTT kids’ bikes. Note
that SCOTT will not assume liability or provide guarantee for the use of trailers
and child seats.
SCOTT kids’ bikes with the appearance of a BMX bike must also only be used
in accordance with the intended use for bikes of this condition.
NOTICE
The use of Turbo/Smart Indoor Trainers is not permitted with SCOTT carbon
road bikes. If you wish to use such a device, you do so at your own risk and
SCOTT Sports SA accepts no risk or responsibility.
SAFETY INSTRUCTIONS
You find more information on your SCOTT bike and the weblinks of the com-
ponent manufacturers via your Quick Start Manual on the respective pages in
the manual of the bicycle brand you have purchased.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 22
12.70
28
APPROX WEIGHTS
IN KG
APPROX WEIGHTS
IN LBS
SCOTT-SPORTS .COM
ENGLISH – MAXIMUM PERMISSIBLE OVERALL WEIGHT 2021
This chart shows the maximum permissible overall weight for the 2021 model range. The permissible overall weight
is the total combined weight of the ri der, bike, luggage and any addit ional components fitted to the bike.
PLEASE READ, “INTENDED USE OF YOUR BIKE” CHAPTER IN THE GENERAL MANUAL
SCOTT MO DEL
Maximum
permissible
overall wei ght
in kg
Condition
Kid Seat
Tra il er
EU USA EU USA
MOUNTAIN
Scale RC 900 / Scale 900 / Scale 710 128 128 33
Spark RC 900 / Spark 900 128 128 33
Genius 128 128 44
Ransom 128 128 44
Gambler 128 128 55
Volt ag e 128 128 55
Aspect 128 128 33
ROAD
Addict RC / Addict / Addict disc 120 120 61
Foil 120 120 61
Addict Gravel 120 120 22
Plasma 120 120 61
Addict CX RC 120 120 22
Speedster disc / Spe edster 120 120 61
Spee dster Gravel 120 120 22
Metrix 120 120 11
WOMEN
Contessa Addict RC /
ContessaAddict disc 120 120 61
Contessa Speedster disc /
ContessaSpeedster 120 120 61
Contessa Addict Gravel 120 120 22
Contessa Spe edster Gravel 120 120 22
Contessa Scale 128 128 33
Contessa Spark RC / Contessa Spark 128 128 33
Contessa Genius 128 128 44
Contessa Ransom 128 128 44
Contessa Active 128 128 33
eRIDE
Silence eRIDE 30 130 130 12
Ransom eRIDE 128 128 44
Genius eRIDE 128 128 44
Strike eRIDE 128 128 33
Aspect eRI DE 128 128 33
Addict eRIDE 120 120 61
Contessa Genius eRIDE 128 128 44
Contessa Strike eRIDE 128 128 33
Contessa Active eRIDE 128 128 33
SCOTT MO DEL
Maximum
permissible
overall wei ght
in kg
Condition
Kid Seat
Tra il er
EU USA EU USA
eRIDE . . .
Contessa Addict eR IDE 120 120 61
Axis eRIDE Evo Speed 128 128 11
Axis eRIDE Evo / Axis eRI DE 128 128 33
Sub Spor t eRID E 128 130 22
Sub Tour eRIDE 128 130 22
Sub Active eRIDE /
SubActivee RIDEUSX rack 128 130 22
Sub Cross eRIDE 128 130 22
Roxter 26 disc 128 128 33
Roxter 26 50 50 33
URBAN
Sub Sport
128 128 22
Sub Comfort 128 128 22
Sub Cross 128 128 22
FUTURE PRO
Ransom 60 0 / Ransom 400 80 80 44
Scale RC 600 70 70 33
Scale RC 400 Pro / Scale RC 400 70 70 33
Scale RC 200 70 70 33
JUNIOR
Scale 26 disc 50 50 32.2
Scale 24 rigid / Scale 24 disc / Scale 24 50 50 32.2
Scale 20 rigid / Scale 20 50 50 22.2
Roxter 24 50 50 32.2
Roxter 20 50 50 22.2
Contessa 26 disc / Contess a 26 50 50 32.2
Contessa 24 rigid / Contessa 24 disc/
Contessa 24 50 50 32.2
Contessa 20 rigid / Contessa 20 50 50 22.2
Scale 16 50 50 12.2
Roxter 16 / Roxter 14 50 50 12.2
Contessa 16 / Contessa 14 50 50 12.2
Roxter Walker 50 50 12.2
Contessa Walker 50 50 12.2
Gravel 400 50 50 22.2
Kid Seat Al lowed / Trailer Allowed
Kid Seat N ot Allowed / Traile r Not Allowed
b ca
NOTES ON THE MAXIMUM PERMISSIBLE OVERALL WEIGHT
The maximum overall weight limit is calculated as follows:
Weight bicycle (kg)
+ Weight cyclist (kg)
+ Weight luggage (e.g. backpack, pannier bags)
+ Weight child seat, trailer including load, persons and/or pets
(kg), if approved
= maximum permissible overall weight (kg)
You find details as to the maximum permissible overall weight on the sticker on
the frame of your SCOTT bike (a).
You find details as to the weight of your SCOTT bike / SCOTT pedelec on our
website at www.scott-sports.coms with your model at “Specifications(b).
NOTICE
If a trailer is used, the overall weight of the trailer (trailer + load) is counted as
part of the overall weight of the bicycle and must be considered in the maxi-
mum permissible overall weight of the bicycle.
NOTES ON THE TRANSPORT OF LOADS AND ON CARRYING
CHILDREN AND/OR PETS WITH YOUR SCOTT BIKE
Permission for use of a trailer with your SCOTT bike
Children/pet/cargo trailers are only permitted for use with SCOTT bikes if out-
lined on the weight card which came with your bicycle.
Children/pet/cargo trailers are not permitted for use with:
SCOTT bikes with carbon frames or forks
• Full-suspension SCOTT bikes
Speed pedelecs
SCOTT Children’s and junior bikes
WARNING
Check your weight card (c).
ENGLISH 23 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Children’s tandem bike systems are not permitted on principal.
Only trailers with two side-by-side wheels are permitted (d). Single-track trailers
are not permitted for use with SCOTT bikes.
The trailer must be fixed to the left dropout only (e). Other mounting connec-
tions (seat post, luggage carrier, etc.) are not permitted.
Have your child/pet/cargo trailer mounted exclusively by your SCOTT dealer.
WARNING
Ask your SCOTT dealer for appropriate child/pet/cargo trailers.
Observe the maximum permissible gross weight of the child/pet/cargo trail-
er. You find this information on the trailer and/or in the accompanying user
manuals of the respective manufacturer. If you are in doubt, contact your
SCOTT dealer.
Observe the maximum permissible overall weight of your SCOTT bike.
Use a child/pet/cargo trailer only, if permitted by the national and regional
regulations in the country where you are travelling.Observe the national and
regional regulations on the use of child/pet/cargo trailers.
Always observe the maximum permissible overall weight of your bicycle
when adding a trailer and observe the chapter “Notes on the maximum per-
missible overall weight”.
The following points have to be observed when using a child/pet/cargo
trailer:
Never set off before having safely stowed the objects in the trailer, i.e. actively
secured with tightening straps (f). Cargo shifting may otherwise negatively
affect the centre of gravity and thus the riding behaviour.
Stow heavy objects as far down as possible and towards the centre of the
trailer. When distributing the loads make sure the trailer is loaded as evenly as
possible.
Uncontrolled movements of the child or pet can cause your SCOTT bike and/
or the trailer to tilt. Therefore, always buckle up your children and pets in the
trailer.
Do not overload your child/pet/cargo trailer. Overloading can result in break-
age of the frame, the fork or the components. Risk of accident and injury!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 24
b ca
If your trailer obstructs the lighting equipment of your SCOTT bike, you have
to mount the lighting equipment visibly to the trailer. Before riding in the dark,
provide the rear end of the trailer with a battery/accumulator-operated lamp
(a).
Equip your trailer with a high safety flag to be seen better by other road users.
Make sure your child always wears a helmet. Be a good example and remem-
ber to always wear a helmet (b) yourself.
Adjust the tyre pressure (c) to the additional weight. The maximum pressure
is indicated on the tyre side.
SAFETY INSTRUCTIONS
In Germany the following provisions apply: A trailer wider than 60cm or
obstructing the rear light of the bicycle must be equipped with a red rear
light at the rear on the left side. In addition, it must be equipped with two
white reflectors showing to the front and two red reflectors showing to the
rear and, if the trailer is wider than 1m, with one white front lamp. Direction
indicators on trailers are generally permitted
Make yourself familiar with the modified riding and braking behaviour of your
SCOTT bike with child/pet/cargo trailer in an area free of traffic.
Adjust your riding style especially in wet conditions to the modified riding
characteristics and braking response of your SCOTT bike.
Start by practising riding with an empty trailer in an area free of traffic. If you
feel secure practise riding with your child or pet or the additional load in an
area free of traffic.
Luggage and cargo or the weight of children or pets generally modify the
riding characteristics of your SCOTT bike and extend the stopping distance!
Therefore, practise riding and braking with your loaded SCOTT bike in a place
free of traffic. Ride particularly considerately and anticipate critical situations.
WARNING
Observe the maximum permissible speed limit of the child/pet/cargo trailer.
You find this information in the accompanying user manuals of the respec-
tive manufacturer.
ENGLISH 25 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
SCOTT-SPORTS .COM
ENGLISH – MAXIMUM PERMISSIBLE OVERALL WEIGHT 2021
This chart shows the maximum permissible overall weight for the 2021 model range. The permissible overall weight
is the total combined weight of the ri der, bike, luggage and any addit ional components fitted to the bike.
PLEASE READ, “INTENDED USE OF YOUR BIKE” CHAPTER IN THE GENERAL MANUAL
SCOTT MO DEL
Maximum
permissible
overall wei ght
in kg
Condition
Kid Seat
Tra il er
EU USA EU USA
MOUNTAIN
Scale RC 900 / Scale 900 / Scale 710 128 128 33
Spark RC 900 / Spark 900 128 128 33
Genius 128 128 44
Ransom 128 128 44
Gambler 128 128 55
Volt ag e 128 128 55
Aspect 128 128 33
ROAD
Addict RC / Addict / Addict disc 120 120 61
Foil 120 120 61
Addict Gravel 120 120 22
Plasma 120 120 61
Addict CX RC 120 120 22
Speedster disc / Spe edster 120 120 61
Spee dster Gravel 120 120 22
Metrix 120 120 11
WOMEN
Contessa Addict RC /
ContessaAddict disc 120 120 61
Contessa Speedster disc /
ContessaSpeedster 120 120 61
Contessa Addict Gravel 120 120 22
Contessa Spe edster Gravel 120 120 22
Contessa Scale 128 128 33
Contessa Spark RC / Contessa Spark 128 128 33
Contessa Genius 128 128 44
Contessa Ransom 128 128 44
Contessa Active 128 128 33
eRIDE
Silence eRIDE 30 130 130 12
Ransom eRIDE 128 128 44
Genius eRIDE 128 128 44
Strike eRIDE 128 128 33
Aspect eRI DE 128 128 33
Addict eRIDE 120 120 61
Contessa Genius eRIDE 128 128 44
Contessa Strike eRIDE 128 128 33
Contessa Active eRIDE 128 128 33
SCOTT MO DEL
Maximum
permissible
overall wei ght
in kg
Condition
Kid Seat
Tra il er
EU USA EU USA
eRIDE . . .
Contessa Addict eR IDE 120 120 61
Axis eRIDE Evo Speed 128 128 11
Axis eRIDE Evo / Axis eRI DE 128 128 33
Sub Spor t eRID E 128 130 22
Sub Tour eRIDE 128 130 22
Sub Active eRIDE /
SubActivee RIDEUSX rack 128 130 22
Sub Cross eRIDE 128 130 22
Roxter 26 disc 128 128 33
Roxter 26 50 50 33
URBAN
Sub Sport
128 128 22
Sub Comfort 128 128 22
Sub Cross 128 128 22
FUTURE PRO
Ransom 60 0 / Ransom 400 80 80 44
Scale RC 600 70 70 33
Scale RC 400 Pro / Scale RC 400 70 70 33
Scale RC 200 70 70 33
JUNIOR
Scale 26 disc 50 50 32.2
Scale 24 rigid / Scale 24 disc / Scale 24 50 50 32.2
Scale 20 rigid / Scale 20 50 50 22.2
Roxter 24 50 50 32.2
Roxter 20 50 50 22.2
Contessa 26 disc / Contess a 26 50 50 32.2
Contessa 24 rigid / Contessa 24 disc/
Contessa 24 50 50 32.2
Contessa 20 rigid / Contessa 20 50 50 22.2
Scale 16 50 50 12.2
Roxter 16 / Roxter 14 50 50 12.2
Contessa 16 / Contessa 14 50 50 12.2
Roxter Walker 50 50 12.2
Contessa Walker 50 50 12.2
Gravel 400 50 50 22.2
Kid Seat Al lowed / Trailer Allowed
Kid Seat N ot Allowed / Traile r Not Allowed
e fd
• Your SCOTT bike including trailer is longer and wider than your usual SCOTT
bike. In bike-parking facilities there is not always enough space provided for
bicycles with trailers. Make sure that you neither obstruct the road nor the
bike lane/footpath, e.g. for wheelchair users, when parking your SCOTT bike
with trailer.
Keep in mind that much payload also increases wear and tear. Therefore,
check the condition of the wearing parts regularly, at least observe the inter-
vals given in the chapter “SCOTT Service and Maintenance Schedule”. Under
adverse conditions, e.g. when you ride a lot in rainy and dirty conditions and
cover many metres in altitude and are travelling with a lot of loads, you have
to plan even clearly shorter intervals.
Permission for use of a child seat on your SCOTT bike
Child seats are only permitted for use with SCOTT bicycles if outlined on the
weight card (d) which came with your bicycle.
The use of child seats is not permitted on:
SCOTT bikes with carbon frames or forks
• Full-suspension SCOTT bikes (e)
Speed pedelecs (f)
SCOTT children’s and junior bikes
WARNING
Check your weight card.
Child seats mounted to the seatpost or the seat tube are not permitted.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 26
b ca
WARNING
Only use child seats which are mounted so that the child sits behind the rider
(a). Child seats mounted in front of the rider are not permitted (exception:
cargo bikes with specific children transport devices). Ask your SCOTT deal-
er for appropriate child seats.
Child seats mounted with a suitable adapter for luggage carriers are only
permitted, if the carrier complies with the specifications of ISO 11243 and has
a maximum payload of at least 27 kilos.
Always observe the maximum permissible overall weight of your bicycle
when adding a child seat and observe the chapter “Notes on the maximum
permissible overall weight”.
Have your child seat mounted exclusively by your SCOTT dealer.
Use a child seat only, if permitted by the national and regional regulations in
the country where you are travelling.
Observe the maximum permissible overall weight of your SCOTT bike.
Observe the maximum permissible gross weight of the child seat. You find
this information on the child seat and/or in the accompanying user manuals
of the respective manufacturer. If you are in doubt, contact your SCOTT
dealer.
Children weighing more than 15 kilos must not be transported in the child
seat. Observe the maximum permissible gross weight of the child seat.
SAFETY INSTRUCTIONS
Read and observe the national and regional regulations on the use of child
seats.
ENGLISH 27 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
ENGLISH
| 148 ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
SCOTT SERVICE PLAN
1st service – After 100 – 300 kilometres or
5 – 15 hours of use or after three months from date of purchase
Order no.: ...................................................................
Mileage: ...................................................................
o All necessary maintenance work carried out (see service and maintenance
schedule); replaced or repaired parts:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carried out on: Stamp and signature
of the SCOTT dealer:
2nd service After 2,000 kilometres or
100 hours of use or after one year
Order no.: ...................................................................
Mileage: ...................................................................
o All necessary maintenance work carried out (see service and maintenance
schedule); replaced or repaired parts:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carried out on: Stamp and signature
of the XXXXXXXX dealer:
e fd
The following points have to be observed when using a child seat:
Always put a fitting helmet on your child (b) and this already before you place
him/her in the child seat. Many accidents happen when the bicycle is station-
ary, e.g. when it tips over. Be a good example and remember to always wear a
helmet yourself.
Never set off before having buckled up your child in the child seat. Uncon-
trolled movements of the child can cause your SCOTT bike to tilt.
Do not overload your child seat. Overloading can result in breakage of the
frame, the fork or the components. Risk of accident and injury!
Cover the springs of your saddle to make sure that your child will not have the
fingers pinched.
Adjust the tyre pressure to the additional weight. The maximum pressure is
indicated on the tyre side (c).
Make yourself familiar with the modified riding and braking behaviour of your
SCOTT bike with child seat in an area free of traffic.
Adjust your riding style especially in wet conditions to the modified riding
characteristics and braking response (d) of your SCOTT bike.
Start by practising getting on the bike and riding with an empty child seat (e)
in an area free of traffic. If you feel secure practise riding with your child in an
area free of traffic.
The weight of your child generally modifies the riding characteristics of your
SCOTT bike and extends the stopping distance! Therefore, practise riding and
braking with your loaded SCOTT bike in a place free of traffic. Ride particular-
ly considerately and anticipate critical situations.
Keep in mind that much payload also increases wear and tear. Therefore,
check the condition of the wearing parts regularly, at least observe the inter-
vals given in the chapter “SCOTT Service and Maintenance Schedule”. Under
adverse conditions, e.g. when you ride a lot in rainy and dirty conditions and
with lots of additional loads or when you cover a lot of altitude metres, you
have to anticipate even clearly shorter intervals (f).
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 28
b ca
Pedelecs
Pedelecs (pedal electric cycles) or EPACs (Electrically Power Assisted Cycles)
are bicycles with an auxiliary motor that only switches on when you move the
pedals. When you stop pedalling, the motor switches off.
A driving licence is not required for riding a SCOTT pedelec (a), if the motor
assistance switches off automatically at a speed of 25 kmh. You do not need an
operating licence and need not insure the pedelec either.
All regulations that apply to SCOTT bikes, also apply to SCOTT pedelecs, i.e.
using cycle paths is not compulsory. Wearing a helmet is recommended (b), but
not compulsory.
Make sure you do not confuse your SCOTT pedelec with a “SCOTT speed
pedelec” (see “Speed pedelecs”).
There are now many types of bicycles among the electric bicycles belonging to
different conditions.
It is imperative that you read chapters “Intended use of your SCOTT bike” and
Test before your first ride”. There you will find detailed information on the use
of the bicycles of the respective condition.
Some SCOTT pedelecs have a pushing aid (c) which provides assistance during
pushing, even without pedalling, up to a speed of 6 kmh.
Your SCOTT pedelec is designed for a maximum permissible overall weight, in-
cluding rider, luggage and SCOTT pedelec.
ENGLISH 29 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Speed pedelecs
Speed pedelecs are bicycles with an auxiliary motor (d) which provides assis-
tance to the rider even beyond a speed of 25 kmh, as long as you continue ped-
alling. The pedal-assist stops at a speed of 45 kmh. Without pedalling a SCOTT
speed pedelec provides assistance to a maximum speed of 20 kmh.
SCOTT speed pedelecs are regarded as motor vehicles, have an operating
licence or EU type approval and are therefore subject to strict regulations relat-
ing to the replacement of components and to changes. Modifications without
approval/type approval result in an expiration of the operating licence, i.e. the
SCOTT pedelec must no longer be used on public roads.
Check in the country where you use your SCOTT speed pedelec whether you
require a moped licence or a driving licence for motor vehicles.
You can obtain a moped licence if you are aged 15 or over. Inform yourself at
your driving licence agency.
Inform yourself in the country where you use your SCOTT speed pedelec about
the regulations on the use of speed pedelecs on cycle lanes in built-up areas, on
lanes which are marked with a road sign allowing access for mopeds, on cycling
one-way streets in the opposite direction, even when they are allowed to bikes
and on the use of roads which are closed for motor vehicles, motor cycles and
mopeds.
Inform yourself in the country where you use your SCOTT speed pedelec
whether wearing a helmet (e) is compulsory. Also read the chapter “Useful facts
for riding a SCOTT speed pedelec”.
Most of the SCOTT speed pedelecs are designed for cycling exclusively on lanes
and roads with a smooth surface (f). Only use trails that are allowed for speed
pedelecs / e-bikes. Typical SCOTT speed pedelecs are generally not suitable for
off-road use. Using SCOTT speed pedelecs off-road can result in crashes with
unforeseeable consequences.
Your SCOTT speed pedelec is designed for a maximum permissible overall
weight, including rider, luggage and SCOTT speed pedelec.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 30
ENGLISH
| 154 ORIGINAL OPERATING INSTRUCTIONS 2018 | TREKKING AND TREKKING-PEDELEC
HANDOVER REPORT
Please fill in this handover report legibly and in BLOCK LETTERS.
DEALER
Company name:
Street:
ZIP code, City:
Phone: (optional)
Email: (optional)
CUSTOMER
Title: Mr. Ms. Full name:
Street:
ZIP code, City:
Phone: (optional)
Email: (optional)
PRODUCT
Product type:
Model:
Frame number:
Use according to: Category 0 2 3 4 5
Permissible
overall load: Bike, rider and luggage: Max. kg
Child seat permitted: No Yes
Pannier rack: No Yes Max. load kg
Trailer permitted: No Yes Max. trailer load kg
b ca
WARNING
Be sure to use your SCOTT bike only for its intended purpose, as it may oth-
erwise not withstand the stress and fail. Risk of falling!
Do not modify your SCOTT pedelec or SCOTT speed pedelec; this applies
in particular to the performance or the possibly assisted speed! A modified
pedelec or speed pedelec must no longer be used on public roads.
Do not modify or manipulate (tune”) your SCOTT pedelec or SCOTT speed
pedelec. Risk of accident! Modifications and manipulations will render the
warranty void and result in a loss of the private liability insurance cover. The
pedelecs or speed pedelecs are then possibly no longer approved for use on
public roads (scope of the Road Traffic Licensing Regulation) and on forest
trails.
For your own safety, do not overestimate your riding skills. Note that though
looking easy the tricks of a professional are hazardous to your life and limb.
Always protect yourself with suitable clothing.
Note that there are different types of pedelecs and e-bikes (a+b) which are
subject to different legal framework conditions. Check the class of your
SCOTT pedelec or SCOTT e-bike in the SCOTT handover report in the Quick
Start Manual (c). Keep the specific regulations in mind when riding on public
roads and through the landscape.
NOTICE
The regulations and rules for pedelecs and speed pedelecs are being revised
constantly. Read the daily press to keep you informed about current legisla-
tive changes.
It is essential to also observe the manuals of the component manufacturers
and the system instructions of your drive manufacturer.
It is essential to also observe the manuals of the component manufacturers
and the system instructions of your drive manufacturer.For more infor-
mation about the intended use of your SCOTT pedelec or SCOTT speed
pedelec as well as the maximum permissible overall weight (rider, SCOTT
pedelec and luggage) see the SCOTT handover report in the Quick Start
Manual and the chapter “Intended use of your SCOTT bike”.
ENGLISH 31 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
NOTICE
Keep the translation of these original SCOTT operating instructions for
future reference and hand it over to the respective user, in case you sell, lend
or pass on your SCOTT pedelec or SCOTT speed pedelec otherwise.
SAFETY INSTRUCTIONS
Before towing a trailer with your SCOTT bike read chapter “Notes on the
transport of loads and on carrying children and/or pets with your SCOTT
bike”.
Before mounting a child carrier or pannier rack, check whether your SCOTT
bike is permitted for child carriers ot pannier racks. You will find the respec-
tive information in the chapter “Intended use of your SCOTT bike” or in the
SCOTT handover report in the Quick Start Manual. Contact your SCOTT
dealer.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 32
b ca
TESTS BEFORE YOUR FIRST RIDE
1. If you want to use your bike on public roads, it has to comply with legal
requirements. These requirements may vary in each country. The fittings of
your SCOTT bike are, therefore, not necessarily complete (a).
Ask your SCOTT dealer concerning the laws and regulations applicable in
your country or in the country you intend to use your SCOTT bike. Have your
SCOTT bike equipped accordingly before using it on public roads.
For more information see the chapter “Legal requirements for riding on pub-
lic roads“.
2. Are you familiar with the brake system (b+c)? Have a look at the SCOTT
handover report in the Quick Start Manual and check whether the brake lever
of the front brake is on the side you are used to (right or left). If it is not, ask
your SCOTT dealer to switch the brake levers before you set off for the first
time.
Your new bike is equipped with modern brakes which may be far more pow-
erful than those you were used to so far. Be sure to first practise using the
brakes on a level, non-slip surface off public roads! Slowly approach higher
brake performances and speeds.
For more information see the chapter “Brakes” and the manuals of the com-
ponent manufacturers. For additional information on your bicycle and the web
links for the component manufacturers, please visit the manual pages of the
bike brand you have purchased via your Quick Start Manual.
ENGLISH 33 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
3. Are you familiar with the type and functioning of the gears (d)? Ask your
SCOTT dealer to explain you the gear system and make yourself familiar with
your new gears in an area free of traffic, if necessary.
For more information see chapter “Gears” and the manuals of the component
manufacturers. For additional information on your bicycle and the web links
for the component manufacturers, please visit the manual pages of the bike
brand you have purchased via your Quick Start Manual.
4. Are saddle and handlebars properly adjusted? The saddle should be set to
a height from which you can just reach the pedal in its lowest position with
your heel. The hips should remain horizontal. Check whether your toes reach
to the floor when you are sitting on the saddle (e) (exception: full suspension
SCOTT bikes). Your SCOTT dealer will be pleased to help you, if you are not
happy with your seating position.
For more information see the chapter “Adjusting the SCOTT bike to the rider”.
5. If your SCOTT bike is equipped with clipless or step-in pedals (f): Have you
ever tried cycling with the respective cycling shoes? First practise locking
one shoe onto a pedal and disengaging it while standing on the other leg.
Ask your SCOTT dealer to explain you the pedals and to adjust them to your
needs.
For more information see the chapter “Pedals and shoes” and the manuals of
the component manufacturers.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 34
b ca
6. If you purchased a SCOTT bike with suspension (a+b), you should ask your
SCOTT dealer to adjust the suspension settings to your needs. Improperly
adjusted suspension elements are liable to malfunction or damage. In any
case they will impair the performance of your bike as well as your safety and
joy whilst riding.
For more information see the chapters “Front suspension” and “Suspension
seat post” and the manuals of the component manufacturers.
WARNING
Be aware that the distance you need to stop your pedelec increases, when
you are riding with your hands on bar ends or on multi-position handlebars.
The brake levers are not always within easy reach.
Be sure to use your SCOTT bike only for its intended purpose, as it may oth-
erwise not withstand the stress and fail. Risk of falling!
Note that both braking effect and tyre grip can be reduced drastically in wet
conditions. Look well ahead when riding on wet roads and go well below the
speed you would ride at in dry conditions.
A lack of practice when using clipless pedals or too much spring tension in
the mechanism can lead to a very firm connection, from which you cannot
quickly step out! Risk of falling!
In case you had a crash with your SCOTT bike, perform at least the check
described in the chapters “Tests before every ride“ and “Tests after an
accident“. Only ride back very carefully on your SCOTT bike, if it passed the
tests without any problems. Do not accelerate or brake hard and do not ride
your bike out of the saddle. If you are in doubt, have yourself picked up by
car, instead of taking any risk. Back home you need to check your SCOTT
bike thoroughly once again. If you are in doubt or if you have any questions,
contact your SCOTT dealer!
ENGLISH 35 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
ed f
CAUTION
Make particularly sure there is enough space between your crotch and the
top tube (c) so that you do not hurt yourself, if you have to get off your bicy-
cle quickly.
NOTICE
We recommend that you take out a private liability insurance. Make sure that
coverage for bicycle damage is provided by your insurance. Contact your
insurance company or agency.
SAFETY INSTRUCTIONS
Before towing a trailer (d) with your SCOTT bike read chapter “Notes on the
transport of loads and on carrying children and/or pets with your SCOTT
bike”.
Before mounting a child carrier or pannier rack, check whether your SCOTT
bike is permitted for child carriers ot pannier racks. You will find the respec-
tive information in the chapter “Intended use of your SCOTT bike” or in the
SCOTT handover report in the Quick Start Manual. Contact your SCOTT
dealer.
Before mounting a child seat (e), have a look at the SCOTT handover report
in the Quick Start Manual and contact your SCOTT dealer.
ADDITIONAL INFORMATION “TESTS BEFORE YOUR FIRST RIDE”
WITH YOUR SCOTT PEDELEC
1. Have you ever ridden a pedelec? Note the particular riding characteristics of
this revolutionary hybrid drive concept. Set off for your first ride by selecting
the lowest level of drive assistance (f)! Slowly approach the potential of your
SCOTT pedelec in an area free of traffic.
For more information see the chapters “Riding a SCOTT pedelec” or ”Useful
facts for riding a SCOTT speed pedelec“ and the system instructions of your
drive manufacturer.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 36
b ca
2. The rechargeable battery of your SCOTT pedelec must be charged be-
fore you set off for the first time (a). Are you familiar with the handling and
mounting of the rechargeable battery? Before you set off for the first time,
check whether the battery is properly mounted, that it has engaged audibly
and that it is locked (b).
For more information see the system instructions of your drive manufacturer.
3. The functions of your SCOTT pedelec are operated with the buttons on the
control unit (c) or on the command console (d). Are you familiar with all func-
tions and displays? Check whether you know the functions of all buttons on
the control unit or on the command console.
For more information see the system instructions of your drive manufacturer.
4. If your SCOTT pedelec has a pushing aid, this device provides assistance
during pushing your SCOTT pedelec. Are you familiar with the pushing aid?
For more information see the system instructions of your drive manufacturer.
WARNING
Be sure to use your SCOTT pedelec only for its intended purpose, as it may
otherwise not withstand the stress and fail. Risk of falling!
When mounting your SCOTT pedelec, make sure not to step on the ped-
als until you sit in the saddle and grip the handlebars tightly, and that one
pedal is at the lowest position when you get on (e). The motor assistance
might switch on suddenly and result in an uncontrolled start of your SCOTT
pedelec. Risk of falling!
Pull the brake lever of the rear brake and stop pedalling. The pedelec will
stop. Emergency stop! To achieve the shortest possible stopping distance
brake with both brakes in a way that the pedelec slows down gradually (see
chapter “Brakes”).
ENGLISH 37 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WARNING
We recommend that you charge your battery only during the day and only
in dry rooms which have a smoke or a fire detector; but not in your bedroom.
Place the battery during the charging process on a big, non-inflammable
plate made of ceramics or glass! Unplug the battery once it has been charged
up.
Charge your battery only with the supplied charger. Do not use the charg-
er of any other manufacturer, not even when the connector of the charger
matches your rechargeable battery. The rechargeable battery can heat up,
catch fire or even explode!
Do not park your SCOTT pedelec in the blazing sun.
Be aware that the brakes of your SCOTT pedelec are always more effective
than the drive. If you face any problems with your drive (e.g. because it push-
es you forward in front of a bend), slow down your SCOTT pedelec carefully.
CAUTION
Remove the rechargeable battery or the display before doing any work on
your pedelec (e.g. servicing, repairs, assembly, maintenance, work on your
drive etc.) (f). Activating the drive systems unintentionally bears the risk of
injury!
The weight distribution on your SCOTT pedelec differs markedly from the
weight distribution on bikes without drive assistance. A SCOTT pedelec
is markedly heavier than a SCOTT bike without drive assistance. For this
reason parking, pushing, lifting and carrying the SCOTT pedelec is more dif-
ficult. Bear this in mind when loading your pedelec into a car and unloading
it or when mounting it on a bicycle carrier system.
NOTICE
Note that not all SCOTT pedelecs are fitted with kickstands. Therefore, when
parking your SCOTT pedelec, make sure it stands safe and secure and is not
at risk of toppling over or being knocked over. If your SCOTT pedelec top-
ples over, it can suffer from damage.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 38
b ca
SAFETY INSTRUCTIONS
Before towing a trailer with your SCOTT bike read chapter “Notes on the
transport of loads and on carrying children and/or pets with your SCOTT
bike”.
Before mounting a child carrier or pannier rack, check whether your SCOTT
bike is permitted for child carriers ot pannier racks. You will find the respec-
tive information in the chapter “Intended use of your SCOTT bike” or in the
SCOTT handover report in the Quick Start Manual. Contact your SCOTT
dealer.
Before mounting a child seat, have a look at the SCOTT handover report in
the Quick Start Manual and contact your SCOTT dealer.
TESTS BEFORE EVERY RIDE
Your SCOTT bike has undergone numerous tests during production and a final
check has been carried out by your SCOTT dealer. Nevertheless, be sure to
check the following points to exclude any malfunctioning that may be due to
the transport of your SCOTT bike or to changes a third person may have per-
formed on your SCOTT bike before delivery:
1. Are the quick-release levers (a) of the front and rear wheel properly closed
and the bolts of the seat post and other components accurately tightened?
For more information see the chapter “Using quick-releases” and the manuals
of the component manufacturers.
2. Are the tyres in good condition and do they have sufficient pressure (b)? The
minimum and maximum pressure (in bar or PSI) is indicated on the tyre side.
For more information see the chapter “Wheels and tyres” and the manuals of
the component manufacturers.
ENGLISH 39 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
3. Spin the wheels to check whether the rims are true. If you have disc brakes,
watch the gap between frame and rim or tyre and, if you have rim brakes,
between brake pad and rim (c). Untrue rims can be an indication of tyres with
ruptured sides or broken spokes.
For more information see the chapter “Wheels and tyres” and the manuals of
the component manufacturers.
4. Test the brakes in stationary by firmly pulling the brake levers towards the
handlebars (d). The brake pads of rim brakes must hit the rim evenly with
their entire surface without touching the tyre during braking, in open condi-
tion or in between.
You should not be able to pull the lever all the way to the handlebars. If your
bike has hydraulic brakes, check the hydraulic brake cables for oil or brake
fluid leaks! Check the thickness of the brake pads, as well.
With disc brakes you should have a stable pressure point at once. If you have
to actuate the brake lever more than once to get a positive braking response,
have the SCOTT bike checked by your SCOTT dealer immediately.
For more information see the chapter “Brakes” and the manuals of the compo-
nent manufacturers.
5. Let your SCOTT bike bounce on the ground from a small height (e). If there
is any rattling, check where it comes from. Check the bearings and bolted
connections, if necessary. Tighten them slightly, if necessary.
6. In case you have a SCOTT bike with suspension, press down on your SCOTT
bike and see whether the spring elements retract and extend as usual (f).
For more information see the chapters “Front suspension” and “Suspension
seat posts” and the manuals of the component manufacturers.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 40
b ca
7. If your bike has a kickstand, make sure it is fully raised (a) before you set off.
Risk of falling!
8. Do not forget to take a high quality D- (b) or chain lock with you on your ride.
The only way to effectively protect your SCOTT bike against theft is to lock it
to an immovable object.
9. If you want to ride on public roads, make sure your SCOTT bike is equipped
according to the applicable regulations of your country (c). Riding without
lights and reflectors in dark or dim conditions is very dangerous because
you will be seen too late or not at all by other road users. A set of lights that
corresponds to the regulations is a must on public roads. Turn on the lights as
soon as dusk sets in.
For more information see the chapter “Legal requirements for riding on pub-
lic roads“.
WARNING
Do not use your SCOTT bike, if it fails at one of these points! A defective
SCOTT bike can lead to serious accidents! If you are in doubt or if you have
any questions, contact your SCOTT dealer.
Improperly closed fastenings, e.g. quick-releases, can cause parts of your
SCOTT bike to come loose and result in serious accidents!
Be aware that the distance you need to stop your pedelec increases, when
you are riding with your hands on bar ends or on multi-position handlebars.
The brake levers are not always within easy reach.
During use your SCOTT bike is undergoing stress resulting from the surface
of the road and from the rider’s action. Due to these dynamic loads, the
different parts of your bike react with wear and fatigue. Check your SCOTT
bike regularly, i.e. according to the SCOTT service and maintenance sched-
ule, for wear marks, scratches, deformations, colour changes and any indi-
cation of cracking. Components which have reached the end of their service
life may break without previous warning. Let your SCOTT dealer maintain
and service your SCOTT bike regularly, i.e. according to the SCOTT service
and maintenance schedule. In cases of doubt it is always best to replace
components.
ENGLISH 41 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
ADDITIONAL INFORMATION “TESTS BEFORE EVERY RIDE” WITH
YOUR SCOTT PEDELEC
1. Are the connections of the rechargeable battery, the control unit or the com-
mand console and the drive (d) correctly plugged?
For more information see the system instructions of your drive manufacturer.
2. Is your battery fully charged? Remember to fully recharge the battery after
each longer ride (e.g. less than 50% charged). SCOTT uses modern lithi-
um-ion batteries. These have no memory effect. It does not matter, if your
SCOTT pedelec is left as it is for a short time (e.g. during a break) when less
than 50% charged (e). However, you should not wait until the battery is fully
discharged!
For more information see the system instructions of your drive manufacturer.
3. Do the display on the control unit (f) and the cycle computer on the han-
dlebars show all the values? Is there any error message or warning on the
display? Check the values are correct before every ride. Do not set off on
your SCOTT pedelec under any circumstances, if the control element shows a
warning.
For more information see the system instructions of your drive manufacturer.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 42
1
2
b ca
4. Is the battery tight in its holder and the lock properly locked up? Never set off
with a loose and unlocked battery.
For more information see the system instructions of your drive manufacturer.
5. Are the tyres in good condition and do they have sufficient pressure? Note
that a pedelec weighs more and that your usual tyre pressure may be insuffi-
cient. A higher pressure gives a better riding stability and reduces the risk of
a puncture. The minimum and maximum pressure (in bar or PSI) is indicated
on the tyre side.
For more information see the chapter “Wheels and tyres”.
WARNING
Do not use your SCOTT pedelec, if it fails at one of these points! A defective
SCOTT pedelec can lead to serious accidents! If you are in doubt or if you
have any questions, contact your SCOTT dealer.
USING QUICK-RELEASES
Most SCOTT bikes are fitted with quick-releases to ensure fast adjustments,
assembly and disassembly. Be sure to check whether all quick-releases are tight
before you set off on your SCOTT bike. Quick-releases should be handled with
greatest care, as they affect your safety directly.
Practise the proper use of quick-releases to avoid any accidents.
Quick-release retention mechanisms essentially consist of two operative ele-
ments (a):
1. The hand lever on one side of the hub which creates a clamping force via a
cam when you close it.
2. The tightening nut on the other side of the hub with which the preload on the
threaded rod (quick-release axle) is set.
ENGLISH 43 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
CAUTION
Do not touch the brake disc directly after having stopped, e.g. after a long
down-hill ride, you may burn your fingers! Always let the brake disc cool
down before opening the quick-release.
Safe fastening of a component with a quick-release
Open the quick-release. You should now be able to read “Open“ (b) on the lever.
Make sure the component to be fastened is in the accurate position.
For more information see the chapters “Adjusting the SCOTT bike to the rider
and “Wheels and tyres” and the manuals of the component manufacturers.
Move the lever back, as if to close it. Now you should be able to read ”Close“ on
the outside of the lever. When you start closing the lever you should feel virtu-
ally no resistance with your hand until the lever is at a right angle to the frame/
fork (c).
When continuing to close the lever the resistance you feel should increase signifi-
cantly and towards the end even more strength is required to close the lever. Use
the ball of your thumb while your fingers pull on an immovable part, such as the
fork (d) or a rear stay, but not on a brake disc or spoke, to push it in all the way.
In its end position, the lever should be at a right angle to the quick-release axle
(e), i.e. it should not stand out. The lever should lie close to the frame or the fork
so that it cannot be opened accidentally. Make sure, however, that the lever is
easy to handle for actual quick use.
To check whether the lever is securely locked apply pressure to the end of the
hand lever and try to turn it while it is closed (f). If you can turn the lever around,
open it and increase the preload. Screw the tightening nut on the opposite side
clockwise by half a turn. Close the quick-release lever and check it again for
tightness.
Finally lift the bike a few centimetres, so that the wheel no longer touches the
ground and hit the tyre from above. If it is properly fastened, the wheel will
remain firmly fixed in the drop-outs of the frame or fork without producing any
rattling.
If your seat post is equipped with a quick-release mechanism, check whether
the saddle is firmly fixed by trying to twist it relative to the frame (a, p. 44).
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 44
b ca
WARNING
Never ride your SCOTT bike without having checked first, whether the
wheels are securely fastened. With an insufficiently closed quick-release the
wheel can come loose, thus creating a serious risk of accident!
After wheel mounting test the brakes in stationary. You should reach the
pressure point of the brake before the brake lever reaches the handlebars.
In the case of hydraulic brakes pump them, if necessary, until you reach a
precise pressure point.
CAUTION
Make sure the levers of both wheel quick-releases are always on the side
opposite to the chain. This will help you to avoid mounting the front wheel
accidentally the wrong way round. In the case of SCOTT bikes with disc brakes
and quick-releases having a 5-mm-axle, it may be reasonable to mount both
quick-releases with the lever on the side of the chain drive. This helps you not
to come into contact with the hot brake disc and prevents you from having
your fingers burnt. If you are in doubt or if you have any questions, contact
your SCOTT dealer.
NOTICE
If your SCOTT bike is equipped with quick-releases, be sure to lock the frame
to an immovable object together with the wheels when you leave it outside.
Anti-theft protection!
To be on the safe side you can replace the quick-releases by special locks.
They can only be opened and closed with a special, coded key or an Allen key.
If you are in doubt or if you have any questions, contact your SCOTT dealer.
THRU AXLES ON THE SCOTT BIKE
There are a wide range of thru-axle systems available now. Some systems are
tightened with a quick release system and some may require special tools for
assembly/disassembly.
Please consult your SCOTT dealer in how to operate before your first ride.
ENGLISH 45 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
ADJUSTING THE SCOTT BIKE TO THE RIDER
Your body height and proportions are decisive for the frame size of your
SCOTT bike. Make particularly sure there is enough space between your
crotch and the top tube so that you do not hurt yourself, if you have to get off
your bike quickly (b).
By choosing a specific type of bicycle you roughly determine the posture you
will be riding in (c+d). However, some components of your SCOTT bike are
especially designed so that you can adjust them to your body proportions up to
a certain degree.
This includes the seat post, the handlebars and the stem as well as the brake
levers.
As all works require know-how, experience, suitable tools (e) and skills, you
should restrict yourself to adjusting your seating position. Contact your SCOTT
dealer, if you are not happy with your seating position or if you want something
changed. They will see to your wishes the next time you leave your SCOTT bike
at the workshop, e.g. for the first inspection.
After any adjustment/assembly work, be sure to make a short functional check
as described in the chapter “Tests before every ride” and do a test ride on your
SCOTT bike in an area free of traffic (f).
WARNING
If you have a very small frame, there may be the danger of your foot col-
liding with the front wheel. Therefore, make sure your cleats are properly
adjusted.
All tasks described in the following require the know-how of a mechanic and
appropriate tools. Make it a rule to tighten the bolted connections always
with greatest attention. Increase the torque values bit by bit and check the
fit of the component in between. Use a torque wrench and never exceed the
maximum torque values! You will find the prescribed values in the chapter
Recommended torque settings for your SCOTT bike”, directly on the com-
ponents and/or in the manuals of the component manufacturers.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 46
b ca
SAFETY INSTRUCTIONS
The seating position depends highly on how you want to use the SCOTT
bike. Ask your SCOTT dealer or your trainer for help. The advice given below
is suitable for typical SCOTT city, trekking and urban bikes.
If sitting on the saddle causes you trouble, e.g. because it numbs your
crotch, this may be due to the saddle. Your SCOTT dealer has a very wide
range of saddles available and will be pleased to advise you.
ADJUSTMENT OF THE SADDLE TO THE CORRECT HEIGHT
The correct saddle height depends on the length of your legs. When pedalling,
the ball of your foot should be positioned above the center of the pedal axle.
With your feet in this position you should not be able to stretch your legs com-
pletely straight at the lowest point (a), otherwise your pedalling will become
awkward.
Check the height of your saddle with flat-soled shoes. This is best done with
suitable cycling shoes.
Sit on the saddle and put your heel on the pedal at its lowest point. Your leg
should be fully stretched and your hips should remain horizontal.
To adjust the saddle height loosen the quick-release lever (see the chapter “Us-
ing quick-releases“) or the binder bolt of the seat post clamp at the top of the
seat tube (b).
The latter requires suitable tools, e.g. an Allen key, with which you turn the bolt
two to three turns anticlockwise. Now you can perform the vertical adjustment
of the seat post.
Be sure not to pull out the seat post too far. The mark on the seat post (max.,
min., stop or the like) should always remain within the seat tube (c). Always
grease the surface of an aluminium or titanium seat post that is inserted into a
seat tube made of aluminium, titanium or steel. Do not grease carbon seat posts
and/or carbon seat tubes in the clamping area! Use special carbon assembly
paste instead.
ENGLISH 47 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Align the saddle with the frame by using the saddle nose and the bottom
bracket or top tube as a reference point (d). Clamp the seat post tight again by
closing the quick-release, as described in chapter “Using quick-releases” or by
turning the seat post binder bolts clockwise in half turns or better in steps of 0.5
Nm increments starting at 3 Nm. You should not need much strength in your
hands to clamp the seat post sufficiently tight. Otherwise the seat post does not
match the frame.
Verify in between that the seat post is sufficiently tight by taking hold of the
saddle at both ends and then trying to rotate the seat post inside the seat tube
(e). If it does rotate, gently retighten the binder bolt of the seat post clamp by
half a turn or better by a quater turn or in steps of 0.5 Nm increments and do
the check again.
Does the leg stretch test now produce the correct result? Check by moving your
foot and pedal to the lowest point. When the ball of your foot is exactly above
the pedal center in the ideal pedaling position, your knee should be slightly
bent. If this is the case, the saddle height is adjusted to the correct height.
Check whether you can touch the ground safely while sitting on the saddle by
stretching your feet to the floor. If not, you should lower the saddle until you
can, at least to begin with.
WARNING
Never apply grease or oil into a seat tube of a frame made of carbon un-
less an alloy sleeve is inside the frame. If you mount a carbon seat post, do
not put any grease on it, even if the frame is made of metal. Once greased,
carbon components may never again ensure reliable clamping! Use special
carbon assembly paste instead (f).
Make sure not to overtighten the binder bolt of the seat post clamp. Other-
wise you may damage the seat post or the frame. Risk of accident!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 48
b ca
WARNING
Never ride your bike with the seat post drawn out beyond the limit, maxi-
mum, or stop mark! The seat post might break or cause severe damage to
the frame. Please make sure the seat post clamp is correctly orientated with
the seat post frame clamping slot in the seat tube of the frame. In the case
of frames with seat tubes that extend beyond the top of the frame’s top tube
the seat post should be inserted into the seat tube at least below the bottom
of the top tube and below the top of the rear stays! If seat post and frame
require different minimum insertion depths, you should opt for the deeper
insertion depth.
CAUTION
Tighten carefully by approaching the prescribed maximum torque value in
small steps (0.5 Nm increments) and check in between the proper fit of the
component (a). Never exceed the maximum torque value indicated by the
manufacturer!
Children and adolescents need to have the saddle height and the position of
saddle and handlebars checked at least every 3 months!
SAFETY INSTRUCTIONS
If the seat post does not move easily inside the seat tube or if it cannot be
tightened sufficiently, ask your SCOTT dealer for advice. Do not use brute
force!
If your SCOTT bike has a suspension seat post (b), you will find further in-
formation in the chapter “Suspension seat posts” and in the manuals of the
component manufacturers.
ENGLISH 49 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
ADJUSTMENT OF THE HEIGHT OF THE HANDLEBARS
The height of the handlebars compared to the saddle and the distance between
saddle and handlebars determine how much your upper body will be inclined
forward. Lowering the handlebars gives you a streamlined position and brings
more weight to bear on the front wheel. However, it also entails an extremely
forward leaning posture which is tiring and less comfortable, because it increas-
es the strain on your wrists, arms, back, upper body and neck.
There are three different stem systems that allow vertical adjustment of the
handlebars, the conventional (c), the adjustable (d) and the Aheadset®-stem
(e). These systems require special knowledge. In this regard, the descriptions
hereafter may be incomplete. If you are in doubt or if you have any questions,
contact your SCOTT dealer.
WARNING
The stem is one of the load bearing parts of your SCOTT bike. Changes to
it can impair your safety. If you are in doubt or if you have any questions,
contact your SCOTT dealer!
These routines require a certain amount of manual skill and (special) tools.
Ask your SCOTT dealer to explain you both function and adjustment of your
stem or let him do that work.
The bolted connections of stem and handlebars have to be tightened to the
prescribed torque values. If you disregard the prescribed values, the han-
dlebars or stem may come loose or break. Use a torque wrench and never
exceed the maximum torque values! You will find the prescribed values in
the chapter “Recommended torque settings for your SCOTT bike”, directly
on the components and/or in the manuals of the component manufacturers.
Stems come in varying lengths (f) as well as shaft and binder tube diame-
ters. A stem of inappropriate dimension can become a source of danger:
Handlebars, stems or forks can break, resulting in an accident. When replac-
ing any parts be sure to only use parts that bear the appropriate mark and,
to be on the safe side, original spare parts from SCOTT or SYNCROS. Your
SCOTT dealer will be pleased to help you.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 50
b ca
WARNING
If you choose to use the product of another manufacturer, make sure it is
compatible with the SCOTT/SYNCROS components. SCOTT assumes no
responsibility for problems resulting from the use of non-SCOTT/SYNCROS
products. Make sure the handlebar/stem-combination is approved by the
handlebar and/or stem manufacturer.
Make sure the handlebar clamping area is free of sharp edges.
Stems - conventional
Handlebars with conventional stems allow limited vertical adjustment. This is
done by moving the stem up or down inside the fork steerer tube (a).
Release the expander bolt by two to three complete turns. The stem should
now turn freely inside the fork. If it does not, release the bolt by tapping it gently
with a rubber hammer (b). With Allen bolts, you need to stick the Allen key into
its head first, as it is normally countersunk and therefore impossible to be hit
directly.
Now you can move the handlebar/stem-unit up and down as a whole. Be sure
not to pull out the stem too far. The mark on the stem (end, min, max, stop, limit
or the like) should always remain within the tube. Setting the stem to a lower
position can only add to your safety!
Realign the handlebars with the front wheel (c). Make sure the front wheel is in
alignment with the handlebars and the stem. Retighten the expander bolt with a
torque wrench.
Tighten carefully by approaching the prescribed maximum torque value in small
steps (0.5 Nm increments) and check in between the proper fit of the compo-
nent. Never exceed the maximum torque value indicated by the manufacturer!
You will find the prescribed values in the chapter “Recommended torque set-
tings for your SCOTT bike”, directly on the components and/or in the manuals
of the component manufacturers.
ENGLISH 51 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Make sure the stem is firmly fixed by taking the front wheel between your legs
and trying to turn the handlebars and stem relative to the wheel (d). If there is
movement, you have to increase the torque value. Do not exceed the maximum
torque value.
If the handlebars are still too high or too low, you can replace the stem. This can
be quite a big job, as it may mean taking off and remounting all the fittings on
the handlebars. Ask your SCOTT dealer for advice about the different types of
stems.
WARNING
Never ride a SCOTT bike with a stem that has been drawn out beyond the
mark for the maximum permissible height (a)! Check all bolted connections
and test your brakes before you set off!
NOTICE
Never try to unscrew the top race of the headset when you only want to
adjust the stem, as you will otherwise alter the bearing play!
Stems - adjustable
There are various solutions for adjusting the tilt of the front part of adjustable
stems (e):
Some designs use bolts on the sides of the joint (f), others have bolts coming
from above or below, and others again are equipped with additional locking
mechanisms or adjusting bolts.
Ask your SCOTT dealer to explain you both function and adjustment of your
stem or, still better, let him do that work.
For more information see the chapter “Adjustment of the height of the handle-
bars” and the manuals of the component manufacturers.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 52
b ca
WARNING
Note that the bolted connections of adjustable stems and handlebars have
to be tightened to the specified torques. Otherwise the handlebars or stem
may come loose or break. Use a torque wrench and observe the minimum
and maximum torque values! You will find the prescribed values in the chap-
ter “Recommended torque settings for your SCOTT bike”, directly on the
components and/or in the manuals of the component manufacturers.
SAFETY INSTRUCTIONS
Keep in mind that readjusting the position of the stem changes the position
of handlebars, brake levers and shifters. Readjust these components, as
described in the chapter “Adjustment of handlebar tilt and brake levers“.
Stems for threadless systems – Aheadset®
In the case of SCOTT bikes with Aheadset® headsets the stem also serves to
adjust the bearing preload. If you change the position of the stem, you have to
readjust the bearing play (see the chapter “The headset on the SCOTT bike” and
the manuals of the component manufacturers).
The vertical setting range is determined by the intermediate rings, also referred
to as spacers (a). In the case of flip-flop stem models (b) the stem can be
mounted the other way round to achieve a different handlebar height.
For modifications unscrew the bolt at the top of the fork steerer tube which
serves to adjust the initial bearing pressure, remove the Ahead cap (c) and re-
lease the bolts on either side of the stem by up to three turns. Remove stem and
spacers from the fork steerer tube. In doing so keep hold of both frame and fork
to prevent the fork from slipping off the head tube.
You can determine the handlebar height by the arrangement of stem and spac-
ers. Slip the remaining spacers onto the fork steerer tube above the stem. Ad-
just the headset, as described in the chapter “The headset on the SCOTT bike“.
ENGLISH 53 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
If you want to turn the stem around, you have to also release the bolts of the
faceplate securing the handlebars (d). If the stem is fitted with a cap, you can
simply take out the handlebars at this point. If it is not fitted with a cap, you have
to remove the handlebar fittings.
Mount the handlebars and, if necessary, the handlebar fittings, as described in
the chapter “Adjustment of handlebar tilt and brake levers” and/or in the manu-
als of the component manufacturers.
Check after the adjustment or assembly, whether the handlebars are firmly seat-
ed in the stem by trying to rotate the handlebars downwards (e). Verify whether
the handlebar/stem-combination can be turned relative to the fork. Do this by
taking the front wheel between your knees and trying to twist the handlebars.
If there is movement, carefully tighten the bolts a little more by using the torque
wrench, observe the maximum torque value and check again the proper fit (f).
Tighten carefully by approaching the prescribed maximum torque value in small
steps (0.5 Nm increments) and check in between the proper fit of the compo-
nent. Never exceed the maximum torque value indicated by Scott!
Ask your SCOTT dealer to explain you both function and adjustment of your
stem or, still better, let him do that work.
WARNING
In the case of turned stems, it is possible that the cables are too short. In this
case riding can be unsafe. If in doubt, ask your SCOTT dealer.
NOTICE
When removing spacers the fork steerer tube must be shortened. This
change is irreversible. The shortening should be carried out by your SCOTT
dealer, but only after you have found your preferred position.
SAFETY INSTRUCTIONS
Keep in mind that readjusting the position of the stem changes the position
of handlebars, brake levers and shifters. Readjust these components, as
described in the chapter “Adjustment of handlebar tilt and brake levers“.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 54
b ca
Saddle adjustment – fore-to-aft position and horizontal tilt
The inclination of your upper body (a), and hence your riding comfort and
pedalling power, are also influenced by the distance between the grips of the
handlebars and the saddle. This distance can be altered slightly by changing the
position of the saddle rails in the seat post clamp. However, this also influences
your pedaling. Whether the saddle is positioned more to the front or to the back
of the bike will alter how rearward the pedalling position of your legs is.
Make sure the saddle is clamped within the range of the marking on the saddle
rail, i.e. on the straight part of the rail, never in the curved sections.
You need to have the saddle horizontal in order to pedal in a relaxed manner.
If it is tilted, you will constantly have to lean against the handlebars to prevent
yourself from slipping off the saddle.
WARNING
The bolted connections of the seat post have to be tightened to the pre-
scribed torque values (b). Use a torque wrench and never exceed the
maximum torque values! You will find the prescribed values in the chapter
Recommended torque settings for your SCOTT bike”, directly on the com-
ponents and/or in the manuals of the component manufacturers.
Make sure the saddle is clamped within the range of the marking on the
saddle rail and not in the curved section of the saddle rails (c). Otherwise the
saddle rail can fail! Check the bolts by using a torque wrench once a month
according to the prescribed values.
SAFETY INSTRUCTIONS
The setting range of the saddle is very small. Replacing the stem allows you
to make far bigger adjustments to the rider’s fore-to-aft position, as stems
come in different lengths. In doing so you may achieve differences of more
than ten centimetres. In this case you usually would have to adjust the length
of the cables – a job best left to your SCOTT dealer!
The manufacturers of saddles deliver their products with detailed manuals.
Read them carefully before adjusting the position of your saddle. If you are
in doubt or if you have any questions, contact your dealer.
ENGLISH 55 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Adjustment of saddle position and tilt
With patent seat posts (d) one or two bolts fix the clamping mechanism, which
controls the tilt and the horizontal position of the saddle. Some seat posts have
two bolts side-by-side.
Release the bolt(s) at the top of the seat post. Release the bolt(s) two to three
turns anticlockwise at the most, otherwise the whole assembly can come apart.
Move the saddle forth or back, as desired. You may have to give the saddle a
light blow to make it move.
Observe the markings on the saddle rail. Make sure the seat of the saddle re-
mains horizontal (e) as you retighten the bolt(s). Your SCOTT bike should stand
on level ground while you adjust the saddle.
Having found your preferred position, make sure both clamp halves fit snugly
around the saddle rails before tightening the bolt(s) to the correct torque value
as prescribed by the seat post manufacturer.
Retighten the bolt(s) with a torque wrench according to the manuals of the
manufacturer. After fastening the saddle, check whether it resists tilting by
bringing your weight to bear on it once with your hands at either end of the
saddle (f).
WARNING
Poorly tightened or loosening bolts can fail. Risk of accident!
Check the bolts by using a torque wrench once a month according to the
values indicated directly on the components and/or in the manuals of the
component manufacturers.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 56
b ca
Clamping with two bolts in line (a): Release both bolts two to three turns
anticlockwise, otherwise the whole assembly can come apart. Move the saddle
forward or backward as desired to adjust the horizontal position. You may have
to give the saddle a light blow to make it move. Observe the markings on the
saddle rail.
Having found your preferred position, make sure both clamp halves fit snugly
around the saddle rails before tightening the bolt(s) to the correct torque value
as prescribed by the seat post manufacturer.
Tighten both bolts evenly (b) so the saddle remains at the same angle. If you
wish to lower the nose of the saddle a little, tighten the front bolt clockwise. You
might have to loosen the rear bolt a little as well. To lower the rear part of the
saddle, the rear bolt has to be tightened clockwise and the front bolt has to be
released, if necessary. After fastening the saddle, check whether it resists tilting
by bringing your weight to bear on it once with your hands at either end of the
saddle (c).
WARNING
Check the bolts by using a torque wrench once a month according to the
values indicated directly on the components and/or in the manuals of the
component manufacturers.
Poorly tightened or loosening bolts can fail. Risk of accident!
If you have a single bolt system (d), unscrew the fixing bolt as far as possible
without loosening the lock nut on the outer side of the clamping device (e).
In general, it is not necessary to take the mechanism completely apart, if it is
already equipped with the correct outer clamps for your saddle.
If you do find it necessary to unscrew the single fixing bolt completely, remove
it from the clamping device. This releases the outer clamping parts. The inner
clamping parts are typically held in position with a rubber retention plate.
ENGLISH 57 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Mount the saddle rails into the inner clamping parts, add the outer parts and
re-insert the fixing bolt. If the width of the saddle rails does not fit exactly into
the clamp grooves, do not try to force them in. The clamping mechanism or the
saddle rails could break and result in an accident and/or injuries to the rider.
Use a different saddle model (f) or contact your SCOTT dealer.
SAFETY INSTRUCTIONS
When choosing another saddle, observe that there are round and ovalized
rails. Replace the fitting pieces of the clamp accordingly.
If the saddle rails fit into the clamp grooves, slide the saddle on the seat post
and ensure that the clamp is positioned midway along the total length of the
rails. Position the saddle so that its upper surface is parallel to the ground. Tight-
en the bolt gradually and make sure
1) the clamping device is still accurately mounted on the carbon seat post head
and
2) the clamp is tightening evenly around each rail.
Once there is uniform hold on both rails, tighten the bolt gradually with a torque
wrench until you have reached the maximum torque value indicated in Newton
metres (Nm) on the seat post.
WARNING
Check the bolts by using a torque wrench once a month according to the
values indicated directly on the components and/or in the manuals of the
component manufacturers.
Poorly tightened or loosening bolts can fail. Risk of accident!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 58
b ca
COCKPIT ADJUSTMENT
Brake lever reach adjustment on SCOTT city, trekking, urban and kids
bikes
With most brake systems the distance between the brake levers and the han-
dlebar grips is adjustable. This gives in particular riders with small hands (a) the
convenience of bringing the brake levers closer to the handlebars.
On most bikes there is a small adjusting screw near the point where the brake
cable of a cable brake enters the brake lever unit or at the lever itself. Turn this
bolt clockwise and watch how the lever adjusts as you do so. Note that the
brake lever has a free travel of one third before the pressure point of the brake is
reached.
Hydraulic brakes are also fitted with adjusting devices at the brake lever (b).
There are different systems (A+B). Ask your SCOTT dealer for advice or read
the manuals of the component manufacturers.
When adjusting the lever reach, make sure the first phalanx of the index finger
reaches around the brake lever (c). Check the proper adjustment and function-
ing of the brake system subsequently, as described in the chapter “Brakes” and
in the manuals of the component manufacturers.
WARNING
Make sure your child cannot pull the brake levers all the way to the handle-
bars. Your maximum braking force must be reached short of this point.
SAFETY INSTRUCTIONS
In the case of hydraulic brakes and disc brakes follow the manual of the
brake manufacturer. If you are in doubt or if you have any questions, contact
your SCOTT dealer.
ENGLISH 59 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
1
2
4
3
e fd
Adjustment of handlebar tilt and brake levers on SCOTT city, trekking,
urban and kids’ bikes
The handlebars are usually slightly bent at the ends. Set the handlebars to a
position in which your wrists are relaxed and not turned outwards too much (d).
Release the Allen bolt(s) at the bottom or front side of the stem.
Turn the handlebars to the desired position.
Make sure the handlebars are accurately centreed in the stem. Carefully retight-
en the bolt(s) with the torque wrench. Make sure the upper and lower clamping
slots of the stem are parallel and identical in width (e).
Tighten the bolts evenly and in a cross pattern (f), i.e. alternately and gradually,
to the lower value of the recommended torque values using a torque wrench.
Once clamped in the stem try rotating the handlebars and tighten the bolt a
little more, if necessary. Use a torque wrench and never exceed the maximum
torque values! You find them directly on the components and/or in the manuals
of the component manufacturers. If the handlebars are not tight with the pre-
scribed torque value, use carbon assembly paste.
After adjusting the handlebars you need to adjust the brake lever/shifter units.
Release the Allen bolt at either unit. Turn the levers relative to the handlebars.
Sit in the saddle and place your fingers on the brake levers.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 60
b ca
Check whether the back of your hand forms a straight line with the line of your
forearm (a). Retighten the units with a torque wrench and do a twist test! The
brake levers need not be absolutely tight. In case of a fall it is an advantage
when the brake levers can be turned.
WARNING
Tighten the bolts at the stem until the clamping slots between the stem
body and the faceplate are parallel and identical in width at the top and at
the bottom. Tighten the bolts evenly and in a cross pattern, i.e. alternately
and gradually, to the lower value of the recommended torque values using a
torque wrench.
Note that the bolted connections of the stem, handlebars, bar ends and
brakes have to be turned to their prescribed torque values. Use a torque
wrench and never exceed the maximum torque values! You will find the
prescribed values in the chapter “Recommended torque settings for your
SCOTT bike, directly on the components and/or in the manuals of the com-
ponent manufacturers.
Bar ends
Bar ends (b) and multi-position handlebars give you additional ways of gripping
the handlebars.
The bar ends are mounted with a slight upward inclination. Never fix bar ends in
vertical position or with their ends pointing rearwards as this would increase the
risk of injury in the event of an accident.
WARNING
Be aware that the distance you need to stop your pedelec increases, when
you are riding with your hands on bar ends or on multi-position handlebars.
The brake levers are not always within easy reach.
SAFETY INSTRUCTIONS
If you want to mount multi-position handlebars or bar ends to the alumin-
ium or carbon handlebars of your SCOTT bike, inform yourself in advance
whether these components are permitted on your SCOTT bike. If necessary,
contact your SCOTT dealer before mounting.
ENGLISH 61 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
SUSPENSION ON SCOTT BIKES
GLOSSARY
Suspension fork (c)
Bicycle fork absorbing and damping shocks through moving components. The
most common among these forks are the telescopic suspension forks (d). What
is designated as stanchion tubes are the thinner tubes press fitted or screwed
to the fork crown of a telescopic fork. What is designated as lower leg are the
lower tubes in which the stanchion tubes slide in.
Spring rate or hardness
The force that is required to compress the spring by a certain suspension travel
– measured in Newton per millimetre (N/mm) or pound per inch (lbs/in). A
higher spring rate requires more force for the travel. With air springs a higher
rate means a higher pressure (e).
Spring preload
In the case of the widespread air suspension systems, the air pressure in the fork
is crucial for the spring rate and the spring preload. Observe your manufactur-
er’s recommendations.
Within a certain range a preload can be applied to the coil springs. Then the
suspension only reacts when a greater load is applied. The spring rate remains,
however, unaltered. Heavier riders cannot compensate a too soft spring rate
with a higher initial tension.
Negative suspension travel (sag”) (f)
The suspension travel that is taken up by the rear structure or the fork when the
rider takes up his or her usual riding position at a standstill. This is usually speci-
fied as a percentage of the overall suspension travel.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 62
b ca
Rebound damping
In most cases a red adjusting knob (a).
The damping which controls the rate at which the forks extend after being com-
pressed. Prevents bike bobbing.
Lockout (b)
In most cases a lever on the suspension element or the handlebars.
A device to block the fork so that the suspension element does not cause bob
when riding on tarred roads or smooth surfaces. Not to be used off road.
FRONT SUSPENSION
Most of the SCOTT city, trekking bikes and SCOTT pedelecs have suspension
forks. This feature gives you better control of your SCOTT bike when riding
cross-country or on rough road surfaces and ensures more ground contact for
the tyre. It noticeably reduces the strain on you and your bicycle caused by the
mechanical shocks from the terrain.
Suspension forks differ in their types of spring elements and damping. Suspen-
sion forks normally work with air spring elements or less often with coil springs.
Damping is usually done by oil.
SAFETY INSTRUCTIONS
Suspension fork manufacturers normally include instructions with their
deliveries. Read them carefully before changing any settings or doing any
maintenance work on your suspension fork.
For more information see the suspension glossary heading this chapter.
Adjusting the spring rate
To work perfectly, the suspension fork has to be adjusted to the weight of the
rider, the sitting posture and the intended use. Be sure to have this adjustment
carried out by your SCOTT dealer at the time of delivery.
ENGLISH 63 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Note in general that the suspension fork must give in a little even when you
are just sitting on the bike (c) – this is the so-called negative suspension travel
or sag. When the front wheel passes through a depression in the ground, the
spring extends and the suspension fork will smooth out the uneven surface. If
the air pressure or the spring preload is too high, this effect is lost because the
suspension fork is already fully extended. This means that an important comfort
and safety factor is lost if the tyre briefly loses contact with the ground.
The suspension fork should yield by 10-20 % of the maximum suspension travel.
To measure the travel you can use the rubber ring (d) mainly located on the
thinner, plunging tube of the suspension fork. If there is no rubber ring, tie up
a cable tie around one of the stanchion tubes. Make sure it is not too tight, you
should still be able to move it, it should however not slip by itself.
Put on your usual riding clothing (including if necessary a packed rucksack),
sit on your bike and bring yourself into the usual riding position. Lean against a
fixed object (railings, wall etc.) and make sure you do not fall over. Ask a helper
to move the rubber ring or the cable tie downwards against the dust seal at the
lower leg.
Get off your SCOTT bike so that the fork does not compress any more. The dis-
tance between the rubber ring/cable tie and the wiper is the negative suspen-
sion travel, or sag (e). Compare it with the total suspension travel (as specified
by the manufacturer) to determine whether the suspension should be set to be
harder or softer.
With pneumatic suspension forks the spring rate is set by the air pressure in
the fork. The pressure must be set before the first ride by means of a special
high-pressure pump with pressure gauge (f) and modified later as required due
to changes in the weight of the rider and/or load.
Note the appropriate setting values and check them subsequently at regular
intervals. Always follow the recommendations of the manufacturer and never
exceed the maximum air pressure for the suspension fork. Always make a test
ride after each change to the settings.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 64
b ca
In the case of most suspension forks with coil springs a preload can be applied
to the springs within tight limits by turning a knob at the top of the fork crown
(a). If that is not possible and the desired negative suspension travel (“sag)
cannot be set, the coil springs must be replaced by harder or softer models. The
replacement is a job for the SCOTT dealer.
When replacing any parts, be sure to only use parts that bear the appropriate
mark and, to be on the safe side, original spare parts. Your SCOTT dealer will be
pleased to help you.
Always make a test ride over roads with various surfaces after each change to
the settings (b).
Check afterwards the position of the rubber ring/cable tie. Its distance from the
wiper is the maximum suspension travel that you have used (c). If the rubber
o-ring/cable tie has moved a few millimetres only, your rear shock is too firm.
Reduce the air pressure of air sprung forks or the initial spring tension of coil
springs. If that brings no improvement, have the springs replaced.
If the rubber ring/cable tie has shifted over the entire length of the tube or if
the fork audibly bottoms out and hits the top repeatedly when riding on bad
roads, the setting of the springs is too soft. In the case of air-suspension forks
the pressure must be increased. In the case of steel coils, have them replaced by
your SCOTT dealer.
WARNING
Suspension forks are designed in a way to absorb shocks. If the fork is too
rigid and jammed, the terrain-induced shocks pass directly into the frame
without any damping. The frame is normally not designed to withstand such
undamped stresses. If your suspension has a lockout mechanism, do not ac-
tivate the lockout function when riding in rough terrain, but only when riding
over smooth terrain (roads) and on field tracks.
The suspension fork should be set up and adjusted in a way that it does not
reach the end of its travel, i.e. bottom out, unless in extreme cases. A spring
rate which is too soft (air pressure is too low) can usually be heard or felt as
a “clunk” type noise. This noise is caused by the sudden complete compres-
sion of the suspension fork as it reaches bottom out. If the suspension fork
frequently reaches bottom out, it will fail over time, and so will the frame.
ENGLISH 65 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
SAFETY INSTRUCTIONS
In case of inquiries, contact your SCOTT dealer or follow the respective
instructions in the manual of the suspension fork manufacturer.
If you have found the desired setting, write down the ideal inflation pressure
for later checks.
Adjusting the damping control
The damping is adjusted by valves inside. When the oil is forced through these
valves this slows down the speed with which the suspension fork is extended or
compressed and prevents the suspension “bouncing” after hitting an obstacle.
In this way it is possible to optimise the bicycle’s reaction to obstacles.
Suspension forks with adjustable rebound damping have an adjusting knob
(mostly red) (d) to slow down or accelerate the rebound movement. If a second
(mostly blue) knob is available, the compression speed can be set and/or the
lockout function can be activated.
Start the adjusting with a completely open damping (rebound movement at “-“).
Take hold of the handlebars with both hands and pull the front brake. Lean with
your entire weight on the fork and remove your weight immediately (e). The
fork will extract at the same speed as you made it compress.
Turn the red adjusting knob in the direction ”+ (f) until you hear a click. Com-
press the fork once again with the front wheel brake pulled and then remove the
weight abruptly once again. You will note that the fork extends more slowly.
Repeat the compression and the release by continuously turning the rebound
damping. You will get a feeling for the working of the rebound damping.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 66
b ca
The typical setting of the rebound damping is an extension of the suspension
components at reduced speed, however not at a sluggish pace. A rebound
movement at reduced speed ending up in a sluggish movement is definitely a
too high damping.
Ride over an obstacle (e.g. down a kerb) subsequently and turn the rebound
damping in small steps towards the “+”-setting. You have found the proper re-
bound setting when the suspension fork does not cycle more than once. Always
check a modified adjustment during a test ride on the surface of a road typically
used by you.
If you do not trust the setting of the damping or if problems occur with it, con-
tact your SCOTT dealer or follow the corresponding instructions in the manual
of the suspension fork manufacturer.
WARNING
A too strong damping (rebound damping) of the fork can result in the fact
that the fork no longer extends when riding over a quick series of obstacles.
Risk of falling!
Do not turn any screws by using tools in the vague hope of adjusting them
somehow. You could be loosening the fastening mechanism, thus provoking
an accident. Normally, the adjustment devices are operated with the fingers
and are marked by all manufacturers with a scale or with “+” (for stronger
damping/harder suspension) and “-“ signs.
When mounting a new front tyre, make sure there is enough clearance
between tyre and fork crown as the fork compresses entirely. If necessary,
deflate the suspension fork completely and press the handlebars forcefully
downward to check this. The front wheel can get jammed. Risk of falling!
Do not ride your bicycle, if the suspension fork bottoms out. This could dam-
age the suspension fork itself as well as the frame. The spring rate should
always be adjusted to the weight of the rider and the luggage (a) as well as
to the riding conditions.
SAFETY INSTRUCTIONS
In case of inquiries, contact your SCOTT dealer or follow the respective
instructions in the manual of the suspension fork manufacturer.
ENGLISH 67 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Lockout
When taking long uphill rides involving hard pedalling out of the saddle, a sus-
pension fork is typically bobbing. It is advisable to lock the damping, if the sus-
pension fork has a lockout mechanism (b). For downhill rides on uneven ground
the lockout mechanism must be open stringently (c).
WARNING
Do not actuate the lockout function when riding over field tracks, but only
when riding over smooth terrain (such as roads or field tracks) (d).
Maintenance
Suspension forks are components of sophisticated design that require regular
maintenance and care. This has led almost all suspension fork manufacturers
to establish service centres where you can have your forks thoroughly checked
and overhauled at regular intervals according to use, e.g. once a year.
The following routines are essential for maintenance:
1. Make sure the sliding surfaces of the stanchion tubes and the wiper rings are
absolutely clean.
2. Clean the suspension fork, if it is soiled, directly after the ride with plenty of
water and a soft sponge (e).
3. After washing your bike, spray the stanchion tubes of the suspension fork
with a little grease spray (f) approved by the manufacturer or apply a very
thin film of hydraulic oil. Compress the fork several times and wipe off excess
lubricant with a clean rag before you set off for your next ride.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 68
b ca
4. Do not use a steam jet or aggressive cleaning agents for cleaning! Ask your
SCOTT dealer for an appropriate cleaning agent (a).
5. If your suspension fork has steel coils, you should regularly have the coils
cleaned (b) and lubricated with a non-corrosive resin-free grease. Some fork
manufacturers provide special greases for fork maintenance. Strictly observe
the recommendations of the manufacturers. These are routines for the sus-
pension fork service centre.
6. Suspension forks with pneumatic springs must be checked regularly for air
pressure (c), since the air escapes over time.
Suspension elements are of sophisticated design. The maintenance routines and
above all the disassembly of the suspension elements are jobs best left to your
SCOTT dealer or the fork manufacturer’s service centre.
WARNING
Suspension forks are constantly being sprayed with water and dirt from the
front wheel. Clean them with lots of water and a rag after every ride.
SAFETY INSTRUCTIONS
Be sure to have your rear shock checked by a service centre of the rear
shock manufacturer once a year at least.
More information on adjusting and maintenance is available on the internet at
www.srsuntour-cycling.com
www.foxracingshox.de
www.rockshox.com
Contact your authorized SCOTT dealer for assistance.
ENGLISH 69 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
SUSPENSION SEAT POSTS
Suspension seat posts (d) enhance the cyclist’s comfort when riding on rough
ground. They can be used on roads and field tracks. The seat posts are usually
designed for a cyclist of average weight, i.e. 75 kilograms. Their shock-absorb-
ing properties can be modified either by adjusting the spring preload and/or by
replacing the springs. Typically, for this purpose the seat post must be removed
from the frame. The adjustment is made by a bolt which is screwed into the seat
post at its lower end. Ask your SCOTT dealer to explain you the basic setting.
WARNING
Be sure not to pull out the seat post too far. The mark on the seat post (e)
(end, min, max, stop, limit etc.) should always remain within the seat tube.
SAFETY INSTRUCTIONS
Seat post manufacturers normally include instructions with their deliveries.
Read them carefully before changing any settings or doing any maintenance
work on your suspension seat post.
Check and maintenance
Hold the saddle at the back and front and tug it crossways to the direction of
travel (f). Check in this way if the suspension mechanism of the seat post has
any sideways play. If you notice any play, have it checked and, if necessary, re-
duced by your SCOTT dealer.
SAFETY INSTRUCTIONS
Have the seat post checked once a year by your SCOTT dealer.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 70
b ca
BRAKES
Brakes (a) are used for adjusting one’s speed to the surrounding terrain and
traffic. In an emergency situation, the brakes must bring your SCOTT bike to a
halt as quickly as possible.
In the event of such emergency brakings, the rider’s weight shifts forward
abruptly, thus reducing the load on the rear wheel. The rate of deceleration is
primarily limited by the danger of the rear wheel losing contact with the ground
(b), resulting in an overturning of the SCOTT bike and, secondly, by the grip of
the tyres on the road. Such a problem becomes particularly acute when riding
downhill. Therefore, in case of an emergency braking you should try to shift
your weight towards the rear and the ground as far as possible.
Actuate both brakes simultaneously (c) and bear in mind that, due to the weight
transfer, the front brakes can generate a far better braking effect on a surface
with good grip.
The braking conditions on unpaved surfaces and when it is wet or dirty differ,
i.e. overbraking the front wheel can make the wheel slip away.
Make yourself familiar with the operation before you set off for the first time.
Practise braking on different kinds of surfaces in an area free of traffic.
Wet weather reduces the braking power. Actuate the brakes carefully when
riding on wet or slippery ground, as the tyres can easily slip away. Therefore,
reduce your speed when riding in such conditions.
There are various types of brake systems that may be subject to the following
problems:
Too long braking or brake dragging can result in an overheating of the rim brakes
(d). This can damage the inner tube or make the tyre slip on the rim causing a
sudden loss of air which could lead to a serious accident in the process.
With roller, drum, back-pedal (e) and disc brakes prolonged braking or per-
manent dragging of brake pads can also lead to an overheating of the brake
system. This can result in a reduction of the braking power or brake failure. Risk
of accident!
ENGLISH 71 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
When riding downhill, get used to braking hard and then releasing the brake
again, whenever the road surface and the situation allows for it. If you are in
doubt about the braking action, stop and let the brake system cool down.
WARNING
The assignment of brake lever to brake caliper can vary, e.g. left lever acts
on front brake. Have a look at the SCOTT handover report in the Quick Start
Manual and check whether the brake lever of the front brake is on the side
you are used to (right or left). If it is not, ask your SCOTT dealer to switch the
brake levers before you set off for the first time.
Be careful while getting used to the brakes. Practise emergency stops in a
place clear of traffic until you are comfortable controlling your SCOTT bike.
This can save you from having accidents in road traffic.
Wet weather reduces the braking effect and the road grip of the tyres. Be
aware of longer stopping distances when riding in the rain, reduce your
speed and actuate the brakes carefully.
Ensure that braking surfaces and brake pads are absolutely free of wax,
grease and oil. Risk of accident!
SAFETY INSTRUCTIONS
When replacing any parts be sure to only use parts that bear the appropri-
ate mark and, to be on the safe side, original spare parts (f). Your SCOTT
dealer will be pleased to help you.
Be sure to read the manuals of the brake manufacturers before you start to
readjust or to service the brake or before doing any work whatsoever.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 72
b ca
RIM BRAKES
V-Brakes and cantilever brakes
Operation and wear
V-brake (a) and cantilever brake designs (b) have two brake arms mounted
separately on either side of the rim. When actuating the brake lever, both arms
are pressed together by the cable, the pads touching the rim.
The friction generated by braking causes wear to the brake pads as well as to
the rims. Frequent rides in the rain and dirt and on uneven ground can acceler-
ate wear on both braking surfaces. Some rims are provided with wear indica-
tors, e.g. grooves or circular indentations. If the rim is worn down to the point
where the grooves or indentations are no longer visible, they need to be re-
placed. Once the abrasion of the rim has reached a certain critical point, the rim
may break under the tyre pressure. This can make the wheel jam or the inner
tube burst, both of which can cause an accident. Risk of falling!
Functional check
Check whether the brake pads are accurately aligned with the rims and still
sufficiently thick. You can judge the wear of the brake pads by the appearance
of grooves.
If the pads are worn down to the bottom of the grooves (c), it is time to replace
them. Be sure to observe the appropriate instructions of the respective manu-
facturer.
See your SCOTT dealer and ask them to examine the remaining thickness of the
rims when you have worn through your second set of brake pads at the latest.
Your SCOTT dealer has special measuring devices for determining the remain-
ing thickness of the rims.
The brake pads must hit the rim simultaneously, first touching it with the front
portion of their surface. At the moment of first contact the rear portion of the
pads should be a millimetre away from the braking surface. Viewed from the top
the brake pads form a “V“ with the trough pointing to the front (d). This setting
is to prevent the brake pads from screeching when applied.
ENGLISH 73 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
The brake levers must always remain clear of the handlebars. You should not
even be able to pull them all the way to the handlebars in the event of an emer-
gency stop. If this is the case, however, observe the following chapter “Synchro-
nising and readjusting”. A correctly adjusted brake is only ensured if all of these
checks have been made successfully.
WARNING
Brake cables which are damaged, e.g. frayed (e), must be replaced imme-
diately, as they can otherwise fail in a critical moment, possibly causing a
crash!
Adjusting the position of the brake pads relative to the rims requires a
considerable degree of skill. Replacing and adjusting the brake pads is a job
best left to your SCOTT dealer.
Have your rims regularly inspected and measured by your SCOTT dealer.
Synchronising and readjusting
Almost all brake designs have a bolt located next to one or both brake callipers
for adjusting the initial spring tension (f). Turn the bolt slowly and watch how
the gap changes between brake pads and rim.
Adjust the spring in a way that the gaps are equal on either side with an unap-
plied brake and the brake pads touch the rim simultaneously during braking.
The position of the brake lever where the brake starts to act, also referred to as
pressure point, can be adjusted to the size of the hand as well as to individual
convenience by readjusting the brake cable. Make absolutely sure you cannot
pull the brake lever all the way to the handlebar grip. With an unapplied brake
the brake pads should not be too close to the rim sides, otherwise they could
drag along the rim during riding. Before making this adjustment, observe the
notes in the chapter “Brake lever reach adjustment.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 74
b ca
To readjust the brakes, unscrew the knurled lock ring located at the point where
the brake cable enters the brake lever on the handlebars (a). Unscrew the
knurled, slotted adjusting bolt by a few turns. This reduces the free travel of the
brake lever. Keeping the adjusting bolt firm, tighten the lock ring against the
brake lever unit. This prevents the adjusting bolt from coming loose by itself.
Ensure that the slot of the bolt faces neither forward nor upward, as this would
permit water or dirt to enter more easily.
WARNING
Always test the brakes’ function when stationary after adjusting them and
make sure the brake pads engage fully with the rim without touching the
tyre, when you pull them hard.
DISC BRAKES
Operation and wear
The most striking feature of disc brakes (b) is their outstanding braking effect.
They respond a lot faster in wet conditions than rim brakes do and achieve their
normal high braking power within a very short time. They require little mainte-
nance and do not wear down the rims as rim brakes do. Disc brakes consist of
the brake calliper (c), the rotor, the brake lines (hydraulic) or cables (mechan-
ical) as well as the brake lever unit. Actuating the brake lever compresses the
hydraulic pistons through hydraulic pressure or mechanically, pushing the brake
pads against the rotor.
The friction generated by braking causes wear to the brake pads as well as to
the rotors. Frequent rides in the rain and dirt and on uneven ground can accel-
erate wear on both braking surfaces. Depending on the manufacturer and the
model there are different ways of checking the brake pads and rotors for their
wear limits.
ENGLISH 75 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
ed
WARNING
New brake pads have to be bedded in before they reach their optimal
braking performance. Accelerate your SCOTT bike about 30 to 50 times to
around 30 kmh and bring it to a halt each time. This procedure is finished,
when the force required at the lever for braking has stopped decreasing.
Dirty brake pads and rotors can lead to drastically reduced braking power.
Therefore, make sure the brake remains free of oil and other fluids, especial-
ly when you clean your SCOTT bike or grease the chain (d). Dirty brake pads
can under no circumstances be cleaned, they must be replaced! Rotors can
be cleaned with special brake cleaners or with warm water and mild soap.
Unusual noises (scratching, chafing etc.) during braking and/or a noticea-
ble change of the braking force (stronger or weaker) are indications that
the brake pads are soiled or worn down. Check the brake pads and replace
them, if necessary (e). Otherwise you risk further damage, e.g. to the rotor,
or even an accident due to brake failure! If you are in doubt, contact your
SCOTT dealer.
CAUTION
Disc brakes get hot in use. For this reason do not touch the brakes directly
after stopping, especially after a long downhill ride.
NOTICE
If your SCOTT bike has disc brakes, be sure to mount the safety locks before
transporting your bike with the wheels dismounted.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 76
b ca
Hydraulic disc brakes
Functional check
Regularly check the lines and connections for leaks while pulling on the lever
(a).
Contact your SCOTT dealer immediately in the event of a brake liquid leakage.
A leak in the brake lines can render the brake ineffective. Risk of accident!
Wear and maintenance
Hydraulic disc brakes have a mechanism which automatically compensate for
the worn down brake pads. The brake lever travel does not change.
Check the pads (b) for wear at regular intervals by following the manuals of the
respective manufacturer.
WARNING
Loose connections and leaky brake lines drastically impair braking power.
If you find leaks in the brake system or buckled lines, contact your SCOTT
dealer immediately!
Do not transport your SCOTT bike with saddle and handlebars upside down
– risk of brake failure. Never turn it upside down for repair works.
A heavily clogged brake can lead to squeaking noises during braking.
Only transport your SCOTT bike with wheels mounted or if dismounted with
safety locks. Pull the brake lever and secure it with a strong elastic strap,
when transporting your SCOTT bike with hydraulic disc brakes. This will pre-
vent air from entering the system.
Do not open the brake lines. Brake fluid that can be very unhealthy and
damaging to the paint could leak out and render the brake ineffective.
SAFETY INSTRUCTIONS
If your brake system works with DOT brake fluid, the latter needs to be re-
placed regularly according to the intervals prescribed by the manufacturer.
Read in any case the manual of the brake manufacturer carefully before re-
moving the wheel or doing any maintenance work. Improper operation can
lead to brake failure.
ENGLISH 77 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Mechanical disc brakes
Functional check
The more brake pads of mechanical disc brakes wear down, the longer is the
brake lever travel. Regularly check whether you get a positive braking response
before the lever touches the handlebars (c). Make sure the brake cables are in
sound condition!
WARNING
Damaged cables (d) should be replaced immediately, as they can snap. Risk
of accident!
Wear and maintenance
To a certain extent, wear of the brake pads can be compensated directly at the
brake lever. Unscrew the knurled lock nut on the bolt through which the cable
enters the grip (e) and then unscrew the bolt until the lever has the desired trav-
el. Retighten the lock nut by taking care that the slot of the bolt does not face
upward or forward, as this would permit an unnecessarily high amount of water
or dirt to enter.
After readjusting check the functioning and make sure the brake pads do not
drag when releasing the brake lever and spinning the wheel.
Repeated readjustment at the brake lever makes the arm on the brake calliper
change its position. This can reduce braking power and result in a complete
brake failure in an extreme case. Risk of accident!
Some models offer further ways of adjusting the brakes directly at the brake
calliper (f), though this requires a certain amount of skill. Read the instructions
of the brake manufacturer carefully before adjusting the brake. If you are in
doubt or if you have any questions, contact your SCOTT dealer.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 78
b ca
WARNING
Repeated readjustment at the brake cable can drastically reduce the maxi-
mum braking performance.
SAFETY INSTRUCTIONS
Read in any case the manual of the brake manufacturer carefully before re-
moving the wheel or doing any maintenance work. Improper operation can
lead to brake failure.
ROLLER, DRUM AND BACK-PEDAL BRAKES
These types of brakes have an enclosed design; brake pads and surfaces inside
the hub body are largely protected against the influences of the weather. The
braking force is transmitted through cables from the levers to the brakes. As
rear brakes they are mostly connected to an internal gear hub (a) and some-
times they are operated by back pedalling.
With back-pedal brakes maximum braking force is achieved by stepping on one
of the pedals in its rearmost position with the cranks horizontal (b). With internal
gear hubs from SRAM braking power is increased when having shifted to a
lower gear.
The risk of overheating is particularly high with these brake systems. Brake
overheating occurs on prolonged (steep) downhill rides with permanent brake
dragging. Brake fading is a result thereof which, in extreme cases, can lead to
brake failure.
Therefore, if you notice that the braking effect deteriorates, stop and let the
brake system cool down. Sometimes, it will be enough to operate the front and
rear brake in an alternating pattern. If that will not suffice, stop for a couple of
minutes before you set off again (c).
ENGLISH 79 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WARNING
Brake cables which are damaged, e.g. frayed, must be replaced immediately,
as they can otherwise fail in a critical moment, possibly causing a crash!
If during braking the travel of the brake lever increases, unusual noises occur
and/or the braking effect is more or less effective than usual, do not ride
your bicycle. In such a case contact your SCOTT dealer immediately.
Check regularly whether the torque support (d) is firmly attached to the
frame or fork. Use a torque wrench and never exceed the maximum torque
values!
Checking and readjusting back-pedal brakes
The chain tension (e) of bicycles with back-pedal brakes has to be checked and
retensioned, if necessary, after approx. 1,000 km or 50 hours of use. For more
details read the chapter “Bicycle chain.
WARNING
Keep in mind that the back-pedal brake is ineffective with a fallen-off chain
(f). Risk of falling!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 80
b ca
GEARS
DERAILLEUR GEARS
The gears of your SCOTT bike (a+b) serve to adjust the gear ratio to the terrain
you are riding on and the desired speed.
A low gear (where in the case of derailleur gears the chain runs on the small
chainring and a large sprocket) allows you to climb steep hills with moderate
pedalling force. You must, however, pedal at a faster pace. High gears (large
chainring, small sprocket) are for riding downhill. Every turn of the pedals takes
you many metres forward at correspondingly high speed.
WARNING
Continue pedalling at reduced cadence during gear shifting, however, at
clearly reduced pedalling force. In particular when shifting through the
chainrings continue pedalling slowly and without force.
With SCOTT pedelecs reduce the cadence and the pedalling force shortly
before you start shifting. In doing so there is a short interruption of the drive.
If you continue pedalling, the high chain forces could result in a chain failure.
Practise switching gears in a place free of traffic until you are familiar with
the functioning of the levers or twist grips of your SCOTT bike.
SAFETY INSTRUCTIONS
SCOTT pedelecs have only one chainring. As a consequence there is no front
derailleur and no shifter on the left handlebars.
Read the gear manufacturer’s manual carefully and practise shifting gears
until you are familiar with it before you set off for the first time.
ENGLISH 81 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Operation and control
Derailleur gears always work according to the following principle:
Large front chainring – high/heavy gear – higher gear ratio
Small front chainring – low/easy gear – lower gear ratio
Large rear sprocket – low/easy gear – lower gear ratio
Small rear sprocket – high/heavy gear – higher gear ratio
Normally, the shifters are mounted as follows:
Shift lever right – rear sprockets
Shift lever left – front chainrings
Modern SCOTT city/trekking bikes can have up to 30 gears. As there are, how-
ever, overlapping ranges, actually 15 to 18 gears are usable. It is not advisable to
use gears which involve an extremely oblique run of the chain, as this reduces
power transmission efficiency and hastens wear of the chain.
An unfavourable run of the chain is when the smallest chainring is used with
one of the two or three outermost (smallest) sprockets (c) or when the largest
chainring is used with one of the inmost (largest) sprockets (d).
The bottom bracket (e) is the interface between cranks and frame. There are
different designs, in some cases the bearing spindle is part of the bottom
bracket, in some other cases it is integrated into the right crank. Sealed bottom
brackets are maintenance free and delivered without play ex works. The bottom
bracket in the frame must be checked for play at regular intervals.
Also check at regular intervals whether the cranks are firmly attached to the
bearing spindle or whether there is play. Grab the crank and try to jiggle it force-
fully. It must be absolutely free of play (f). If you notice any play, contact your
SCOTT dealer immediately.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 82
b ca
Depending on the gear system, gear shifting is initiated by actuating a shift
lever, a brake and shift lever unit or by a short turn of the wrist with twist grips.
Continue pedalling during gear shifting (a), however, at reduced pedalling force.
Find below the principles of the shift lever types and their operation. It is, how-
ever, also possible that your new SCOTT bike has a gear system that is not listed
below.
With shift levers pressing the large shifter (b) (thumb shifter) normally moves
the chain towards the larger chainrings/sprockets.
That means that any gear shift with the right thumb produces a lower gear. This
is an indexed shifting system with the option of shifting several gears with one
action. Actuating the large thumb shifter on the left produces a higher gear.
Pulling the small lever (c) located in front of the handlebars from the rider’s
viewpoint and actuated with the index finger (index finger lever) shifts the chain
towards the smaller chainwheels/sprockets, i.e. on the right side to the higher
gears and on the left side to the lower gears.
The principle of twist grips (d) is slightly different. Turning the right-hand grip
towards you makes for a lower gear ratio, while the same movement on the left
produces a higher gear – and vice versa. The shifting direction may vary in this
case, as well.
WARNING
Always wear straight-cut trousers or use trouser clips (e) or the like to make
sure your trousers do not get caught in the chain or the chainrings. Risk of
falling!
Shifting gears under load, i.e. while pedalling hard, can make the chain slip.
At the front derailleur the chain may even slip off the chainrings and result in
an accident! At least the service life of the chain will be shortened considera-
bly.
ENGLISH 83 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
NOTICE
If there is play between bearing shaft and cranks, they can sustain damage.
Risk of breakage!
Avoid gears which involve an extremely oblique run of the chain, as this will
increase wear!
It is crucial when switching gears to continue pedalling smoothly and
without too much force. Do not shift under load, and in particular not at the
front derailleur, as this will shorten the service life of your chain considerably.
Furthermore, this can lead to a chain-suck, i.e. the chain can get jammed
between chainstay and chainrings.
SAFETY INSTRUCTIONS
Read in any case carefully the operating instructions of the gear manufac-
turer. Make yourself familiar with your new gears in an area free of traffic,
if necessary. If you are in doubt or if you have any questions, contact your
SCOTT dealer.
Checking and readjusting
The derailleur gears of your bike were carefully adjusted by your SCOTT dealer
before delivery. However, Bowden cables may stretch a little on the first kilo-
metres, making gear shifting imprecise and the chain rattle.
Adjusting the front and rear derailleur (f) accurately is a job for an experienced
mechanic. If you want to try to do the adjustment on your own, observe in ad-
dition the manual of the gear manufacturer. If you have any problems with the
gears, contact your SCOTT dealer.
WARNING
For your own safety, bring your SCOTT bike to your SCOTT dealer for its first
inspection after 100 to 300 kilometres, 5 to 15 hours of initial use or four to
six weeks, and at the very latest after three months.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 84
b ca
Adjusting the rear derailleur
Increase the tension of the Bowden cable by turning the adjustable cable stop
at the shifter lever (a) or the adjusting bolt through which it runs into the rear
derailleur (b). To do so, shift to the smallest sprocket and turn the bolts anti-
clockwise in half turns until the cable is slightly tensioned. After tensioning the
Bowden cable check whether the chain immediately climbs onto the next larger
sprocket. To find out you either have to turn the cranks by hand (c) or ride your
SCOTT bike and shift through the gears.
If the chain easily climbs onto the next larger sprocket, check whether it just as
easily shifts to the small sprockets. If it does not, release the respective adjusting
bolt a little. You may need several tries.
WARNING
Adjusting the front and rear derailleur accurately is a job for an experienced
mechanic. Observe in any case the manual of the gear manufacturer. If you
have any problems with the gears, contact your SCOTT dealer.
SAFETY INSTRUCTIONS
Ask a helper to lift the rear wheel or hang the SCOTT bike into a work stand.
By turning the cranks and shifting through you can easily check the function.
Adjusting the limit stops
The rear derailleur is equipped with limit screws (d) which limit the movement
range of the derailleur, thus preventing the derailleur and chain from colliding
with the spokes or the chain from dropping off the smallest sprocket. The limit
screws are adjusted by your SCOTT dealer. They do not alter their position dur-
ing normal use.
ENGLISH 85 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
If necessary, correct the position by means of the limit screws. The limit screws
on rear derailleurs are often marked “H” for high gear and “L” for low gear. High
gear means that the chain is running on the smallest sprocket. Turn the screw
clockwise to move the rear derailleur towards the wheel and anticlockwise to
move it away from the wheel (e).
Shift to the largest (inmost) sprocket and check whether the teeth of the
sprocket and the teeth of the guide pulley are all in a perfectly vertical line (f).
Turn the limit screw marked “L” clockwise until the rear derailleur stops moving
towards the spokes and can neither be moved by actuating the shift lever nor
by pushing it with your hand. Turn the cranks carefully.
This adjustment prevents the chain from getting stuck between sprocket and
spokes or the rear derailleur or the derailleur cage from touching the spokes,
which could result in damage to the spokes, the rear derailleur and the frame. In
the worst case, this could result in a fall or accident.
WARNING
If your SCOTT bike has tipped over or the rear derailleur received a blow, the
rear derailleur or its mount, also referred to as the derailleur hanger, might
be bent. Risk of material failure and accident. It is advisable to check its
range of movement and readjust the limit screws, if necessary, after such an
incident or after mounting a new rear wheel on your bike.
Do a test ride in a place free of traffic, after adjusting the gears of your bicy-
cle.
SAFETY INSTRUCTIONS
Let your SCOTT dealer maintain and service your SCOTT bike regularly.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 86
b ca
Adjusting the front derailleur
The range within which the front derailleur keeps the chain on the chainring
without itself touching the chain is very small. If the chain tends to jump off the
chainring, you will need to reduce the movement range in the same way as with
the rear derailleur, i.e. by turning the limit screws marked “H“ and “L(a). The
limit screws are adjusted by your SCOTT dealer. They do not alter their position
during normal use.
As with the rear derailleur, the cable of the front derailleur (b) is subject to
lengthening which leads to a reduced precision in gear changing. If necessary,
shift to the small chainring and increase the tension of the Bowden cable by
turning the adjusting bolt through which it passes at the entry to the gear shifter
(c).
WARNING
Always check after an accident whether the guide plates of the front derail-
leur are still parallel to the chainrings. Make sure they do not touch the large
chainring which would block the drive. Risk of accident!
Adjusting the front derailleur is a very delicate job. Improper adjustment can
cause the chain to jump off, thus interrupting the power train. This can cause
a fall!
Do a test ride in a place free of traffic, after adjusting the gears of your bicycle.
ENGLISH 87 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
MULTI-SPEED HUBS (INTERNAL GEAR HUBS)
Operation and control
The advantages of multi-speed hubs (d+e) are their enclosed design. Unlike de-
railleur gears the gear drive is within the hub body, only the primary ratio from
the chainring to the sprocket being outside. What is more, all the gears can be
shifted through with one gear shifter.
Provided that it is serviced regularly, the drive chain has a comparatively longer
service life. And this applies even more if it is protected from the influences of
the weather by a sealed chain box.
With multi-speed hubs normally the power transmission and the gear ratio
adjustment is guaranteed via one or several planetary gears, depending on the
number of gears. To change gears the pedal force should be reduced shortly.
In contrast to derailleur gears, multi-speed hubs cannot only be combined
with manually actuated brakes (rim, drum, roller or disc brakes), but also with
back-pedal brakes (f) (roller or drum brakes) that are actuated by a reverse
rotation of the pedals. The best braking power is achieved with the pedals on a
horizontal level.
WARNING
Always make sure changing gears makes as little noise as possible and is
absolutely jerk-free.
Make yourself familiar with the operation of your gears in a place free of traf-
fic and practise operating the shifters or the twist grips as well as the brake
system, before using your bike on public roads.
There are some multi-speed hubs where the effects of the back-pedal brake
depend on the selected gear. Read the gear manufacturer’s manual carefully
and make yourself familiar with the brake function before using your bike on
public roads.
SAFETY INSTRUCTIONS
Removing and mounting wheels is not the same as with derailleur gears.
With this fact in mind read the chapter “Repairing tyre punctures” and ob-
serve the notes given in the manual of the manufacturer.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 88
b ca
Check, readjustment and maintenance
Multi-speed hubs require only little maintenance and need not be adjusted very
often. Check the chain tension (a), in particular when removing and mounting
wheels, and read the chapter “Bicycle chain“.
If the indexed gear change does not work trouble-free, then contact your
SCOTT dealer.
Adjusting multi-speed hubs
Shift into the fourth (4th) gear. Look from above at the right-hand side of the
hub. There you can see two yellow markings. These two markings must be at
the same height (b), i.e. they must produce a line.
Turn the adjusting screw at the shifter (c) until you get just one single line.
WARNING
Regularly check the reliable fit of the bolted connection of the hub and, if
necessary, of the torque support (d) (“brake torque arm) at the frame.
Shimano recommends for example regular maintenance (oil change) every
5,000 km or every two years. Read the manual of the gear manufacturer or
contact your dealer.
SAFETY INSTRUCTIONS
Observe the manual of the gear manufacturer. If you are in doubt or if you
have any questions, contact your SCOTT dealer.
ENGLISH 89 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
GATES BELT DRIVE
With the Gates belt drive (e) a carbon drive belt replaces the usual chain. This
works only in connection with a gear hub. The carbon drive belt is made of car-
bon fibres which reduces the weight significantly and requires less maintenance
by offering smoother running and comfort than a chain. In addition, the belt is
more resistant to corrosion and the influence of direct sunlight.
Maintenance and care
Thanks to the carbon fibre surface, the belt remains free of dirt. Therefore, it will
do to clean the belt with water, if necessary. The carbon drive belt needs neither
lubrication nor oiling.
Checking the belt tension
The optimum operation of the Gates belt drive requires the proper tension of
the belt (f). An unusually low tension can make the belt skip and thus affect the
performance. A too high tension of the belt will render the drive sluggish and
unnecessarily increase the wear of the belt and the bearings.
On SCOTT bikes with vertical drop-outs re-tensioning the belt is not necessary,
in case you need to replace a flat tyre.
SAFETY INSTRUCTIONS
For easy setting of the tension download the Gates Carbon Drive
iPhone®-App (available free of charge in the iTunes® App Store), use the
Carbon Drive Krikit Gauge or the Eco Tension Tester (available in Europe at
present).
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 90
b ca
BICYCLE CHAIN
Regular and correct lubrication of your bicycle chain ensures enjoyable riding
and prolongs its service life. It is not the quantity but the distribution and regular
application of lubricant that counts. Clean the dirt and oil off your chain with a
slightly oily rag from time to time (a). Special degreasers are not necessary; they
even have a damaging effect.
Having cleaned the chain as thoroughly as possible, apply chain oil, wax or
grease to the chain links (b). To lubricate the chain, drip the lubricant onto the
rollers of the lower run of the chain while you turn the crank. Once this is done,
turn the cranks a few more times; then let your SCOTT bike rest for a few min-
utes so that the lubricant can disperse. Finally wipe off excess lubricant with a
rag so that it does not spatter around during riding or can collect road dirt.
WARNING
Make sure the braking surfaces of the rims, the rotors and the brake pads
remain clear of lubricants, otherwise the brake can fail!
NOTICE
For the sake of the environment, use biodegradable lubricants only. Bear in
mind that some of the lubricant can end up on the ground, especially in wet
conditions.
ENGLISH 91 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
CHAIN MAINTENANCE
Although the chain is one of the wearing components of your SCOTT bike, there
are still ways for you to prolong its life. Make sure the chain is lubricated regular-
ly, especially after riding in the rain. Try to only use gears which run the chain in
the straightest line between the sprockets and chainrings and get into the habit
of high cadence pedalling.
Chains on bicycles with derailleur gears are worn out after approx. 1,000 to
3,500 km or 50 to 125 hours of use. Heavily stretched chains impair the op-
eration of derailleur gears. Cycling with a worn-out chain also accelerates the
wear of the sprockets and chainrings. Replacing these components is relatively
expensive compared with the costs of a new chain. It is therefore advisable to
check the condition of the chain at regular intervals.
Your SCOTT dealer has accurate measuring instruments to check the chain
wear (c). Replacing the chain should ideally be left to an expert, as this requires
special tools. In addition, you need to select a chain matching your gear system
(d+e).
WARNING
An improperly joined or heavily worn chain can break and cause an accident.
SAFETY INSTRUCTIONS
When replacing your chain, only use appropriate and suitable original spare
parts (f). Your SCOTT dealer will be pleased to help you.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 92
b ca
WHEELS AND TYRES
The wheel consists of the hub, the spokes and the rim. The tyre is mounted onto
the rim so that it encases the tube in the case of the most common system, i.e.
the clincher or folding tyres. There is a rim tape running around the rim well
(a) to protect the sensitive tube against the edges of the rim trough, which are
often sharp.
Another common system comprises tubeless tyres which require specific rims
without boreholes and firmly screwed valves.
The wheels are subjected to considerable stress through the weight of the rider
and any carried luggage as well as through bumpy road surfaces and terrain.
Although wheels are manufactured with great care and delivered accurately
trued, spokes and nipples can lose a little tension on the first kilometres. Ask
your SCOTT dealer to check and true up the wheels after you have bedded
them in over about 100 to 300 kilometres or 5 to 15 hours of use.
After the bedding-in period, check the wheels regularly. It will, however, rarely
be necessary to retighten the spokes (b).
NOTICE
Truing (retruing) wheels is a difficult job which you should definitely leave to
your SCOTT dealer.
SAFETY INSTRUCTIONS
Tubeless tyres will not be considered any further in the following. Read the
manuals of the rim manufacturer, the tyre producer and ask your dealer for
advice.
ENGLISH 93 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
NOTES ON TYRES, INNER TUBES, RIM TAPE, INFLATION PRESSURE
The tyres should provide grip and traction. At the same time they should run
smooth and enhance the rider’s comfort by absorbing small shocks. Both the
rolling friction and the grip depend on the nature of the tyre carcass, the rubber
compound and the tyre tread. Your SCOTT dealer will be pleased to help you
choose from the numerous types of tyres (c).
If you want to mount a new tyre, you need to observe the sizing system and the
actual size of the old tyre. The latter is specified in two different units on the side
of the tyre. One of the sizes is the standardized size in millimetres which is more
precise, e.g. the number sequence 40-622 (d) means that the tyre is 40 mm in
width when fully inflated and has an inner tyre diameter of 622 millimetres. The
other size is indicated in inches (e.g. 28x1.5”).
Tyres must be inflated to the proper inflation pressure to provide an optimal
compromise between smooth running and riding comfort. Properly inflated
tyres are also more resistant to punctures. An insufficiently inflated tyre can
easily get pinched (“snakebite”) when it goes over a sharp kerb.
The air pressure recommended by the manufacturer is given on the side of the
tyre or on the type label (e). The lower of the two pressure specifications makes
for better cushioning for lightweight riders and is therefore best for cycling on
a rough surface. Rolling resistance on level ground decreases with growing
pressure, but so does comfort. Highly inflated tyres are therefore most suitable
for heavy riders and for riding on tarred roads. Therefore, adjust the pressure to
your weight and your riding habits.
Inflation pressure is often given in the old system of units, i.e. in psi (pounds per
square inch). The table (f) gives the most common pressure values in terms of
both systems.
Clincher and folding tyres and rim alone are not able to hold the air. Therefore,
an inner tube has to be placed inside the tyre to retain the air pressure.
Rims of clincher and folding tyres require in general a high-value rim tape over
the complete width of the rim base. This rim tape protects the inner tube from
the braking heat which could make the tyre burst.
psi bar psi bar
45 3.1 75 5.2
50 3.4 80 5.5
55 3.8 85 5.9
60 4.1 90 6.2
65 4.5 95 6.6
70 4.8 100 6.9
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 94
b ca
WARNING
Replace tyres with a worn tread or with brittle or frayed sides. Dampness
and dirt penetrating the tyre can cause damage to its inner structure. The
tube might burst. Risk of falling!
If you mount a new tyre with another size than the standard tyre mounted,
it might be possible that the clearance between the front of your shoe and
the wheel will be reduced when you ride at reduced speed. Also observe the
space between fork and frame. Risk of accident!
Treat your tyres with care. Always ride your bike with the prescribed tyre
pressure (a) and check the pressure at regular intervals, at least once a
week. Riding with too low or too high air pressure may make the tyre come
off the rim or burst.
Clincher and folding tyres allowing an inflation pressure of five bars or more
have to be mounted on hook bead rims, identifiable by the designation “C”.
SAFETY INSTRUCTIONS
Observe the maximum pressure value of the rim. The pressure is dependent on
the tyre width. You can find the values in the operating instructions of the rim or
wheel manufacturer.
Note that a pedelec weighs more and that your usual tyre pressure may be
insufficient. A higher pressure gives a better riding stability and reduces the
risk of a puncture. The minimum and maximum pressure (in bar or PSI) is
indicated on the tyre side.
VALVES
There are three valve types in general use on SCOTT city and trekking bikes:
1. Sclaverand or Presta valve (b): This valve is nowadays used on almost all
types of bikes. It is designed to withstand extremely high pressures.
2. Schrader or American valve (c): This is an adapted car tyre valve.
3. Dunlop or Woods valve (d): The usual valve.
All valve types come with a plastic cap to protect them from dirt. The Schrader
and Dunlop valve can be inflated with a suitable pump directly after removing
the protective cap.
ENGLISH 95 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
With Presta valves you first have to undo the small knurled nut a little and de-
press it carefully until air starts to escape. Check the nut is tightened and seated
in its stem, otherwise air may slowly leak out. Do not forget to tighten the valve
by hand nut after inflating.
Tyres with Schrader valves can conveniently be inflated at car filling stations
with a compressed air dispenser. The same applies to Dunlop and Presta valves
fitted with a special adapter. A compressed air dispenser must be used very
carefully as you may otherwise overinflate the tyre and make it burst.
To let out air, press the needle in the centre of the Schrader valve or the knurled
nut of the Presta valve (e).
In the case of the Dunlop valve unscrew the knurled nut until air comes out of
the valve. Retighten the knurled nut subsequently. Normally, you have to inflate
the tyre completely.
It can be hard to inflate tyres to the necessary pressure by using hand pumps. It
is much easier with a track pump equipped with a pressure gauge.
RIM TRUENESS AND SPOKE TENSION
For the true running of the wheel it is imperative that the tension exerted by
the spokes is distributed evenly around the rim. If the tension of a single spoke
changes, e.g. as a result of riding fast over a kerb or of a loose nipple, the tensile
forces acting on the rim become unbalanced and the wheel will no longer run
true. The functioning of the SCOTT bike may even be impaired before you no-
tice the wobbling appearance of a wheel that has gone out of true.
With rim brakes the sides of the rims also serve as braking surfaces. An untrue
wheel can impair your braking effect. It is therefore advisable to check the
wheels for trueness from time to time. For this purpose lift the wheel off the
ground and spin it with your hand. Watch the gap between the rim and the
brake pads. If the gap varies by one millimetre or more, you should ask your
SCOTT dealer to true up the wheel (f).
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 96
b ca
WARNING
Do not ride with untrue wheels. In the case of extreme side-to-side wobbles,
the brake pads of rim brakes can miss the rim and get caught in the spokes!
This normally instantly jams the wheel and throws you off your bicycle.
Loose spokes must be tightened at once. Otherwise the load on the other
spokes and the rim will increase.
NOTICE
Truing (retruing) wheels is a difficult job which you should definitely leave to
your SCOTT dealer.
REPAIRING TYRE PUNCTURES
Punctures during cycling are the most common cause for flat tyres. However,
as long as you have the necessary tools and a spare tube or a repair kit (a),
this need not mean the end of your cycle ride. If your wheels are attached with
quick-releases to the frame and the fork, you only need two tyre levers and a
pump (b).
SAFETY INSTRUCTIONS
Before removing a wheel, read chapters “Remounting the wheel” and “Us-
ing quick-releases”. If you are in doubt or if you have any questions, contact
your SCOTT dealer.
REMOVING THE WHEEL
If your bicycle has mechanical rim brakes (cantilever and V-brakes) you first
have to unhook the brake cable from the brake arm (c). To do this, grip the rim
with one hand and press the brake pads and/or arms together. In this position
the usually barrel shaped nipple of the lateral brake cable or the brake hose (of
V-brakes) can easily be disengaged.
ENGLISH 97 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
If you have disc brakes (hydraulic or mechanic), check the position of the brake
pads through the inspection window. In this way you will be able to tell after the
removal whether the brake pads are still in their correct position. Read the manual
of the brake manufacturer.
If you have derailleur gears, you should shift the chain to the smallest sprocket
before removing the rear wheel (d). This shifts the rear derailleur right to the
outside where it does not interfere with the removal of the wheel. Open the
quick-release of the wheel, as described in chapter “Using quick-releases”.
If you cannot remove the wheel after releasing the nuts, this is due to the drop-
out safety tabs. They come as metal catches which engage with recesses in the
drop-outs (e). Just release the quick-release adjusting nut a little and slip the
wheel past the tabs.
You will find it easier to remove the rear wheel, when you pull the rear derailleur
slightly backwards. Lift your SCOTT bike a little off the ground and give the
wheel a light blow with your hand so that it drops out.
WARNING
If you purchased a SCOTT bike with hydraulic disc brakes, never turn your
SCOTT bike upside down for repair work, i.e. with the handlebars and saddle
underneath, otherwise the brake can fail.
CAUTION
Rotors can become hot, so let them cool down before removing a wheel.
NOTICE
Never pull the (disc) brake lever while a wheel is removed and always make
sure that you fit the safety locks (f) before removing the wheel.
SAFETY INSTRUCTIONS
In the case of drum and roller brakes as well as of internal gear hubs release
the torque support (“brake torque arm“) supporting the drive and brake
forces to the frame. The shift cables and the click box must also be dis-
mounted before wheel removal.
Observe the manuals of the brake and gear manufacturer.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 98
b ca
CLINCHER AND FOLDING TYRES
Tyre removal
Remove the cap and the fastening nut off the valve and deflate the tyre com-
pletely (a). Press the tyre from the sides towards the centre of the rim around its
entire circumference. This will ease the removal.
Apply a plastic tyre lever to one bead of the tyre about 5 cm beside the valve
and lever the tyre out of the rim in this area (b). Hold the tyre lever tight in its
position. Slip the second tyre lever between rim and tyre at a distance of about
ten centimetres on the other side of the valve and lever the next portion of the
bead over the edge of the rim (c).
After levering a part of the tyre bead over the edge of the rim you should
normally be able to slip off the whole tyre on one side by moving the tyre lever
around the whole circumference. Now you can remove the inner tube. Make
sure the valve does not get caught in the rim, as this can damage the inner tube.
If necessary you can remove the whole tyre by pulling the other tyre bead off
the rim.
Repair the puncture according to the instructions of the repair kit manufacturer
or replace the inner tube by a new one.
When you have removed the tyre, you should also check the rim tape (d). It
should lie squarely in the rim trough, covering all spoke nipples, and should nei-
ther be damaged nor brittle.
In the case of double wall rims the tape must cover the entire rim base, but it
should not be so broad as to stand up along the inside edges of the rim trough.
Rim tapes for this type of rim should only be made of fabric or durable plastic. If
you are in doubt or if you have any questions, contact your SCOTT dealer.
ENGLISH 99 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WARNING
If the fabric of the tyre is destroyed by the perforating object, replace the
tyre to be on the safe side.
Replace spoilt rim tapes immediately.
NOTICE
If you get a puncture en route, inflate the inner tube and bring it close to
your ear. In most cases you can hear the air coming out. At home you can
help yourself with a bucket of water where you can locate the hole by the
bubbles. When you have found the hole, look for the corresponding place on
the tyre and check it, as well. Often, you will find a foreign body sticking in
the tyre, which ought to be removed. Otherwise another puncture can occur.
Tyre mounting
When mounting a tyre make sure no foreign matter, such as dirt or sand, gets
inside the tyre and you do not damage the inner tube in the process.
Slip one bead of the tyre onto the rim. Using your thumbs, press one bead over
the edge of the rim and then around the entire circumference. This should nor-
mally be possible without using tools.
Stick the valve of the inner tube through the hole in the rim (e). Inflate the inner
tube slightly so that it becomes round and push it into the tyre all the way round
(f). Make sure not to leave any folds in the inner tube.
To finish mounting the tyre, start at the opposite side of the valve. Using your
thumbs, press as much of the second bead of the tyre over the edge of the rim
as you can.
Make sure the inner tube does not get pinched and squashed between the tyre
and the rim. You can prevent this by pushing the inner tube into the hollow of
the tyre with a finger as you work along.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 100
b ca
Work the tyre into the rim by approaching the valve symmetrically from both
sides. Towards the end, you will have to pull the tyre vigorously downwards (a)
to make the already mounted portion of the tyre slip towards the deepest part
of the rim well. This will ease the job noticeably on the last centimetres.
Before fitting the tyre completely on the rim check again whether the inner tube
lies properly inside the tyre and press the last stretch of tyre over the edge of
the rim using the balls of your thumbs.
If this does not work, you will have to use the tyre levers (b). Make sure the bent
ends point towards the inner tube and the inner tube does not get damaged.
Push the valve subsequently a little into the tyre so that the inner tube does
not get caught between the rim and the tyre beads. Check whether the valve
stands upright. If not, dismount one bead again and reposition the inner tube.
To make sure the inner tube does not get pinched between the rim and the
bead, move the tyre sideways back and forth between the sides of the rim.
While doing so, also check whether the rim tape has shifted.
Inflate the inner tube to the desired pressure. The maximum pressure is indicat-
ed on the side of the tyre.
Check whether the tyre is properly seated by inspecting the fine witness line
just above the rim edge. This line should be even to the rim all around the tyre
(c). If it is not, deflate the tyre a little and check again. Starting from the maxi-
mum tyre pressure you can now reduce the pressure through the valve to suit
your needs. Observe the recommended tyre pressure range.
REMOUNTING THE WHEEL
Mounting the wheel is done in the reverse order of dismounting. Make sure the
wheel is correctly seated in the drop-outs and accurately centred between the
fork legs or the seat and chainstays. Make sure that the quick-release and the
drop-out catches are correctly seated (d). For more information see the chapter
“Using quick-releases”.
ENGLISH 101 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
If you have V-brakes and cantilever brakes hook up the brake cable at the brake
arm. To do this, grip the rim with one hand and press the brake pads and/or the
brake arms together. In this position the usually barrel shaped nipple can easily
be engaged (e).
If you have disc brakes, check before mounting the wheel whether the brake
pads rest snugly in their seats in the brake calliper body. The gaps between the
brake pads and the wheel should be parallel and the wear indicators in their
correct position (f). Make sure you guide the rotor carefully between the brake
pads.
If your bicycle has a multi-speed hub, back-pedal, drum or roller brakes, verify
the proper assembly of the individual components and tension the chain before
tightening the wheel nuts by pulling the wheel backwards.
Verify that the amount of play midway between sprockets and chainring is not
more than two centimetres. Make sure there is no excessive chain slack! Finish
by tightening the torque support (“brake torque arm“) to the prescribed torque
value.
All brakes:
After mounting the wheel and tightening the quick-release pull the brake lever
(several times, if you have disc brakes).
Lift your SCOTT bike off the ground and spin the wheel with your hand. With
the wheel spinning the rotor should not drag along the brake calliper or the
brake pads and the rim should keep off the (rim) brake pads.
WARNING
If you have rim brakes, make sure you hook up the brake cable immediately
after the wheel mounting!
Before setting off again check that the brake surfaces and/or rotors are still
free of grease or other lubricants after the wheel mounting.
Check whether the brake pads hit the rotors or brake surfaces of the rims.
Make sure the wheel is properly seated and firmly fixed in the drop-outs.
Always do a brake test as described in the chapter “Tests before every ride!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 102
b ca
TESTS AFTER AN ACCIDENT
1. Check whether the wheels are still firmly fixed in the drop-outs (a) and
whether the rims are still centred with respect to the frame or fork. Spin the
wheels and observe the gap either between brake pads and rim sides or
between frame and tyre. If you have rim brakes and the width of the gap
changes markedly and you have no way to true the rim where you are, you
need to open the brakes a little with the special device so that the rim can run
between the brake pads without touching them. Note that in this case the
brakes may not act as powerfully as you are used to.
No matter whether you have rim or disc brakes, have the wheels trued by
your SCOTT dealer immediately after you are back home.
For more information see the chapters “Brakes, “Using quick-releases” and
Wheels and tyres” and the manuals of the component manufacturers.
2. Check that handlebars and stem are neither twisted nor bent or broken and
that they are level and aligned. Make sure the stem is firmly fixed on the fork
by trying to twist the handlebars relative to the front wheel (b). Briefly lean
on the brake levers to make sure the handlebars are firmly fixed in the stem.
Realign the components, if necessary, and gently tighten the bolts to ensure
a reliable clamping of the components (c). The maximum torque values are
printed directly on the components or specified in the manuals of the com-
ponent manufacturers.
For more information see the chapters “Adjusting the SCOTT bike to the rid-
er” and “The headset on the SCOTT bike” and the manuals of the component
manufacturers.
3. Check whether the chain still runs on the chainwheels and the sprockets (d).
If your SCOTT bike fell over to the chain side, verify the proper functioning of
the gears. Ask somebody to lift your SCOTT bike by the saddle and carefully
shift through all the gears.
ENGLISH 103 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Pay particular attention when switching to the small gears, making sure the
rear derailleur does not get too close to the spokes as the chain climbs onto
the larger sprockets.
If the rear derailleur or the drop-outs/derailleur hanger is bent, the rear derail-
leur may collide with the spokes. This in turn can destroy the rear derailleur,
the rear wheel or the frame. Check the function of the front derailleur, as a
displaced front derailleur can throw off the chain, thus interrupting the drive
of your SCOTT bike. Risk of falling!
For more information see the chapter “Gears” and the manuals of the com-
ponent manufacturers.
4. Make sure the saddle is not twisted by using the top tube (e) or the bottom
bracket shell as a reference. If necessary, open the clamping, realign the sad-
dle and retighten the clamping (f).
For more information see the chapters “Adjusting the SCOTT bike to the
rider” and “Using quick-releases” and the manuals of the component manu-
facturers.
5. Let your SCOTT bike bounce on the ground from a small height. If there is
any rattling, check where it comes from. Check the bearings and bolted con-
nections, if necessary. Tighten them slightly, if necessary.
6. Finally, take a good look at the whole SCOTT bike to detect any deforma-
tions, colour changes or cracks.
WARNING
Ride back very carefully by taking the shortest route possible, even if your
SCOTT bike went through this check without any problems. Do not accel-
erate or brake hard and do not ride your bike out of the saddle. If you are in
doubt about the performance of your SCOTT bike, have yourself picked up
by car, instead of taking any risk.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 104
b ca
WARNING
Back home you need to check your SCOTT bike thoroughly. Damaged parts
must be repaired or replaced. Ask your SCOTT dealer for advice. For more
information on carbon components see the manuals of the component man-
ufacturer.
Deformed components, especially components made of aluminum, can
break without previous warning. They must not be repaired, i.e. straight-
ened, as this will not reduce the imminent risk of breakage. This applies in
particular to the fork, the handlebars, the stem, the cranks, the seat post and
the pedals. When in doubt, it is always the better choice for your safety to
have these parts replaced. Ask your SCOTT dealer for advice.
If your SCOTT bike is assembled with carbon components, it is imperative
that you have it checked by your SCOTT dealer after an accident or similar
incident. Carbon is extremely strong and durable with very low weight, mak-
ing it perfect for the production of high-performance parts. However, one of
the inherent properties of carbon is that possible overstress may compro-
mise the inner carbon-fibre structure without showing any visible deforma-
tion, as is the case with steel or aluminium. A damaged component can fail
without previous warning. Risk of falling!
Make it a rule to check the functioning and in particular the limit stop of the
rear derailleur after a fall or if your SCOTT bike has toppled over.
ADDITIONAL INFORMATION “TESTS AFTER AN ACCIDENT” WITH
YOUR SCOTT PEDELEC
1. Check the rechargeable battery (a-c). Try to remove the rechargeable bat-
tery from its mounting. If the rechargeable battery is no longer properly in its
holder or shows any damage, do not use your SCOTT pedelec any longer, at
least not in the assistance mode. Switch off the drive and the rechargeable
battery separately, if necessary. A damaged battery can lead to a short-cir-
cuit resulting in a sudden failure of the SCOTT pedelec assistance right at the
moment when you need it.
ENGLISH 105 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
Damage to the outer housing of the rechargeable battery can result in water
or moisture entry which can lead to short circuits or electric shocks. The
rechargeable battery may catch fire or even explode! In such a case, con-
tact your SCOTT dealer immediately. For more information see the system
instructions of your drive manufacturer.
2. Check that all values are displayed properly and fully on the control unit (d)
or the display. Do not use your SCOTT pedelec, if the control unit shows an
error message or a warning. In the case of critical errors the system switches
off automatically. In the case of non-critical errors the system may be still
operable.
Do not set off on your SCOTT pedelec when the control unit or the display
shows a warning. In such a case, contact your SCOTT dealer immediately. For
more information see the system instructions of your drive manufacturer.
3. Let your SCOTT pedelec bounce on the ground from a small height. If there is
any rattling, check where it comes from. Check the bearings, the bolts (e) and
the proper seat of the battery, if necessary.
THE HEADSET ON THE SCOTT BIKE
The headset (f) connects the fork to the frame, but allows it to move freely.
It must turn with virtually no resistance, if the SCOTT bike is to run straight,
stabilising itself as it travels. Shocks caused by uneven road surfaces expose the
headset to considerable levels of stress. In this way it can become loose and go
out of correct adjustment.
WARNING
Riding the bicycle with a loose headset increases the stress on fork and
bearings. This can lead to damage to the fork. Risk of falling!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 106
b ca
Checking and readjusting
Check the headset for play by placing your fingers around the upper head
tube race. Bring your weight to bear on the saddle, pull the front brakes with
your other hand and push the SCOTT bike firmly back and forth with the wheel
remaining on the ground (a). If the bearing has play, you will feel the upper head
tube race moving in jerks relative to the lower head tube race - visible as a small
gap in between the head tube races.
To check the bearing for ease of running, lift the frame until the front wheel is
suspended in the air (b). The handlebars should turn from far left to far right
without feeling roughness or tightness at any point. With a gentle tap on the
handlebars the fork should turn easily from the middle position.
If you face any problems during the test, contact your SCOTT dealer.
SAFETY INSTRUCTIONS
Adjusting the headset requires a certain amount of experience and should
therefore be left to your SCOTT dealer.
CONVENTIONAL HEADSETS
The adjustment tolerance between there being play in the bearings and them
being set too tight is very small. The bearing can easily be damaged. If you want
to try it nevertheless, you need two large and flat open-end wrenches (c). Ask
your SCOTT dealer for advice.
Release the top lock nut and turn the head cup below clockwise without tight-
ening it. Fix the lower head cup and retighten the lock nut.
WARNING
A too tight adjustment can destroy the bearings and affect the riding char-
acteristics.
SAFETY INSTRUCTIONS
If you want to adjust conventional headsets you will need special tools. If,
nevertheless, you want to try it by yourself, read the manual of the headset
manufacturer.
ENGLISH 107 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
THREADLESS HEADSET – AHEADSET®
The distinct feature of this system is that the stem does not sit within the fork
steerer tube, but rather slips over the fork steerer tube, which in this case is
threadless. The stem is thus an important part of the headset, as the stem
clamping fixes the adjustment. You generally only need one or two Allen keys
and a torque wrench to adjust an Aheadset®.
Release the clamping bolt(s) located on the side of the stem by one to two
turns. Gently tighten the countersunk adjusting bolt on top a little (d), e.g. by a
quarter turn, by using an Allen key.
Realign the stem to ensure that the handlebars are at right angle to the wheel.
Make sure the front wheel is in line with the top tube and the stem (e). Tighten
the clamping bolts of the stem (f). Use a torque wrench and never exceed the
maximum torque values! You will find the prescribed values in the chapter “Rec-
ommended torque settings for your SCOTT bike”, directly on the components
and/or in the manuals of the component manufacturer.
Check the headset for play as described above. Do not overtighten the headset.
Risk of headset failure!.
WARNING
Bear in mind that by overtightening the bolts the stem can crush the steer-
er tube. In particular forks with carbon steerer tubes are highly sensitive
to overtightening the steerer tube clamping at the stem. Risk of breakage!
Make sure the clamping area is absolutely free of grease when any of the
clamping faces is made of carbon. If necessary, use carbon assembly paste
in the clamping areas to ensure maximum clamping.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 108
b ca
WARNING
Check the secure seat of the stem by taking the front wheel between your
legs and trying to turn the handlebars and stem relative to the wheel (a). A
loose stem can cause an accident.
Never change the preloading mechanism in the inside of the fork steerer
tube. Never install a star nut in carbon fork steerer tubes.
NOTICE
Do not overtighten the upper bolt, it only serves to adjust the headset play
(b).
SAFETY INSTRUCTIONS
If you do not succeed in adjusting the headset, this can have several reasons.
If you are not absolutely sure, ask your SCOTT dealer for help.
RIDING A SCOTT PEDELEC
Your SCOTT pedelec is designed to be used like a conventional SCOTT bike. The
unique riding experience, however, starts when you actuate the drive system (c).
At that moment the assistance generated by the 250 W motor increases with its
high torque the stronger you pedal.
Set off for your first ride by selecting the lowest drive support (d). Gradually get
used to the additional propulsion. Slowly approach the potential of your SCOTT
pedelec in an area free of traffic.
Practise typical riding situations such as starting off and braking, tight corners
and riding on narrow cycle paths and lanes. This is where a SCOTT pedelec
clearly differs from a conventional SCOTT bike.
ENGLISH 109 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WARNING
Pull the brake lever of the rear brake and stop pedalling. The pedelec will
stop. Emergency stop! To achieve the shortest possible stopping distance
brake with both brakes in a way that the pedelec slows down gradually (see
chapter “Brakes”).
Be aware that the brakes of your SCOTT pedelec are always more effec-
tive than the drive. If you face any problems with your drive (e.g. because
it pushes you forward in front of a bend), slow down your SCOTT pedelec
carefully.
RIDING WITH MOTOR ASSISTANCE
The system is switched on and off at the buttons of the control element on the
battery or on the handlebars. Furthermore, different assistance modes can be
selected with the command console at the handlebars (e), the remaining capac-
ity of the rechargeable battery is displayed and the different functions of the
cycle computer, if available, can be selected (f).
When switched on the system activates during pedalling and the drive assis-
tance is available. Sensors measure your pedalling movements and control the
fully automated drive assistance according to the selected assistance mode.
The level of the additional propulsion depends on the assistance mode, your
speed and the amount of force applied to the pedals.
The assistance switches off when you reach a speed of more than 25 kmh.
Keep in mind that you may have to change your riding habits: Do not mount
by placing one foot on the pedal and by trying to throw the other leg over the
saddle. The SCOTT pedelec would set off suddenly. Risk of falling!
Stop pedalling earlier than you are used to before riding a turn or bend. Other-
wise there may be too much propulsion and your cornering speed may be too
high. Reduce the pedal force deliberately, before you start changing the gear.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 110
b ca
Do not give in to the temptation to always ride in a high gear, due to the strong
motor. Shift gears frequently (a) in the same way that you are used to doing
with a conventional SCOTT bike so as to make your own contribution to your
forward progress as efficient as possible. Your cadence should always be in a
smooth flow. In other words, you should pedal at more than 60 crank rotations
per minute.
Change down the gears before stopping.
Keep in mind that the other road users are not yet used to the new pedelecs
and their higher speeds. Ride with this fact in mind and anticipate the actions
of other road users. Be aware that the speed you ride at will be clearly faster
than you are used to. Therefore, keep these facts in mind and be ready to brake
whenever an unclear or a possibly dangerous situation comes into your field of
vision.
WARNING
Do a test ride in an unfrequented area (b) to make yourself familiar with the
riding characteristics of your SCOTT pedelec and the possibly higher speed
and acceleration before riding on public roads. Risk of accident! Never ride
without a helmet!
Do not step on the pedals before sitting in the saddle (c), select the lowest
drive assistance and be ready to brake when you set off. Risk of falling!
Keep in mind that due to the higher driving power at the rear wheel the risk
of an accident increases with slippery roads (due to wetness, snow, gravel
etc.). This applies all the more when riding bends. Risk of falling!
Note that car drivers and other road users may underestimate your speed.
Always wear bright clothing. Therefore, always ride on public roads with this
fact in mind and anticipate the actions of other road users. Risk of accident!
Keep in mind that pedestrians do not hear you when you approach at high
speed. Therefore, ride particularly defensive and anticipating when using
cycle lanes and cycle/footpaths to avoid accidents. If necessary, ring the bell
to warn others.
ENGLISH 111 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
USEFUL INFORMATION FOR A LONG RIDE
How long and how far you can benefit from the auxiliary drive depends on
several factors, i.e. the road conditions, the weight of the rider and any addition-
al load, the rider’s pedal force, the degree or mode of assistance, (head)winds,
frequent stops, temperature, weather conditions, topography, tyre pressure etc.
The charge state of your rechargeable battery can be read from the display of
the control element on the handlebars (d) or, additionally, on the rechargeable
battery.
NOTICE
In general, the batteries of SCOTT pedelecs have no memory effect. It is
recommended that you charge the battery after every long ride. Avoid any
deep discharge of the rechargeable battery.
SAFETY INSTRUCTIONS
For more information see the system instructions of your drive manufacturer.
To extend the range it is recommended that you ride with low assistance (Eco)
or no assistance at all on level or downhill trails and only select maximum drive
assistance (Turbo) (e) with headwinds, heavy additional loads and/or when
climbing hills.
Furthermore, you can affect the range by
- checking the tyre pressure regularly, i.e. once a week with a pressure gauge
(f), and adjusting it, if necessary
- shifting gears down in front of traffic lights and intersections or in general in
cases of stops and by setting off in low gears
- shifting gears regularly, as you would do on a SCOTT bike without drive
- not only riding in high gears
- riding with these facts in mind and always looking ahead to avoid any unnec-
essary stops
- reducing your additional load, i.e. without unnecessary luggage
- storing your battery in your home and installing it only shortly before you set
off on your SCOTT pedelec in cooler weather, in particular when it is cold
- not parking your SCOTT pedelec in the blazing sun
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 112
b ca
If your battery has not enough capacity to reach your destination, benefit from
the decisive advantage of the hybrid concept of your SCOTT pedelec: Without
drive assistance you can ride your SCOTT pedelec like a usual bike with an un-
limited range and nearly without compromising on riding characteristics.
WARNING
If your battery runs empty during the ride, do not recharge the battery with
any charger, even if it happens to be fitted with an identical connector type.
Risk of explosion! Make it a habit to charge your battery only with the sup-
plied charger (a).
RIDING WITHOUT MOTOR ASSISTANCE
You can also use your SCOTT pedelec without drive assistance, i.e. just like a
conventional SCOTT bike.
Observe some important facts, when you intend to ride without rechargeable
battery (b):
- If you want to ride without drive assistance and with the battery mounted,
you can switch on the control unit of your SCOTT pedelec to benefit from the
functions of your cycle computer.
- After you have removed the battery of your SCOTT pedelec: Keep the con-
nections of the rechargeable battery free of dirt and moisture (c).
WARNING
If the lighting set of your SCOTT pedelec (d) is powered by the rechargeable
battery, you cannot use your light when riding without battery. In this case,
do not ride without rechargeable battery.
ENGLISH 113 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
USEFUL FACTS FOR RIDING A SCOTT SPEED PEDELEC
Basically, a SCOTT speed pedelec is a pedelec, however, it is significantly faster.
Read the chapter “Riding a SCOTT pedelec” thoroughly, before reading this
chapter. Keep in mind that all tips and warnings given in the mentioned chapter
apply all the more and with still greater importance to SCOTT speed pedelecs.
Practise the handling of the still more powerful and faster SCOTT speed pedelec
and always ride with foresight.
In contrast to SCOTT pedelecs, SCOTT speed pedelecs are classified as motor
vehicles. This entails a number of regulations according to which your SCOTT
speed pedelec must be equipped:
-
Beside the bicycle typical components it must be fitted with a rear view mirror
(e).
- A SCOTT speed pedelec must have liability insurance, an operating licence or
EU type approval and the insurance marking must be attached (f).
- The tyres must have a minimum tread depth of 1 mm, as is well known for
motor vehicles. Every tyre worn down to this minimum depth must be re-
placed by an identical one; otherwise this will void the operating licence.
Inform yourself in the country where you use your SCOTT speed pedelec about
the regulations of
- using cycle lanes and paths within built-up areas,
- using lanes that are marked with a road sign allowing access for mopeds,
- using your SCOTT speed pedelec on cycle lanes which are allowed for mo-
peds,
- riding in the wrong (opposing) direction up one-way roads, even if ordinary
cyclists are permitted to do this,
- using pedestrian zones, even when they are allowed for bikes,
- using bike parking facilities,
- using forest trails
- using your SCOTT speed pedelec on lanes which are closed to motor vehi-
cles, motorcycles and mopeds,
- using your SCOTT speed pedelec on public roads and on private premises, if
authorized by the owner.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 114
b ca
WARNING
Towing child trailers or mounting and using child carriers is not permitted for
SCOTT speed pedelecs.
When riding a SCOTT speed pedelec wearing a suitable helmet (a) is com-
pulsory in Germany and Switzerland. Check the regulations on wearing hel-
mets in your country. Ask your SCOTT dealer about suitable SCOTT helmets
for SCOTT speed pedelecs.
Pull the brake lever of the rear brake (b) and stop pedalling. The pedelec will
stop. Emergency stop! To achieve the shortest possible stopping distance
brake with both brakes in a way that the pedelec slows down gradually (see
chapter “Brakes”).
For your own safety, always ride your SCOTT speed pedelec with the light
switched on (c), wear bright clothing as well as a suitable helmet and glasses.
If a component needs to be replaced, make it a rule to only use original
spare parts. Wearing parts of other manufacturers, e.g. brake pads or tyres
that are not of identical size, may cause harm to the safety of your SCOTT
pedelec or SCOTT speed pedelec. Risk of accident! In the case of SCOTT
speed pedelecs be sure to only assemble original spare parts, otherwise the
operating licence expires.
Be aware that the brakes of your SCOTT speed pedelec are always more ef-
fective than the drive. If you face any problems with your drive (e.g. because
it pushes you forward in front of a bend), slow down your SCOTT speed
pedelec carefully.
SAFETY INSTRUCTIONS
The regulations and rules for pedelecs and speed pedelecs are being revised
constantly. Read the daily press to keep you informed about current legisla-
tive changes.
Before towing a trailer with your SCOTT bike read chapter “Notes on the
transport of loads and on carrying children and/or pets with your SCOTT
bike.
Before mounting a child carrier or pannier rack, check whether your SCOTT
bike is permitted for child carriers ot pannier racks. You will find the respec-
tive information in the chapter “Intended use of your SCOTT bike” or in the
SCOTT handover report in the Quick Start Manual. Contact your SCOTT
dealer.
ENGLISH 115 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
dfe
INFORMATION FOR PROPER HANDLING OF THE
RECHARGEABLE BATTERY
Remove the rechargeable battery, if you do not use your SCOTT pedelec for
a longer period of time (e.g. during the winter season). Store the rechargeable
battery in a dry room at temperatures between 5 and 20 degrees Celsius. The
state of charge should be 50 to 70 % of the charging capacity. Check the state of
charge (d), if the rechargeable battery is left unused for more than two months
and recharge it in between, if necessary, to 50 %, i.e. until half of the LEDs.
Clean the battery housing with a dry or, if at all, a slightly moist rag. Do not
direct the water jet of a high-pressure cleaner at the rechargeable battery
or submerge the battery into water, as there is a risk of water entry and/or
short-circuit.
For more information on the proper handling of your rechargeable battery see
the system instructions of your drive manufacturer.
WARNING
Charge your battery only with the supplied charger (e). Do not use the
charger of any other manufacturer, not even when the connector of the
charger matches your rechargeable battery (f). The rechargeable battery
can heat up, catch fire or even explode!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 116
b ca
WARNING
Keep the rechargeable battery and the charger out of the reach of children!
We recommend that you charge your battery only during the day and only
in dry rooms which have a smoke or a fire detector; but not in your bed-
room. Place the battery during the charging process on a big, non-inflam-
mable plate (a) made of ceramics or glass! Unplug the battery once it has
been charged up.
Keep the rechargeable battery and the charger away from moisture and wa-
ter during the charging process to exclude electric shocks and short circuits.
Do not use a rechargeable battery or a charger that is defective. If you are in
doubt or if you have any questions, contact your SCOTT dealer.
Do not expose your battery or the charger to the blazing sun during charging.
Do not charge any other electrical devices with the supplied charger of your
SCOTT pedelec!
ENGLISH 117 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
ed
WARNING
The drive is not approved for steam cleaning, high-pressure cleaning or
cleaning with a water hose. The contact of the electrics or the drive with
water can destroy the units. The individual drive components can be cleaned
with a soft rag and neutral detergents. You may use a moist rag, but not
excessive water. Keep the rechargeable battery dry and do not submerge it.
Risk of explosion!
Make sure your rechargeable battery does not show any damage, i.e. cracks,
breakages or discolorations at the contact points (b+c). Do not use a battery
with such damage. Bring a damaged battery to your SCOTT dealer at once.
Make sure your rechargeable battery is in sound condition. Do not open,
disassemble or crush the battery (d). Risk of explosion!
Make sure your rechargeable battery is not exposed to mechanical impacts.
Keep your battery away from fire and heat. Risk of explosion!
Batteries must not be short-circuited. Therefore store them in a safe stor-
age area and make sure the battery is not short-circuited accidentally (e.g.
with metal or another battery). In addition, rechargeable batteries must not
be stored inappropriately, e.g. in a box or in a drawer where they can be
short-circuited by other conductive materials or where they can short-circuit
each other. Do not deposit any objects in the storage area (e.g. clothes).
Make sure to use the battery only for the SCOTT pedelec (e) for which it is
designed.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 118
b ca
NOTICE
When you remove your battery from the holder for charging it (a) with your
SCOTT pedelec left in the open during the charging process, you should
protect the connections, e.g. with a plastic bag against rain, water, moisture
and dirt (b). If the connections of the rechargeable battery are soiled, clean
them with a dry rag.
Make sure not to discharge your rechargeable battery completely (also
referred to as depth discharge). This can occur, when the battery has run out
completely and the SCOTT pedelec was left standing for some days. Depth
discharge will affect the rechargeable battery of your SCOTT pedelec per-
manently. A deep-discharged battery can only be recharged in exceptional
cases and with special chargers. Contact your SCOTT dealer.
If the rechargeable battery or the charger (or parts of it) must be replaced,
only use original spare parts. Contact your SCOTT dealer.
Charge the battery at an ambient temperature of approx. 20 degrees Celsi-
us. Therefore, before starting the charging, wait until the temperature of the
battery has increased or decreased after a ride in cold or hot weather.
Do not dispose of your rechargeable battery in the normal household rub-
bish (c)! It must be disposed of according to battery disposal regulations.
Therefore, sellers of new rechargeable batteries must provide collection of
old batteries and appropriate disposal. If you are in doubt or if you have any
questions, contact your SCOTT dealer.
Remove the rechargeable battery from your SCOTT pedelec, if you do not
use your SCOTT pedelec for a longer period of time. Keep it clean and dry
and make sure the battery is charged 50 to 60 % during storage
(d).
If possible, remove the rechargeable battery from your
SCOTT
pedelec if
you do not use your
SCOTT
pedelec for a longer period of time and keep it
clean and dry.
Do not charge your battery over a long period of time, if you do not need it.
When the battery is fully charged remove the charger at short term.
ENGLISH 119 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
SAFETY INSTRUCTIONS
Lithium-ion batteries have no memory effect; they can therefore be charged
at any time without affecting battery life.
Also observe the notes on the respective labels on the rechargeable battery
or on the charger.
For more information on the proper handling of the rechargeable battery see
the system instructions of your drive manufacturer.
SCOTT KIDS’ BIKES
USEFUL INFORMATION FOR PARENTS
Children are among the most vulnerable road user groups, not only because of
their lack of experience and practice, but also for the simple reason that they
are smaller and may therefore have difficulties overseeing things and be easily
overlooked by other road users.
If you want your child to use his/her SCOTT kids’ bike (e) on the road, you
should be willing to invest time in road Safety INSTRUCTIONS and help him/her
improve his/her riding skills.
Children are not as observant as adults, and you should therefore get into the
routine of checking the SCOTT kids’ bike (f) and performing adjustments and
maintenance as necessary. If you are in doubt or if you have any questions, con-
tact your SCOTT dealer.
Bear in mind that it is your responsibility to supervise your child on his/her first
rides – do not overchallenge your child! Inform yourself about the traffic rules
in your country. They vary from country to country. For example, in Germany,
children must use the pavement until they are eight years old and they are per-
mitted to do so until the age of ten.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 120
b ca
It is essential that your child has good control of his/her SCOTT kids’ bike before
riding on public roads. As a first step in this direction we recommend that you
give your child a scooter or a SCOTT walker (a), so that he/she can train his/her
sense of balance.
This being accomplished you will need to make your child familiar with the func-
tioning of the brakes and gears (b) before you let him/her sit on his/her SCOTT
kids’ bike. Find a place away from the road, ideally a backyard or park, where
you can practise braking and shifting gears with your child under your supervi-
sion.
Once your child has progressed to a point where he/she can ride in traffic (c+d),
teach him/her how to cross kerbs and railway tracks, i.e. to cross these obsta-
cles, if possible, at right angle. Your child should also learn to look ahead and
back for any danger before taking this kind of obstacle.
Set a good example when it comes to wearing a cycling helmet (e) and to riding
on cycle lanes. It is also advisable to let your child take part in road safety les-
sons offered at schools or by local clubs and associations.
WARNING
It is important to tell children when they practise braking that in wet condi-
tions the brake performance is less effective and the tyre grip reduced and
that they should therefore ride more slowly and brake more carefully.
Take care your child is wearing the helmet while cycling only. For example,
wearing the helmet at a park or playground can be hazardous; the helmet
can get caught on features or obstacles and result in strangulation by helmet
straps.
Children should not ride near precipices, staircases or swimming pools as
well as on paths used by automotive mobiles.
ENGLISH 121 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WARNING
Make sure the child always wears a properly fitting cycling helmet and well
visible, i.e. bright, clothing. It is also advisable to wear reflector stripes to
increase visibility.
Children can be vain. Therefore, buy a cycling helmet that the child feels
happy with. Take your child with you to make sure you buy one which is
comfortable and fits correctly. This will increase the chances that the helmet
is actually worn, which one day might be a life-saver. Make sure the helmet is
always fastened!
When you buy the helmet, have yourself explained how to adjust the straps
of the helmet to the head. Only a properly fitted helmet can provide full
protection in case of an accident!
SAFETY INSTRUCTIONS
Make sure the cycling helmet complies with the EN 1078 test standard.
ADJUSTMENT
Adjusting the SCOTT kids’ bike to the bodily proportions of a child is even more
important than in the case of an adult. When determining the saddle height you
should find a compromise that allows the child to reach the ground with both
feet (f) when sitting in the saddle while at the same time giving them enough
space for pedalling. A safe standing (when stopping) takes absolute priority!
Handlebars that are too far away from the saddle or adjusted in a too high/low
position can also lead to the fact that the child is less confident and relaxed dur-
ing cycling. Normally, children’s bicycles allow adjustments of the saddle tilt and
sometimes the tilt of the handlebars can be adjusted, as well.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 122
b ca
Special attention should be paid to the adjustment of the control elements, such
as brake levers. Easy reach and operation should be ensured for the child (a).
For more information on how to perform the adjustments of the SCOTT kids’
bike to the proportions and needs of your child, read the chapter ”Adjusting
the SCOTT bike to the rider”. If you are in doubt or if you have any questions,
contact your SCOTT dealer.
Get into the habit of doing the checks as described in the chapter “Tests before
every ride“ together with your child. In this way, your child will learn to handle
the SCOTT kids’ bike properly and you will be able to detect any defects that
have developed during use.
Encourage your child to tell you, if anything should not be working properly on
his/her SCOTT kids’ bike. Rectify the fault immediately or take the SCOTT kids’
bike to your SCOTT dealer for repair.
CAUTION
Children and adolescents need to have the saddle height and the position of
saddle (b) and handlebars (c) checked at least every 3 months!
SAFETY INSTRUCTIONS
SCOTT recommends not using training wheels. Only buy training wheels, if
at all, that have been certified, for example, according to DIN/GS.
If you wish to install training wheels, ask your SCOTT dealer about suitable
models. Read the mounting instructions of the supplier and ask, if necessary,
your SCOTT dealer for further information.
The training wheels are only an unsatisfactory riding aid for very small
children and should be removed as soon as possible to train the sense of bal-
ance of your child.
ENGLISH 123 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
LIGHTING OF YOUR SCOTT BIKE
For riding on public roads a functioning lighting set is obligatory (see the chap-
ter “Legal requirements for riding on public roads”).
You should be familiar with the assembly of the lighting set so that you can
repair possible failures yourself.
DYNAMO-OPERATED LIGHTING SYSTEM
Rear light and front lamp are powered by the generator (also referred to as dy-
namo). They are connected with two cables each to the generator (d). In some
cases the front lamp and the rear light are wired with only one cable each the
frame being in this case the return line.
REAR LIGHTING
One or more LEDs beam through a (red) diffusion disc rearwards and are visible
at best even from the side. Nowadays, most rear lights (e) provide a stand light
function that is powered by a capacitor or a battery when the SCOTT bike has
to stop at traffic lights, for example.
FRONT LIGHTING
Todays illuminants are LEDs (“light emitting diodes”) beaming white light by
means of state-of-the-arts mirror optics and/or a diffusion disc on the road lane.
Some models are fitted with a sensor that switches on the front lamp (f) auto-
matically when it gets dark; the dynamo must, however be activated. An addi-
tional feature of particularly high-quality front lamps is a stand light function or
even daytime running lights (both with LEDs).
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 124
b ca
HUB DYNAMO
Hub dynamos (a) are built into the hub of the front wheel. They are virtually
non-wearing and extremely effective. Some models are switched on electroni-
cally, some others mechanically. Hub dynamos are either switched on by a lever
at the handlebars or directly at the front lamp (b). Other models offer the com-
fort of being switched on and off automatically by means of a sensor.
SPECIAL CASE – PEDELECS
In some countries it is allowed for SCOTT pedelecs to feed the lighting from the
battery (c). Even if the motor no longer works, because the battery is empty, the
residual current will do for the lighting. Without battery, however, you must not
ride.
BATTERY-OPERATED OR RECHARGEABLE-BATTERY-OPERATED
LIGHTING
The regulations on the use of battery or rechargeable battery-operated front
lamps (d) and rear lights are different in each country. Familiarize yourself with
the relevant country-specific regulations and comply with the road traffic regu-
lations in your country (e).
Ask your SCOTT dealer for suitable battery-operated or rechargeable-bat-
tery-operated lightings.
For more information see the chapter “Legal requirements for riding on public
roads“.
WARNING
An incomplete or inoperative lighting set is not only against the law, it is also
a hazard to your life. Cyclists riding in the dark without a light are liable to be
overlooked and at risk of getting involved in serious accidents!
SAFETY INSTRUCTIONS
Rechargeable battery-operated lights do not have a memory effect. Charge
the rechargeable batteries of the lights at regular intervals, e.g. after every
long ride.
ENGLISH 125 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
SAFETY INSTRUCTIONS
Read the manuals of the lighting and dynamo manufacturers carefully and
follow their instructions. In case you need more information on your lighting
set contact your SCOTT dealer.
USEFUL FACTS ABOUT THE SCOTT BIKE
HELMETS AND GLASSES
Cycling helmets (f) are absolutely recommendable. Your SCOTT dealer has a
variety of styles and sizes.
Make sure the helmet complies with the test standard EN 1078 or the like (de-
pending on the country where you use it). Cycling helmets are only approved
for use during cycling. Observe the manufacturer’s instructions.
WARNING
Never ride without a helmet and glasses! But remember that even the safest
helmet is useless unless it fits properly and is correctly adjusted and fas-
tened.
In addition to a cycling helmet and suitable clothing, cycling glasses are abso-
lutely essential when you are riding your SCOTT bike. They do not only protect
your eyes from the sun and the wind, but also keep out flies and other impurities
that may impede your vision when they fly into your eyes. Being temporarily
without sight may result in an accident or fall!
Good cycling glasses should fit tightly on your face not allowing any wind to af-
fect your eyes. Cycling glasses come in a wide range of models, such as glasses
with clear lenses and without UV protection for cycling in the dawn and at night
or glasses with maximum UV protection for cycling under extreme sunlight.
Your SCOTT dealer has a wide range of cycling glasses available and will be
pleased to advise you.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 126
b ca
CLOTHING
Cycling trousers (a) are essential if you want to sit comfortably. These close-fit-
ting trousers, at least at the inside, have special padding in the seat. They have
no seams that can press into you and they do not form folds. Cycling trousers
are therefore designed to be worn next to the skin.
Since sporty cycling will soon bring you out in a sweat, a jersey made of syn-
thetic materials is ideal (b). The fibres themselves do not take up any moisture
but instead wick the sweat away from the skin up to the surface of the materials
and thus prevent you getting cold from the cool wind produced by your speed.
On longer tours you should in addition have suitable protection against the rain.
Your SCOTT dealer will be glad to help you choose the right equipment.
WARNING
Never ride with wide-cut trousers or skirts that might get caught in the
spokes, chain or chainrings. To avoid any such mishap, use suitable clips or
straps, if necessary.
For increased visibility to other road users be sure to wear striking and
bright-coloured clothing!
PEDALS AND SHOES
Cycling shoes (c) should be made of solid material to provide firm support for
your feet. In addition, they should have a stiff sole so that the pedal cannot
press through. The sole should not be too wide in the area of the heels, as the
rear stays or the crank will otherwise get in the way of your pedalling. This will
prevent your feet from assuming a natural position when pedalling and may
cause knee pain in the long run. Your SCOTT dealer has a wide range of shoes
available and will be pleased to advise you.
Special cycling shoes are obligatory, if your SCOTT bike is equipped with clip-
less pedals. With these shoes cleats are fixed to the sole. They give you a firm
connection between shoe and pedal and allow depending on the model an at
least acceptable walking position.
ENGLISH 127 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
The main advantage is that these clipless pedals (d) prevent your feet from slip-
ping off when pedalling fast. They enable you not only to push but also to pull
the pedals. This makes your pedalling more smooth and increases the power
transmission compared to normal pedals.
The usual way to engage with the pedal is to turn it from the lowest position of
the crank to the horizontal using the tip of the cleat and push down on the back
of it. Normally, the shoe engages with the pedal with a click which you will hear
and feel clearly.
The release force of clipless pedals is adjusted by means of an Allen key (e). At
the beginning the setting should allow an easy release. Once you have more
practice, you can tighten the setting.
If there are any creaking or squeaking noises, which occur, some grease will
solve the problem in most cases. These noises as well as lateral play of the shoe
on the pedal can, however, also be signs of wear. Check the cleats at regular
intervals.
WARNING
Make sure the fastening bolts of the cleats are properly tightened, as you will
find it almost impossible to disengage your shoe from the pedal if the cleat
is loose. Risk of falling!
Taking up the pedals, engaging and disengaging the shoes should first be
practised when stationary (f). Later on you can refine your technique in a
place clear of traffic.
Only use clipless pedals allowing you to engage and disengage smoothly. A
defective pedal or a badly worn cleat can make the shoe disengage from the
pedal. Or unclipping the shoe from the pedal is sometimes very difficult or
even impossible. In both cases there is the danger of a fall!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 128
b ca
WARNING
Make sure that the pedals and shoe soles are always clear of mud and other
foreign bodies and grease the lock-in mechanism with lubricant at regular
intervals (a).
Some cycling shoes with cleats are only suitable for walking to a limited ex-
tent. As the cleats are sometimes thicker than the sole, they provide less grip
even on a non-slip ground. Be particularly careful.
SAFETY INSTRUCTIONS
Ask your SCOTT dealer for advice about the different shoe and pedal mod-
els. Cycling shoes come in various styles for specific uses.
Read the manual of the pedal manufacturer.
ACCESSORIES
In purchasing this SCOTT bike you laid the foundation for many years and miles
of enjoyable cycling. Whatever you are planning to do with your SCOTT bike,
be sure to have proper equipment and to keep a few tips in mind. Your SCOTT
dealer has a variety of useful accessories on offer enhancing both your safety
and convenience.
Your SCOTT bike can be fitted with various kinds of accessories (b). Make
sure to observe the requirements according to the traffic regulations in your
country and of the EN standards. Any retrofitted part must be compatible with
your SCOTT bike. If you are in doubt or if you have any questions, contact your
SCOTT dealer.
WARNING
Unsuitable accessories may change the qualities of your SCOTT bike and
even cause an accident. Therefore, before fitting any accessories contact
your SCOTT dealer and observe the instructions regarding the intended use
of your SCOTT bike.
ENGLISH 129 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WARNING
Retrofitted accessories, such as mudguards, pannier racks etc. can impair
the functioning of your SCOTT bike. Ask your SCOTT dealer for advice be-
fore mounting any kind of accessories to your bike.
SAFETY INSTRUCTIONS
Before buying any additional bells or lighting accessories, inform yourself
thoroughly whether they are permitted and tested and accordingly ap-
proved for use on public roads. Make sure additional battery/accumula-
tor-powered lamps are marked with the wavy line and the letter “K(c).
Bar ends
Flat handlebars can be equipped with bar ends (d). Some thin-walled handle-
bars (primarily those made of aluminium or carbon fibre) require additional
handlebar plugs or other special parts to prevent the handlebars from being
crushed or broken. Be sure to have them mounted by your SCOTT dealer!
Bicycle locks
Do not forget to take a high quality D- (e) or chain lock with you on your ride.
The only way to effectively protect your SCOTT bike against theft is to lock it to
an immovable object.
Puncture kit
The most important accessories for a successful cycle tour are a tyre pump and
a small tool kit. The tool kit should include two plastic tyre levers, the most com-
monly used Allen keys, a spare tube, a tyre repair kit and a little cash (f). In this
way you will be well prepared in the event of a puncture or some other mishap.
Take your mobile phone with you, as well.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 130
b ca
Cycle computers
Electronic tachometers determine the travelling and average speed, the number
of kilometres per day and year, and also the travelling time (a). Top-end models
show the highest speed that was reached, the difference in height, the cadence
or (with a special chest strap) your pulse rate as well.
Today, there are global positioning systems (GPS) and specific power meters for
optimal training on the market which are compatible with your SCOTT bike.
Kickstand
Bike kickstands (b) are intended to prevent your bike from falling over when it is
parked. The kickstand should be chosen according to the kind of use that it will get.
Your SCOTT dealer would be glad to advice you in detail about a suitable type
of kickstand. Have the kickstand installed by your SCOTT dealer.
Mudguards/wheel protections
If you want to mount mudguards on your SCOTT bike, ask your SCOTT dealer
for advice. There are removable mudguards (c), also referred to as clip-on mud-
guards, as well as firmly attached models that provide more protection against
moisture and dirt.
Retrofittable mudguards for fix fastening are usually made of plastics and are
secured in the correct position by means of additional stays. The length of the
stay is perfect when the bottom edge of the mudguard runs at an approx. dis-
tance of 15 mm parallel to the tyre.
Also make sure that neither the brakes nor the steering are affected.
For safety reasons the front wheel stays must have security fastenings. They
prevent the tyre from being blocked by impurities taken up by the front wheel
from the ground. In this case the security fastening frees the stay and hereby
prevents a possible accident. The plug connection can easily be refastened.
WARNING
Damaged mudguards should be replaced in any case. Risk of accident!
ENGLISH 131 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
TRANSPORTING LUGGAGE
There are various ways of carrying luggage on your SCOTT bike. Your choice
will primarily depend on the weight and volume of the luggage and on the
bicycle you want to use. Using a rucksack is a convenient way of transporting
luggage on a bike. However, your SCOTT bike is fitted with a pannier rack (d) for
longer cycling tours or if you intend to take heavy and bulky items with you.
It is advisable to carry luggage in stable pannier bags (e) with a very low centre
of gravity.
The lower you stow heavy items, the less the riding characteristics are affected.
Another possibility of transporting luggage are handlebar bags (f). They often
have snap buckles for quick mounting and removal. Handlebar bags are particu-
larly suitable for valuables, the photographic equipment and maps that should
be within easy reach during your tour.
When buying pannier bags, make sure they are watertight so that your belong-
ings are protected and you will not have any unpleasant surprises after the first
rain shower.
Lowrider bags fitted at the front of the bicycle are mounted to the fork by
means of special holders. If you are in doubt or if you have any questions, con-
tact your SCOTT dealer.
Do not overload your SCOTT bike. Follow the indications given in the chapters
Intended use of your SCOTT bike” and “Notes on the transport of loads and on
carrying children and/or pets with your SCOTT bike” and observe the maximum
permissible load printed or imprinted on the pannier rack. Stow heavy items as
far down as possible.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 132
b ca
WARNING
Adjust the suspension fork and the tyre pressure (a) to the additional load
(b).
Luggage generally affects the riding behaviour of your SCOTT bike and
makes your stopping distance longer! Therefore, practise riding a loaded
bicycle in a place free of traffic.
SAFETY INSTRUCTIONS
Contact your SCOTT dealer before attaching pannier bags to your SCOTT
bike.
TRANSPORTING CHILDREN ON YOUR SCOTT BIKE
The only possible and legal way of transporting children by bicycle is in special
child carriers (c) or trailers (d). Contact your SCOTT dealer.
SAFETY INSTRUCTIONS
Only buy tested child carriers, child trailers and trailer systems (e.g. DIN/EN/
GS tested systems) and have them properly mounted. The manuals of the
manufacturers included in the deliveries, provide detailed information in this
regard.
You find more information in the chapter “Notes on the transport of loads
and on carrying children and/or pets with your SCOTT bike”.
USING A CHILD CARRIER
WARNING
Check the weight card or the sticker on the bike to see if the bike model you
have chosen is allowed a child carrier/seat.
Make sure the child you are taking with you wears a helmet. Keep in mind
that you always wear a helmet (e), as well.
ENGLISH 133 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WARNING
Note that your stopping distance increases due to the additional load of the
child seat.
CAUTION
Cover the springs of your saddle to make sure that your child will not have
the fingers pinched.
SAFETY INSTRUCTIONS
Mounting and using child carriers on SCOTT speed pedelecs is permitted by
law. Look in the SCOTT handover report in the Quick Start Manual and ask
your SCOTT dealer whether child carrier mounting on your SCOTT speed
pedelec is permitted and if so, which model.
USING A CHILD TRAILER
SCOTT bikes and SCOTT pedelecs are not designed for mounting child trailers.
Contact your SCOTT dealer.
WARNING
Check the weight card or the sticker on the bike to see if the bike model you
have chosen is allowed a child carrier/seat.
Your SCOTT speed pedelec is not approved for mounting child seats, child
and transport trailers.
SAFETY INSTRUCTIONS
You find more information in the chapter “Notes on the transport of loads
and on carrying children and/or pets with your SCOTT bike”.
USING KIDS’ TANDEM BIKES/TRAILER SYSTEMS
WARNING
Trailer systems and kids’ tandem bikes are not allowed on SCOTT bikes (f).
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 134
b ca
WARNING
Towing devices have a strong influence on the riding characteristics of your
SCOTT bike. The weight of both the hitched kids’ bike and the child will
make the bicycle somewhat top-heavy. Your SCOTT bike may tend to wob-
ble. Practise getting on and off your bicycle as well as cycling. Keep in mind,
in particular when turning, that your bicycle including trailer system is much
longer.
It is also important for you to practise with your child how to behave on a
hitched bicycle during the ride. Make sure your child wears a helmet (a) even
when riding on a tandem bicycle. Set a good example by wearing a helmet,
as well!
When riding in the dark the attached kids’ bike should be fitted with the pre-
scribed lighting (b), i.e. the latter should be marked with a wavy line and the
letter “K (c). If you are in doubt or if you have any questions, contact your
SCOTT dealer. If the bottle dynamo’s roller does not spin, we recommend a
tested battery-powered rear light.
SAFETY INSTRUCTIONS
Only buy tested trailer systems (d) (e.g. DIN/EN/GS tested systems) and
have them properly mounted. The manuals of the manufacturers included
in the delivery of your trailer system, provide detailed information in this
regard.
If you want to use your SCOTT bike for towing a trailer system, check wheth-
er it is approved for towing. Have a look at the SCOTT handover report in
the Quick Start Manual or ask your SCOTT dealer for advice.
You find more information in the chapter “Notes on the transport of loads
and on carrying children and/or pets with your SCOTT bike”.
ENGLISH 135 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
TRANSPORT OF THE SCOTT BIKE OR SCOTT PEDELEC
BY CAR
Nearly every car accessory dealer and car company offers carrier systems (e)
that allow the transport of a bike without disassembly.
The usual design involves rails fixed to the roof of the car onto which the bicy-
cles are fixed with clamps gripping the down or the top tubes. This can, howev-
er, result in irreparable damage to the frame. High-end, very thin-walled alumin-
ium or carbon frames are particularly susceptible to such kind of damage. Due
to the material properties of carbon, you may not see a severe damage at first
sight. This can result in an unforeseeable severe accident at a later date. There
are, however, special suitable models available in the car accessory trade.
Rear carriers are becoming more and more popular. Their big advantage over
roof carriers is that you do not have to lift up the bicycle so high to attach it.
Make sure the clamps do not cause any damage to the fork or frame. Risk of
breakage!
Whatever system you opt for, make sure it complies with the relevant safety
standards, e.g. DIN/EN standards of your country (GS symbol).
Read the manual of your bicycle carrier and comply with the maximum load
capacity and recommended or prescribed driving speed. If applicable, comply
with the required supporting load on the trailer hitch.
WARNING
Make sure to remove all parts of your SCOTT bike (tools, pannier bags, ta-
chometers (f) etc.) which may come loose during transport. Risk of accident!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 136
b ca
WARNING
Do not buy a carrier on which the SCOTT bike has to be mounted upside
down, i.e. with the handlebars and saddle fixed face down to the carrier.
This way of fastening the bicycle exposes handlebars, stem, saddle and seat
post to extreme stress during transport. Do not opt for a carrier system with
crank arm fit. Risk of breakage!
Check whether your SCOTT bike is properly fastened before and at regular
intervals during the journey, e.g. during a stop. A SCOTT bike that detaches
from the roof carrier may endanger other road users.
Always secure your SCOTT bike or its components when putting it/them into
the interior of your car. Parts shifting around can impair your safety.
Make sure the lights and the number plate of your car are not hidden from
view. For some carriers, a second exterior rear view mirror is required by the
road traffic regulations.
NOTICE
Most clamps are a potential source of damage to large-diameter frame
tubes that are not designed to be fixed in such clamps (a)! Do not use such
systems with carbon frames.
Bear in mind that your car has a greater overall height with the bicycle on it.
Measure the overall height and place a sign stating the height somewhere in
the cockpit or on the steering wheel so that it can be easily seen.
If your SCOTT bike has disc brakes, be sure to mount the safety locks (b)
before transporting your bike with the wheels dismounted.
ENGLISH 137 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WARNING
Be sure to transport your SCOTT bike only with the wheels mounted. If
transporting your SCOTT bike with the wheels removed, make sure to mount
the safety locks. Pull the brake levers and secure them with a strong elastic
strap (c) when transporting a SCOTT bike with hydraulic disc brakes (d). This
will prevent air from entering the system.
NOTICE
Observe that due to the additional weight of pedelecs, it can be possible
that you cannot mount as much pedelecs as the carrier is designed for.
BY PUBLIC TRANSPORT
In the cities the regulations for taking SCOTT bikes (e) by public transport differ.
In some places there are for example off-times when you are not allowed to
take your SCOTT bike with you or only with an additional bicycle ticket. Inform
yourself in time about the regulations of carrying the bicycle before you start
the trip!
The regulations for taking bicycles and pedelecs with you by train (f) differ in
each country. Inform yourself in time about the respective transport regulations.
CAUTION
Remove, if necessary, heavy or bulky pannier bags and luggage for an easier
boarding and disembarking of the train.
SAFETY INSTRUCTIONS
Observe that every train traveller is normally allowed to take only one bicy-
cle with him.
Before you start your trip inform yourself in time about the conditions of
carriage and also observe the regulations and rules about bicycle transport
in the countries through which you intend to travel.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 138
b ca
WHAT TO BEAR IN MIND WHEN TRANSPORTING YOUR SCOTT
PEDELEC
By car
SCOTT pedelecs can be transported like conventional SCOTT bikes outside or
inside the car (a). Always make sure the SCOTT pedelec is securely fastened
outside or inside the car and check the fastenings regularly. In addition, you
should always remove the battery from your SCOTT pedelec (b) before fas-
tening your SCOTT pedelec outside the car. Stow the battery in its original
cardboard box (c) and, if mounted, a removable display unit, inside the car and
secure it appropriately to avoid any damage during transport. The rechargeable
battery should be tightened with straps. Hazardous goods!
Protect the connections of the rechargeable battery against rain, wetness, mois-
ture and dirt during the journey, for example, with a plastic bag.
CAUTION
The weight distribution on pedelecs differs markedly from the weight distri-
bution on bicycles without drive assistance. A pedelec is markedly heavier
than a bicycle without drive assistance. For this reason parking, pushing,
lifting and carrying the SCOTT pedelec is more difficult. Bear this in mind
when loading your pedelec into a car and unloading it or when mounting it
on a bicycle carrier system.
NOTICE
Before transporting several pedelecs with a roof mounting or a rear mount-
ing carrier system, inform yourself about the maximum load capacity of the
bike carrier and the maximum load of the trailer hitch. Keep in mind that
the weight of a pedelec is higher than the weight of a bicycle without drive.
Maybe you can only transport one or two pedelecs instead of three bicycles
without drive.
ENGLISH 139 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
NOTICE
Make sure to remove all movable and loose parts and above all the re-
chargeable battery, if possible, the control element (d) and the cycle com-
puter on the handlebars before transporting the pedelec inside or outside
the car. If you transport your SCOTT pedelec without its battery on a bike
carrier system, protect the connections against water, moisture and dirt, for
example, with a plastic bag (e).
SAFETY INSTRUCTIONS
If necessary, inform yourself about the laws and regulations concerning
bike/pedelec transport in the countries that you intend to transit during your
journey. The laws and regulations differ, e.g. with regard to the marking.
For more information see the system instructions of your drive manufacturer.
By train / By public transport
SCOTT pedelecs can be transported like conventional bikes by public transport.
CAUTION
If the rechargeable battery of your SCOTT pedelec is mounted to the down
tube or to the pannier rack, you can remove the battery for an easier board-
ing and disembarking (f).
SAFETY INSTRUCTIONS
Observe that every train traveller is normally allowed to take only one
pedelec with him.
Before you start your trip, inform yourself in time about the conditions of
carriage and also observe the regulations and rules about bike and pedelec
transport in the countries through which you intend to travel.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 140
b ca
By plane
If you intend to take your SCOTT pedelec by plane or to dispatch it by a for-
warding agent, you have to observe particular packing and labelling require-
ments for rechargeable batteries which are considered as hazardous goods.
Contact the airline, an expert for hazardous material or the forwarding agent in
time.
SAFETY INSTRUCTIONS
Contact the airline with which you intend to travel in time and inform your-
self about conditions and possibilities of taking your SCOTT pedelec with
you.
GENERAL NOTES ON CARE AND SERVICING
MAINTENANCE AND SERVICING YOUR SCOTT BIKE
Your SCOTT dealer will have assembled and adjusted your SCOTT bike ready
for use when you come to collect it. Nevertheless, your SCOTT bike needs reg-
ular servicing (a). Have your local SCOTT dealer do the scheduled maintenance
work. This is the only way to ensure that all components function safely and
reliably for many kilometres.
The bike will be due for its first service after 100 to 300 kilometres, 5 to 15 hours
of initial use or four to six weeks, at the latest however after three months. The
bedding-in phase typically involves spokes slightly losing tension or gears com-
ing out of adjustment (b), so there is every reason to have your SCOTT dealer
service the SCOTT bike at this stage. This bedding-in process is unavoidable.
Therefore, remember to make an appointment with your SCOTT dealer to have
your new SCOTT bike inspected. This first service is very important for both
functioning and durability of your SCOTT bike.
ENGLISH 141 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
It is advisable to have your SCOTT bike serviced regularly by your SCOTT dealer
after the bedding-in phase, i.e. according to the SCOTT service and mainte-
nance schedule. If you ride a great deal on poor road surfaces or on uneven
ground, it will require correspondingly shorter service periods (see SCOTT ser-
vice plan in the Quick Start Manual). The off-season during the winter months is
a very good time to take your SCOTT bike to your SCOTT dealer for the annual
inspection, as they will have plenty of time for you and for servicing.
The intended use of your SCOTT bike includes regular servicing and the re-
placement of worn out parts in time, e.g. chains, brake pads (c) or bowden
and brake cables (d). This will ensure the safe functioning and therefore has an
influence on the liability for material defects and the warranty.
For more information see the chapter “SCOTT service and maintenance sched-
ule” and the manuals of the component manufacturers.
WARNING
Servicing and repairs are jobs best left to your SCOTT dealer. If you have
your bike serviced by anyone else than an expert, you run the risk that parts
of your SCOTT bike will fail. Risk of accident! When working on your SCOTT
bike, restrict yourself to jobs for which you have the suitable tools, e.g. a
torque wrench (e), and the necessary knowledge.
If a component needs to be replaced, make it a rule to only use original
spare parts (f). Wearing parts of other manufacturers, e.g. brake pads or
tyres that are not of identical dimension, may render your SCOTT bike un-
safe. Risk of accident!
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 142
b ca
CLEANING AND CARING FOR YOUR SCOTT BIKE OR SCOTT
PEDELEC
Dried sweat, dirt and salt from riding during the winter or in sea air can harm
your SCOTT bike. You should therefore make it a habit of cleaning all compo-
nents at regular intervals (a).
Avoid cleaning your bike with a high-pressure cleaner. The high-pressure jet is
likely to enter bearings by passing through the seals and dilute the lubricants
hereby increasing the friction. This destroys and impairs the functioning of
the bearing races in the long term. High-pressure jets are also likely to re-
move frame and rim stickers. The electronics could be damaged in the case of
pedelecs.
A much more gentle way of cleaning your bike is with a low-pressure water jet
or a bucket of water and a sponge or a large brush. Cleaning your bike by hand
has another positive side-effect: you may discover defects in the paint as well as
worn or defective components at an early stage.
Check the chain for wear and relubricate after cleaning and drying (b) (see the
chapter “Bicycle chain” and the manuals of the component manufacturers).
Wipe dry the sliding surfaces of the suspension fork and the rear shock (c) and
apply special spray approved by the manufacturer (d).
Apply a coat of standard hard wax on painted, metal and carbon surfaces
(except from brake surfaces and brake discs). Polish the waxed surfaces after
drying to give them a nice shine.
WARNING
Keep cleaning agents and chain oil clear of the brake pads, brake discs and
rim sides (braking surfaces). Otherwise the brake could fail. Never grease
or lubricate the clamping areas of a frame made of carbon, e.g. handlebars,
stem, seat post and seat tube. Once greased, carbon components may never
again ensure reliable clamping!
ENGLISH 143 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WARNING
While cleaning, watch out for cracks (e), scratches, dents as well as bent or
discoloured material. Have defective components replaced immediately
and touch up paint defects. If you are in doubt or if you have any questions,
contact your SCOTT dealer.
CAUTION
Remove the rechargeable battery or the display before doing any work on
your SCOTT pedelec (e.g. servicing, repairs, assembly, maintenance, work on
your drive etc.). Activating the drive systems unintentionally bears the risk of
injury!
NOTICE
Do not clean your SCOTT bike with a high-pressure cleaner or a water jet
and if you do, be sure to keep it at a distance. Do not aim at the bearings.
Only use petroleum-based solvents for cleaning tough oil or grease stains
from paint and carbon surfaces. Never use degreasing agents containing
acetone, methyl chloride or the like, or solvent-containing, non-neutral or
chemical cleaning agents that could attack the surface!
Keep in mind that the auxiliary drive of your SCOTT pedelec may lead to
partly higher wear than you are used to. This applies in particular to the
brakes and the tyres and in the case of mid-mounted motors to the chain
and the sprockets.
A rechargeable battery that has reached the end of its service life must not
be disposed of with normal household rubbish (f). Bring the rechargeable
battery to the dealer, where you buy your new one. If in doubt, ask your
SCOTT dealer.
Note that in the case of SCOTT speed pedelecs only certain components are
allowed to be replaced to ensure insurance cover. Be sure to only use origi-
nal spare parts.
The use of third Party Bike Shields / Protective Film is prohibited.
SAFETY INSTRUCTIONS
For more information see the system instructions of your drive manufacturer.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 144
b ca
SHELTERING AND STORING YOUR SCOTT BIKE OR SCOTT PEDELEC
If you regularly look after your SCOTT bike during the season (a), you will not
need to take any special measures when storing it for a short time, apart from
securing it against theft. Store your bike in a dry, well aerated place.
If you want to store your SCOTT bike for a longer period of time, e.g. over
the winter months, observe the following things: Inflated inner tubes tend to
gradually lose air when the bike is not used for a long time. If your SCOTT bike
is left standing on flat tyres for an extended period, this can cause damage to
the structure of the tyres. It is therefore better to hang the wheels or the entire
SCOTT bike or to check the tyre pressure regularly (b). Clean your SCOTT bike
and protect it against corrosion. Your SCOTT dealer offers a variety of care
products, such as spray wax etc.
Remove the seat post (c) and let moisture that may have entered dry. Spray a
little finely atomized oil into the metal seat tube. However, do not apply oil in
a carbon seat tube. Shift the gear to the smallest chainring and the smallest
sprocket. This relaxes the cables and the springs.
SAFETY INSTRUCTIONS
There are hardly any waiting times at your SCOTT dealer during the winter
months. In addition, many of the SCOTT dealers offer an annual check-up at
a special price. Benefit from the idle time and ask your SCOTT dealer to do
the scheduled maintenance work!
For more information on the safekeeping and storing of your SCOTT
pedelec see the chapter “Information for proper handling of the rechargea-
ble battery” and the system manual of your drive manufacturer.
ENGLISH 145 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
WHAT TO BEAR IN MIND WHEN SERVICING SCOTT SPEED PEDELECS
Note that in the case of SCOTT speed pedelecs only certain components are al-
lowed to be replaced, otherwise there is the risk of loosing the operating licence
and the insurance cover. Only use spare parts confirmed by experts’ reports on
the approval for your SCOTT speed pedelec. As an alternative you may also go
through an individual approval process by a technical inspection authority of
your country. To be on the safe side, be sure to only use original spare parts.
Components which must not be replaced or only after a type test, e.g. carried
out by a technical inspection authority: Frame, fork, drive unit, battery, tyres,
rims, brake system, front and rear light, kickstand, handlebars, stem, command
console/display (d+e) and licence plate frame.
WARNING
Keep in mind that your SCOTT speed pedelec is a type-approved speed
pedelec. Its assembly must practically remain unchanged.
For further information check the Manual SCOTT S-Pedelec 45 kmh/28mph.
In the case of SCOTT speed pedelecs be sure to only assemble original spare
parts (f), otherwise the operating licence expires.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 146
b ca
Maintenance and care of your SCOTT pedelec motor
The motor, the rechargeable battery and the control element and/or display are
mainly maintenance free, except for the battery charging which is necessary
regularly. From time to time the dirt and oil needs to be cleaned off your chain
with an oily rag (a). Special degreasers are not necessary; they even have a
damaging effect.
Having cleaned the chain as thoroughly as possible, apply chain oil, wax or
grease to the chain links (b). To lubricate the chain, drip the lubricant onto the
rollers of the lower run of the chain while you turn the crank. Once this is done,
turn the cranks a few more times; then let the SCOTT pedelec rest for a few
minutes so that the lubricant can disperse. Finally wipe off excess lubricant with
a rag so that it does not spatter around during riding or can collect road dirt.
NOTICE
A rechargeable battery that has reached the end of its service life must not
be disposed of with normal household rubbish. Bring the rechargeable bat-
tery to the dealer, where you buy your new one. If in doubt, ask your SCOTT
dealer.
The drive is not approved for steam cleaning, high-pressure cleaning or
cleaning with a water hose. The contact of water with the electronics or the
drive can destroy the units. The individual drive components can be cleaned
with a soft rag (c) and neutral detergents. You may use a moist rag, but not
excessive water. Do not submerge the rechargeable battery!
ENGLISH 147 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
ENGLISH
| 148 ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
SCOTT SERVICE AND MAINTENANCE SCHEDULE
It is advisable to have your SCOTT bike serviced regularly after the bedding-in
phase. The schedule given in the table below is a rough guide for cyclists who
ride their bike between 1,000 and 2,000 km or 50 to 100 hours of use a year.
If you consistently ride more or if you ride a great deal on poor road surfaces, the
maintenance periods of the SCOTT service plan will shorten accordingly.
Component What to do Before every Monthly Annually Other
ride intervals
Lighting Check ·
Tyres Check pressure ·
Check tread and side walls ·
Brakes (rim brakes) Check lever travel, wear of brake ·
pads, position of pads relative to
rim; test brakes in stationary
Brakes (hydraulic Check lever travel, wear of brake ·
rim brakes) pads, position of pads relative to
rim; test brakes in stationary
Brakes Lever travel, test brakes ·
(drum/roller) in stationary
Brakes, brake pads Clean ·
(rim brakes)
Brake cables/ Visual inspection ·
lines, pads
Brakes (disc brakes) Check lever travel, wear of ·
brake pads, check seals,
test brakes in stationary
Replace liquid (DOT-liquids) o
Suspension forks Check and retighten bolts, if necessary o
All-inclusive service (change oil) o
Rims (of rim brakes) Check thickness, replace if necessary o after 2nd
set of brake
pads at the
latest
Fork (rigid) Check and replace, if necessary o at least every
two years
Bottom bracket Check for bearing play ·
Dismount and regrease (cups) o
Chain Check and grease, if necessary ·
Check wear, replace, if necessary o after 1,000
Derailleur gears km or 50
hours of use
Telescopic seat post Service ·
Crank Check and retighten, if necessary ·
Painted/anodized/ Polish · every 6
carbon surfaces months at
least
Wheels/spokes Check for trueness and tension ·
True or retighten o if necessary
ENGLISH 149 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
Component What to do Before every Monthly Annually Other
ride intervals
Handlebars and Check and replace, if necessary o every 2
stem (aluminium years at
and carbon) the latest
Headset Check for bearing play ·
Regrease o
Metal Polish (except: rim sides of rim · every 6
surfaces brakes, rotors) months at
least
Hubs Check for bearing play ·
Regrease o
Pedals (all) Check for bearing play ·
Pedals Clean and grease locking mechanism ·
(clipless)
Seat post/stem Check bolts ·
Dismount and re-lubricate, carbon: o
new assembly paste (no grease!)
Front/rear derailleur Clean and grease ·
Quick-releases/ Check seat ·
thru axles
Bolts and nuts Check and retighten, if necessary ·
(Multi-speed hubs,
mudguards etc.)
Valves Check seat ·
Cables gears/brakes Disassemble and regrease o
If you have a certain degree of mechanical skills, experience and suitable tools,
such as a torque wrench, you should be able to do the checks marked · by your-
self. If you come across any defects, take appropriate measures without delay. If
you are in doubt or if you have any questions, contact your SCOTT dealer.
Jobs marked o are best left to your SCOTT dealer.
WARNING
For your own safety, bring your SCOTT bike to your SCOTT dealer for its first
inspection after 100 to 300 kilometres, 5 to 15 hours of initial use or four to
six weeks, and at the very latest after three months.
ENGLISH
| 150 ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
RECOMMENDED TORQUE SETTINGS FOR YOUR SCOTT BIKE
All bolted connections of the bike components have to be tightened carefully and
checked regularly to ensure the safe and reliable operation of the SCOTT bike.
This is best done with a torque wrench that disengages as soon as the desired
torque value has been reached or a click-type torque wrench. Tighten carefully
by approaching the prescribed maximum torque value in small steps (0.5Nm
increments) and check in between the proper fit of the component. Never exceed
the maximum torque value indicated by the manufacturer!
Where no maximum torque setting is given start with 2Nm. Observe the indi-
cated values and observe the values on the components and/or in the manuals
of the component manufacturers.
Component Bolted connections Shimano
1
SRAM/Avid
2
Tektro
3
TRP
4
(Nm) (Nm) (Nm) (Nm)
Rear Mount 8 - 10 8 - 12
derailleur (on frame/derailleur hanger)
Cable clamp 5 - 7 4 - 5
Pulley wheels 3 - 4
Front Mount on frame 5 - 7 3 - 7
derailleur Cable clamp 5 - 7 5 - 7
Shifter Mount on handlebars 5 2 - 5.5
Hole covering 0.3 - 0.5
Brake lever Mount on handlebars 4 - 8 3 - 5.5 6 - 8
unit Time trial brake lever 5 - 7
Hub Quick-release lever 5 - 7.5
Lock nut for bearing adjustment
Of quick-release hubs 10 - 25
Sprocket cluster lock ring 29 - 49 40
Internal Hub axle nut 30 - 45
gear hub
Crank Crank mount
(grease-free square-head)
35 - 50
Crank mount (Shimano Octalink) 35 - 50
Crank mount
(Shimano Hollowtech II) 12 - 14
Crank mount (Isis) 31 - 34
Crank mount (Giga X Pipe) 48 - 54
Chainwheel mount 10 - 17 8 - 12
Sealed Shell (square-head) 49 - 69
cartridge Shell (Shimano Hollowtech II, 35 - 50
bearing SRAM Giga X Pipe) 34 - 41
Shimano Octalink 50 - 70
Pedal Pedal axle 35
Shoe Cleat 5 - 6
Spike 4
Brake Cable clamp 6 - 8 6 - 8 6 - 8 6 - 8
(V-brake) Brake shoe mount 6 - 8 6 - 8 6 - 8 6 - 8
Brake pad fixing 1 - 2
Brake boss frame/fork 8 - 10
1 www.shimano.com 2 www.sram.com 3 www.tektro.com 4 www.trpbrakes.com
ENGLISH 151 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
These values are reference values of the above-mentioned component manu-
facturers. Be sure to observe the values in the manuals of the component manu-
facturers. These values do not apply to the components of other manufacturers.
WARNING
Some components have the maximum permissible torque values printed on
them. Use a torque wrench and never exceed the maximum torque value! If
you are in doubt or if you have any questions, contact your SCOTT dealer.
NOTICE
Due to the unmanageable number of components on the market, SCOTT is
not in a position to foresee every product that will be replaced or newly as-
sembled by third parties. Therefore SCOTT denies any liability for such kind
of additions or modifications with regard to compatibility, torque values etc.
Whoever assembles or modifies the SCOTT bike shall ensure that the SCOTT
bike is assembled according to the state of the art in science and technolo-
gy.
ENGLISH
| 152 ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
RECOMMENDED TORQUE SETTINGS FOR DISC BRAKES AND
HYDRAULIC RIM BRAKES ON YOUR SCOTT BIKE
Component Shimano
1
SRAM/Avid
2
Tektro
3
TRP
4
Magura HS
5
(Nm) (Nm) (Nm) (Nm) (Nm)
Brake calliper mount 6 - 8 9.5 6 - 8 6 - 8 6
on frame/fork
Brake lever unit on handlebars
- Single-bolt clamp 4 - 8 3 - 5.5 5 - 7 3 - 5 4
- Two-bolt clamp 3
Union screws of cable 5 - 7 5 4
at grip and normal cable
at brake calliper
Brake cable connector at 5 - 7 5 5 - 6 3
brake calliper (disc tube cable)
Expansion tank cap 0.3 - 0.5
Bleeding device brake calliper 4 - 6 4 - 6 4
Bleeding device brake lever 0.5 - 1 0.5
Brake disc fixing 4 6.2 4 - 6 4 - 6 4
(6-holes)
Brake disc fixing 40 40
(centerlock)
Hose (union nut) direct connection 4
Slave cylinder (bleeder screw) 4
Brake pad retainer at brake calliper 2 - 4 1 3 - 5 2.5
Cable clamp at brake calliper 6 - 8 6 - 8 6 - 8
1 www.shimano.com 2 www.sram.com 3 www.tektro.com 4 www.trpbrakes.com
5 www.magura.com
These values are reference values of the above-mentioned component manu-
facturers. Be sure to observe the values in the manuals of the component manu-
facturers. These values do not apply to the components of other manufacturers.
WARNING
Some components have the maximum permissible torque values printed on
them. Use a torque wrench and never exceed the maximum torque value! If
you are in doubt or if you have any questions, contact your SCOTT dealer.
NOTICE
Due to the unmanageable number of components on the market, SCOTT is
not in a position to foresee every product that will be replaced or newly as-
sembled by third parties. Therefore SCOTT denies any liability for such kind
of additions or modifications with regard to compatibility, torque values etc.
Whoever assembles or modifies the SCOTT bike shall ensure that the bike
was assembled according to the state-of-the-art in science and technology.
ENGLISH 153 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
LEGAL REQUIREMENTS FOR RIDING ON PUBLIC ROADS
If you want to use your SCOTT bike for riding on public roads (d), it has to be
equipped according to the regulations of the respective country.
Pay particular attention to your SCOTT bike being equipped with the prescribed
lighting (e) and reflectors (f).
Ask your SCOTT dealer to inform you about the road traffic regulations in force
in your country. Make yourself familiar with the road traffic regulations for riding
on public roads and off-road.
WARNING
For your own safety, be sure to switch on the light as soon as dusk sets in.
Keep the lighting set clean and check its functioning at regular intervals.
SAFETY INSTRUCTIONS
When riding on public roads cyclists must in general observe the same regu-
lations as car drivers. Make yourself familiar with the road traffic regulations
of your country.
You find more important tips for riding in chapter “Safety and behaviour.
ENGLISH ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
| 154
b ca
WARRANTY AND GUARANTEE
Your SCOTT bike was manufactured with great care. Normally it is delivered to
you by your SCOTT dealer fully assembled.
As direct purchaser you have full warranty rights within the first two years after
purchase. Contact your SCOTT dealer in the event of defects.
To ensure a smooth handling of your claim, it is necessary to present your
receipt, your SCOTT handover report in the Quick Start Manual and the proofs
of the service plan in the Quick Start Manual. Therefore, be sure to keep these
documents in a safe place.
To ensure a long service life and good durability of your SCOTT bike, use it
only for its intended purpose (see the chapter “Intended use of your SCOTT
bike“ and the SCOTT handover report in the Quick Start Manual). Observe the
permissible load specifications as specified on the SCOTT handover report in
the Quick Start Manual. Be sure to follow the mounting instructions of the man-
ufacturers (above all, the torque values of the bolts) as well as the prescribed
maintenance schedule.
Observe the checks and routines listed in this owner’s manual or in any other
manuals enclosed with this delivery (see the chapter “SCOTT service and main-
tenance schedule”) as well as any instructions concerning the replacement of
safety-relevant components such as handlebars or brakes etc.
WARNING
Keep in mind that retrofitted accessories can impair the functioning of your
SCOTT bike. If you are in doubt or if you have any questions, contact your
SCOTT dealer.
SAFETY INSTRUCTIONS
The law referring to full warranty rights is only valid in the countries where
the law has been ratified according to the renewed European regulations.
Inform yourself about the situation in your country.
ENGLISH 155 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
e fd
NOTES ON WEARING PARTS
Some components of your SCOTT bike are subject to wear due to their function
(a+b). The rate of wear will depend on care and maintenance and the way you
use your SCOTT bike (mileage, riding in the rain, dirt, salt etc.). SCOTT bikes
that are often left standing in the open may also be subject to increased wear
through weathering.
The components below require regular care (c+d) and maintenance. The follow-
ing parts which have reached their limit of wear must be replaced:
Drive chain
Brake pads
Brake fluid (DOT)
Brake discs/rotors (e)
Brake cables
Brake cable housings
Seals of suspension elements
Rim sides (of rim brakes) (f)
Rubber grips
Hydraulic oil
Chainwheels
Chainstay protection
Bearings in hubs, joints etc.
LED
Handlebar tape
Lamps
Tyres
Sprockets
Saddle covering / saddle
Pulleys
Bowden cables
Cable housings
Inner tubes
Lubricants
ENGLISH
| 156 ORIGINAL OPERATING INSTRUCTIONS 2021 | TREKKING AND TREKKING-PEDELEC
SCOTT WARRANTY
Bike limited warranty
What is covered?
This warranty covers defects in materials and workmanship at the time of
transfer of risks in frames, swingarms and forks (provided it is a fork of Scott) on
SCOTT branded bikes sold completely assembled by SCOTT or an authorized
SCOTT dealer (“Product”).
How long does coverage last?
This voluntary manufacturer’s warranty is limited to five years for frames and
swingarms, respectively two years for forks, from the date of purchase of the
Product and is limited to the first purchaser of the Product and subject to the
prior registration of your Scott-bike on www.scott-sports.com within 10 days
as od the date of purchase. Transfer of the Product from the first purchaser to
another person terminates this limited warranty.
A claim that has been accepted under the Voluntary Manufacturer’s Warranty
does not then prolong the Voluntary Manufacture’s Warranty.
The limited warranty of five years for the frames and swingarms shall only be
granted in case once a year a maintenance service has been effected according
to maintenance requirements as set forth in the manual. The effected annual
maintenance service shall be confirmed by stamp and signature. In case such
an annual maintenance service has not been effected the warranty of five years
for the frame shall be reduced to three years. Costs for maintenance and service
have to be borne by the owner of the Product.
On Gambler, Voltage Fr and Volt-X the warranty period is limited to two years.
Repaired or replaced Products are covered for the remainder of the original
warranty period and subject to the conditions outlined in the original warranty,
to the extent permitted by law.
Hereby SCOTT grants a worldwide voluntarily manufacturer’s warranty. To the
extent permitted by law and unless a shorter duration is stipulated by law, any
warranties implied by law are limited in duration to maximum five, respectively
two years, from the date of purchase of the Product and are limited to the first
purchaser of the Product.
What will SCOTT do in the event of a guarantee case?
SCOTT will replace the defective product with a product of a quality or nature
and similar level, will repair or refund the purchase price (after presentation of
the proof of purchase of the product), in its sole discretion. Non-defective com-
ponents are replaced at your expense. In such a case, we will contact you before
replacing the non-defective part for your agreement.
ENGLISH 157 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2021
What does this limited warranty not cover?
This limited warranty does not cover defects which did not exist before the
transfer of risks. This limited warranty does not cover Products used in rental
operations. This limited warranty does not cover purchases of not completely
assembled bikes. This limited warranty does not cover any defect caused by
“wear and tear” (a complete list of all parts of “wear and tear” can be found in
the manual), accident, neglect, improper handling, colour fade due to exposure
to sunlight, abuse, misuse, an act of God, improper assembly, non-compliance
with recommended maintenance and care procedures, improper or incorrectly
performed maintenance or repairs performed by someone other than an au-
thorized SCOTT dealer, use of parts or devices not consistent with the Product,
and alteration of the Product. All Products come with a manual; please carefully
follow the instructions located there or affixed elsewhere to the Product. To the
extent permitted by law, consequential and incidental damages are not recover-
able under this limited warranty.
How do you make a claim under this limited warranty?
To make a claim under this limited warranty, you must notify SCOTT of the
claimed defect within the warranty period and timely return the Product to
SCOTT at your expense for inspection. Please contact your authorized SCOTT
dealer, call SCOTTs customer service or the national SCOTT distributor (dealer
locator: www.scott-sports.com). All returned Products must be accompanied
by proof of purchase (receipt) from an authorized SCOTT dealer or this limit-
ed warranty will not apply. In case of replacement or refund, returned Product
becomes the property of SCOTT.
A protocol for the handing over of the Product (which you will find at the end
of the manual) will remain in copy at the SCOTT dealer after acceptance and
signature of the consumer. It is obligatory to show this protocol of handing over
together with the defective part in case of a warranty claim given that it pro-
vides evidence of purchase or this limited warranty will not apply.
How do state laws affect your rights under this limited warranty?
This limited warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.
Recommendation
We strongly recommend that you use only authorized SCOTT dealers for yearly
maintenance services and for repairs, as improper or incorrectly performed
maintenance or repairs voids this limited warranty. Costs for maintenance ser-
vice have to be borne by the consumer.
All rights reserved ©2020 SCOTT Sports SA
Distribution: SSG (Europe) Distribution Center SA
P.E.D Zone C1, Rue Du Kiell 60 | 6790 Aubange | Belgium
WWW.SCOTT-SPORTS.COM
SCOTT Sports SA
Route du Crochet 1 1, CH–1762 Givisiez
Phone: +41 26 460 16 16 | Fax: +41 26 460 16 00
Email: webmaster.marketing@scott-sports.com
V8.1/10072020
150


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Trekking E-Bike 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Trekking E-Bike 2021 in the language / languages: English as an attachment in your email.

The manual is 28.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Trekking E-Bike 2021

Scott Trekking E-Bike 2021 User Manual - German - 163 pages

Scott Trekking E-Bike 2021 User Manual - French - 159 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info