664144
19
Zoom out
Zoom in
Previous page
1/80
Next page
ENGLISHENGLISH
37 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2017ORIGINAL OPERATING INSTRUCTIONS 2017 | TREKKING AND TREKKING-PEDELEC
| 36
Align the saddle with the frame by using the saddle nose and the bottom
bracket or top tube as a reference point (d). Clamp the seat post tight again by
closing the quick-release, as described in chapter “Using quick-releases” or by
turning the seat post binder bolts clockwise in half turns or better in steps of 0.5
Nm increments starting at 3 Nm. You should not need much strength in your
hands to clamp the seat post sufficiently tight. Otherwise the seat post does not
match the frame.
Verify in between that the seat post is sufficiently tight by taking hold of the
saddle at both ends and then trying to rotate the seat post inside the seat tube
(e). If it does rotate, gently retighten the binder bolt of the seat post clamp by
half a turn or better by a quater turn or in steps of 0.5 Nm increments and do
the check again.
Does the leg stretch test now produce the correct result? Check by moving your
foot and pedal to the lowest point. When the ball of your foot is exactly above
the pedal center in the ideal pedaling position, your knee should be slightly
bent. If this is the case, the saddle height is adjusted to the correct height.
Check whether you can touch the ground safely while sitting on the saddle by
stretching your feet to the floor. If not, you should lower the saddle until you
can, at least to begin with.
DANGER!
G
Never apply grease or oil into a seat tube of a frame made of carbon unless
an alloy sleeve is inside the frame. If you mount a carbon seat post, do not
put any grease on it, even if the frame is made of metal. Once greased, carbon
components may never again ensure reliable clamping! Use special carbon
assembly paste instead (f).
DANGER!
G
Make sure not to overtighten the binder bolt of the seat post clamp. Other-
wise you may damage the seat post or the frame. Risk of accident!
NOTE!
I
The seating position depends highly on how you want to use the SCOTT
bike. Ask your SCOTT dealer or your trainer for help. The advice given be-
low is suitable for typical SCOTT city, trekking and urban bikes.
NOTE!
I
If sitting on the saddle causes you trouble, e.g. because it numbs your
crotch, this may be due to the saddle. Your SCOTT dealer has a very wide
range of saddles available and will be pleased to advise you.
ADJUSTMENT OF THE SADDLE TO THE CORRECT HEIGHT
The correct saddle height depends on the length of your legs. When pedalling,
the ball of your foot should be positioned above the center of the pedal axle.
With your feet in this position you should not be able to stretch your legs com-
pletely straight at the lowest point (a), otherwise your pedalling will become
awkward.
Check the height of your saddle with flat-soled shoes. This is best done with
suitable cycling shoes.
Sit on the saddle and put your heel on the pedal at its lowest point. Your leg
should be fully stretched and your hips should remain horizontal.
To adjust the saddle height loosen the quick-release lever (see the chapter “Us-
ing quick-releases“) or the binder bolt of the seat post clamp at the top of the
seat tube (b).
The latter requires suitable tools, e.g. an Allen key, with which you turn the bolt
two to three turns anticlockwise. Now you can perform the vertical adjustment
of the seat post.
Be sure not to pull out the seat post too far. The mark on the seat post (max.,
min., stop or the like) should always remain within the seat tube (c). Always
grease the surface of an aluminium or titanium seat post that is inserted into a
seat tube made of aluminium, titanium or steel. Do not grease carbon seat posts
and/or carbon seat tubes in the clamping area! Use special carbon assembly
paste instead.
b ca e fd
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Trekking - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Trekking - 2017 in the language / languages: English as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Trekking - 2017

Scott Trekking - 2017 User Manual - German - 81 pages

Scott Trekking - 2017 User Manual - French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info