664166

Scott Trekking - 2016 Manual

23
Zoom out
Zoom in
Previous page
1/80
Next page
ENGLISHENGLISH
45 |
TREKKING AND TREKKING-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2017ORIGINAL OPERATING INSTRUCTIONS 2017 | TREKKING AND TREKKING-PEDELEC
| 44
NOTE!
I
The manufacturers of saddles deliver their products with detailed manuals.
You find these manuals on this SCOTT info CD. Read them carefully before
adjusting the position of your saddle. If you are in doubt or if you have any ques-
tions, contact your SCOTT dealer.
Adjustment of saddle position and tilt
With patent seat posts (d) one or two bolts fix the clamping mechanism, which
controls the tilt and the horizontal position of the saddle. Some seat posts have
two bolts side-by-side.
Release the bolt(s) at the top of the seat post. Release the bolt(s) two to three
turns anticlockwise at the most, otherwise the whole assembly can come apart.
Move the saddle forth or back, as desired. You may have to give the saddle a
light blow to make it move.
Observe the markings on the saddle rail. Make sure the seat of the saddle re-
mains horizontal (e) as you retighten the bolt(s). Your SCOTT bike should stand
on level ground while you adjust the saddle.
Having found your preferred position, make sure both clamp halves fit snugly
around the saddle rails before tightening the bolt(s) to the correct torque value
as prescribed by the seat post manufacturer.
Retighten the bolt(s) with a torque wrench according to the manuals of the
manufacturer. After fastening the saddle, check whether it resists tilting by
bringing your weight to bear on it once with your hands at either end of the
saddle (f).
DANGER!
G
Poorly tightened or loosening bolts can fail. Risk of accident!
DANGER!
G
Check the bolts by using a torque wrench once a month according to the
values indicated directly on the components and/or in the manuals of the
component manufacturers on this SCOTT info CD.
Saddle adjustment – fore-to-aft position and horizontal tilt
The inclination of your upper body (a), and hence your riding comfort and
pedalling power, are also influenced by the distance between the grips of the
handlebars and the saddle. This distance can be altered slightly by changing the
position of the saddle rails in the seat post clamp. However, this also influences
your pedaling. Whether the saddle is positioned more to the front or to the back
of the bike will alter how rearward the pedalling position of your legs is.
Make sure the saddle is clamped within the range of the marking on the saddle
rail, i.e. on the straight part of the rail, never in the curved sections.
You need to have the saddle horizontal in order to pedal in a relaxed manner.
If it is tilted, you will constantly have to lean against the handlebars to prevent
yourself from slipping off the saddle.
DANGER!
G
The bolted connections of the seat post have to be tightened to the pre-
scribed torque values (b). Use a torque wrench and never exceed the max-
imum torque values! You will find the prescribed values in the chapter “Recom-
mended torque settings for your SCOTT bike”, directly on the components and/
or in the manuals of the component manufacturers on this SCOTT info CD.
DANGER!
G
Make sure the saddle is clamped within the range of the marking on the
saddle rail and not in the curved section of the saddle rails (c). Otherwise
the saddle rail can fail! Check the bolts by using a torque wrench once a month
according to the prescribed values.
DANGER!
G
The setting range of the saddle is very small. Replacing the stem allows you
to make far bigger adjustments to the rider’s fore-to-aft position, as stems
come in different lengths. In doing so you may achieve differences of more than
ten centimetres. In this case you usually would have to adjust the length of the
cables – a job best left to your SCOTT dealer!
b ca e fd
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Trekking - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Trekking - 2016 in the language / languages: English as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Trekking - 2016

Scott Trekking - 2016 User Manual - German - 81 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info