664137
11
Zoom out
Zoom in
Previous page
1/15
Next page
SPARK 2014
Tim, 21-Jan-13
User Manual: new points
FD-MOUNT Identification Spark 700 and 900
Spark 900 new FD
adaptor for MY14
Spark 700
NOTE:
Colours in pictures are not representitive of reality
New Spark 900 FD adaptor is not compatible with old Spark 12 CST because some FDs will touch
CST when assembled.
New FD mounts for both Spark 700 and 900.
Some customers complained of shifting problems, so for Spark 900, FD adaptor was changed (from Spark 12) to lower FD by
1mm to be the same as Shimano specs.
Spark 900 FD adaptor can be identified by ID mark 900 and colour is now anodised grey rather than black.
SPARK 2014
Tim, 21-Jan-13
User Manual: new points
FD-MOUNT Identification Spark 700 and 900
Spark 900 new FD
adaptor for MY14
Spark 700
NOTE:
Colours in pictures are not representitive of reality
New Spark 900 FD adaptor is not compatible with old Spark 12 CST because some FDs will touch
CST when assembled.
New FD mounts for both Spark 700 and 900.
Some customers complained of shifting problems, so for Spark 900, FD adaptor was changed (from Spark 12) to lower FD by
1mm to be the same as Shimano specs.
Spark 900 FD adaptor can be identified by ID mark 900 and colour is now anodised grey rather than black.
ENGLISHENGLISH
On Spark bikes equipped with the FOX Nude 3/FOX Float CTD shock you can adjust
the BB height above ground in 2 positions by flipping a geometry chip located on the
linkage bar shock mount.
Please note the max.
tightening torque of
10Nm (88 in/lbs)
1. low BB for lower center of gravity over ground, slacker head angle
2. high BB for bigger clearance between pedals/crankset and obstacles on the
ground, steeper head angle
SPARK 700 SPARK 900
LOW POSITION
HEAD ANGLE 68.3° 69.
BB HEIGHT 330mm 317mm
HIGH POSITION
HEAD ANGLE 68.8° 70°
BB HEIGHT 336mm 323mm
ADJUSTABLE BB HEIGHT
IMPORTANT!
It is not possible to use this geometry chip with other shock models than the FOX
Nude /FOX Float CTD. The shock might collide with parts of the frame or linkage bar.
Models originally equipped with another shock than the FOX Nude /FOX Float CTD
will have a chip with a centered shock bolt hole.
On all Spark frames you will
find a Shimano E-type front
derailleur but fixed directly on
the swingarm without the plate
that is fixed normally between
the bottom bracket bearing
cup and the bottom bracket
housing of the front triangle
or a SRAM Direct Mount
Type S3 FD.
Please note that you always
need to use the adapter plate
attached to the bike or frame
set between chainstay and
front derailleur.
This adapter can be ordered at the SCOTT distribution with parts number:
235276 FD mount plate Set Spark 700 2014
235278 FD mount plate Set Spark 900 2014
The FD-adapter plates of Spark 700 and 900 series are NOT interchangeable
FRONT DERAILLEUR (FD) MOUNTING DETAILS
21 |
BIKE USER MANUAL | SPARKSPARK | BIKE USER MANUAL
| 20
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Spark - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Spark - 2017 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Spark - 2017

Scott Spark - 2017 User Manual - German - 10 pages

Scott Spark - 2017 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info