664159
8
Zoom out
Zoom in
Previous page
1/15
Next page
ENGLISHENGLISH
BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF
FOX CTD SHOCK
SET-UP SPARK WITH FOX NUDE SHOCK
The assembly of the remote cable and the setup of the FOX CTD rear shock is very
similar to the abovementioned assembly and setup of the FOX Nude.
For more details on the FOX CTD please follow the details shown in the manuals of
FOX attached to this bike
RECOMMENDED TOOLS FOR THE SHOCK SET-UP
For the set-up of the shock we recommend to use a shock pump with a scale up
to 20 bars/300 psi with a special air valve connector preventing from air getting
away while removing the pump from the shock valve, this will result in an exact air
pressure.
The Set-Up of the FOX Nude or FOX CTD Shock can be easy done within a few
minutes.
IMPORTANT!
For all adjustments of the air spring the remote lever has to be in position “alltravel
To adjust the air pressure of the air chamber of the FOX Nude or FOX CTD Shock
please refer to the following instruction:
1. Remove the valve cap of the valve (S5) located on the shock housing (S3).
2. Mount the shock pump with its adaptor on the valve
3. Please take into account that it takes some air pressure from inside the shock to
drive the indicator on the pump. Make sure to balance at least this air loss when
you make a check of the air pressure of the shock. Pls also note that the indicators
of shock pumps have a tolerance of max. 10%
4. Please use the FOX iRD App available at the iTunes App store with following link:
https://itunes.apple.com/us/app/fox-intelligent-ride-dynamics/
id549035102?mt=8&ign-mpt=uo%3D4)
5. After downloading the app on your mobile gear please follow the steps shown in
the app and inflate the shock according to the air pressure indicated.When you
reached the needed pressure remove the pump and put the valve cap on the valve
Please note that air will flow into the hose and indicator when counterchecking the
air pressure, so you have to set up again the recommended pressure after this action.
Make sure to balance at least this air loss when you make a check of the air pressure
of the shock. Please also note that the indicators of shock pumps have a tolerance of
max. 10%.
15 |
BIKE USER MANUAL | SPARKSPARK | BIKE USER MANUAL
| 14
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Spark - 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Spark - 2016 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Spark - 2016

Scott Spark - 2016 User Manual - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info