779967
4
Zoom out
Zoom in
Previous page
1/9
Next page
ENGLISHENGLISH
IMPORTANT!
SCOTT Scale 3 is designed around the BOOST platform so many of the fitted parts: cranks/
wheels/dropouts/forks differ from traditional cycle parts. Always consult your authorized
SCOTT dealer for advice on replacing or repairing any part of your SCOTT bike!
RIDELOC
This section refers to SCOTT bikes fitted with the RIDELOC system. For all non-RIDELOC
systems please refer to the specific fork manual for your setup.
The RIDELOC system offers the rider full control of all 3 modes of the front forks with a
single lever, the position and function of the RIDELOC lever make for effortless control over
the forks function.
The 3 basic functions of RIDELOC system are:
-Climb-out Mode
-Traction Mode
-Descent Mode
There are 3 positions of the RIDELOC remote lever.
1. CLIMB MODE: The fork is nearly locked; climbing on asphalt roads is now possible with
little power loss. A simultaneous blow-off-system prevents the forks being damaged in
case the rider does not open the system while crossing obstacles.
2. TRACTION MODE: Altering the dampening of the forks will result in climbing with reduced
“bobbing” and still offers optimum control of the front wheel.
3. DESCENT MODE: Full travel of the fork.
You can only assemble the “standard” RIDELOC remote lever in “left side upward position”
on the handlebar (this is usually fitted on bikes with x2 front chainrings).
On bikes with X1 chainring on the front the under bar RIDELOC remote lever in “left side
downward” position can be fitted as standard.
It is possible to change the RIDELOC lever to the underbar option if the bikes gears have
been changed to X1 system, a new alternative lever will be required for this adjustment;
please consult your local SCOTT dealer for more information on obtaining the correct lever
for your bike.
You will find the following positions on the remote lever:
BASIC SET-UP OF FORKS
Recommended tools for the shock setup:
-The SAG tool that came with your bike. *Fox forks only
-A shock pump with a special air valve connector (not supplied with this bike), this will
help stop air from escaping while removing the pump from the shock valve.
Please note that air will flow into the hose and indicator when counterchecking the air
pressure, this will give the appearance that the shock has less air pressure than it was setup,
your shock may need to be adjusted once this action is made.
Please also note that the indicators of shock pumps have a tolerance of max. 10%.
For bikes spec’d with Fox forks:
You can find more specific information about Fox set
up on Fox’s website, please use your fork ID number
to find more useful setup tips for your exact fork
(visit: ridefox.com)
07 |
BIKE USER MANUAL | SCALESCALE | BIKE USER MANUAL
| 06
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Scale - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Scale - 2018 in the language / languages: English as an attachment in your email.

The manual is 0.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Scale - 2018

Scott Scale - 2018 User Manual - German - 9 pages

Scott Scale - 2018 User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info