664135
7
Zoom out
Zoom in
Previous page
1/12
Next page
ENGLISHENGLISH
CABLE GUIDES AND CABLING.
On the carbon SCOTT Scale the cable guides on the headtube can be changed if required
so different cable configurations can be used, the inside of the cable guide is stamped with a
number or numbers, these numbers dictate what cables can be used, these are the same for
left and right.
The numbers indicate what cables fit the guide; the guide shown will hold 2 mechanical
cables and one hydraulic.
They are available in the following combinations and are available from your SCOTT dealer.
4 = mechanical cable
5 = hydraulic cables
DI2 = DI2
Blank= no cable
Combinations:
4, 4-5-5,
5, 4-4-5,
4-4, DI2,
4-5, 4-DI2,
5-5, 5-DI2,
4-5-DI2
These cable guides are fitted with a single bolt, the fixing torque of this must not exceed
0.75-1 N/M.
With the many different cabling options it is possible to customise the cable routing slightly
depending what components you wish to run, it is recommended that handlebar cables
that come from the right hand side enter the frame on the left, and handlebar cables that
come from the left hand side enter the frame on the right, while this is not crucial to the
performance of the bike it may help to prevent any cable rub
Below is an example of a bike set up “European style” with a 1X set up and a dropper seatpost.
Please note that below is an example and that your bikes brakes need to be set up as per
the law in your country, please check with your local SCOTT dealer for this information.
BB STANDARDS/FD MOUNTING DETAILS
The SCOTT Scale has a Press fit PF92 bottom bracket with an inner diameter of 41mm, this
is a press fit system and special tools are required for removal and refitting, please contact
your SCOTT dealer for assistance.
The SCOTT Scale (non RC models) uses a high direct mount side swing front derailleur only,
this must be used with the use of an FD adaptor plate.
It is not possible to mount a front derailleur to RC frames/bikes.
ADJUSTMENT
We recommend all adjustments are carried out by your local authorized SCOTT dealer but
basic maintenance and checks should be done regularly before each ride as described in the
general manual that was supplied with your bike.
Please pay attention to all instructions and torque settings, if you have any doubts please
contact your dealer,
*in addition to the torque settings please note all bikes with a dropper type seatpost have a
seatpost clamp maximum torque of 5 N/M.
13 |
BIKE USER MANUAL | SCALESCALE | BIKE USER MANUAL
| 12
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Scale - 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Scale - 2017 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Scale - 2017

Scott Scale - 2017 User Manual - German - 12 pages

Scott Scale - 2017 User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info