779956
47
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISHENGLISH 93 |
ROAD BIKE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | ROAD BIKE
| 92
DANGER!
G
Bear in mind that by overtightening the bolts the stem can crush the steer-
er tube. In particular forks with carbon steerer tubes are highly sensitive to
overtightening the steerer tube clamping at the stem. Risk of breakage! Make
sure the clamping area is absolutely free of grease when any of the clamping
faces is made of carbon. If necessary, use carbon assembly paste in the clamp-
ing areas to ensure maximum clamping.
DANGER!
G
Check the secure seat of the stem by taking the front wheel between your
legs and trying to turn the handlebars and stem relative to the wheel (e). A
loose stem can cause an accident.
DANGER!
G
Never change the preloading mechanism in the inside of the fork steerer
tube. Never install a star nut in carbon fork steerer tubes.
CAUTION!
A
Do not overtighten the upper bolt, it only serves to adjust the headset play.
NOTE!
I
If you do not succeed in adjusting the headset, this can have several rea-
sons. If you are not absolutely sure, ask your SCOTT dealer for help.
LIGHTING OF YOUR SCOTT BIKE
For riding on public roads a functioning lighting set (f) is obligatory (see the
chapter “Legal requirements for riding on public roads”).
To check whether the headset runs smoothly, lift the frame up until the front
wheel no longer touches the ground. The handlebars should turn from far left to
far right without feeling roughness or tightness at any point. With a gentle tap
on the handlebars the fork should turn easily from the middle position (a).
If you face any problems during the test, contact your SCOTT dealer.
DANGER!
G
Adjusting the headset requires a certain amount of experience and should
therefore be left to your SCOTT dealer.
THREADLESS HEADSET – AHEADSET®
The distinct feature of this system is that the stem does not sit within the fork
steerer tube, but rather slips over the fork steerer tube, which in this case is
threadless. The stem is thus an important part of the headset, as the stem
clamping fixes the adjustment. You generally only need one or two Allen keys
and a torque wrench to adjust an Aheadset®.
Release the clamping bolt(s) located on the side of the stem by one to two turns
(b). Gently tighten the countersunk adjusting bolt on top a little, e.g. by a quar-
ter turn (c), using an Allen key.
Realign the stem to ensure that the handlebars are at right angle to the wheel.
Make sure the front wheel is in line with the top tube and the stem. Tighten the
clamping bolts of the stem. Use a torque wrench and never exceed the maxi-
mum torque values! You will find the prescribed values in the chapter “Recom-
mended torque settings for your SCOTT bike”, directly on the components and/
or in the manuals of the component manufacturers on this SCOTT info CD.
Check the headset for play as described above (d). Do not overtighten the
headset. Risk of headset failure!
b ca e fd
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Road Bikes 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Road Bikes 2018 in the language / languages: English as an attachment in your email.

The manual is 3.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Road Bikes 2018

Scott Road Bikes 2018 User Manual - German - 65 pages

Scott Road Bikes 2018 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info