779956
43
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISHENGLISH 85 |
ROAD BIKE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | ROAD BIKE
| 84
If you have disc brakes, check before mounting the wheel whether the brake
pads rest snugly in their seats in the brake calliper body. The gaps between the
brake pads and the wheel should be parallel and the wear indicators in their cor-
rect position. Make sure you guide the rotor carefully between the brake pads.
After mounting the wheel and tightening the quick-release pull the brake lever
(several times, if you have disc brakes).
All brakes:
After mounting the wheel and tightening the quick-release pull the brake lever
(e) (several times, if you have disc brakes).
Lift your SCOTT bike off the ground and spin the wheel with your hand. With
the wheel spinning the rotor should not drag along the brake calliper or the
brake pads and the rim should keep off the (rim) brake pads.
DANGER!
G
If you have rim brakes, make sure you hook up the brake cable immediately
after the wheel mounting!
DANGER!
G
Before setting off again check that the brake surfaces and/or rotors are still
free of grease or other lubricants after the wheel mounting (f).
DANGER!
G
Check whether the brake pads hit the rotors or brake surfaces of the rims.
Make sure the wheel is properly seated and firmly fixed in the drop-outs. Al-
ways do a brake test as described in the chapter “Tests before every ride“.
NOTE!
i
When mounting a tyre on a rim that has already been used, it may be
necessary to carefully remove glue residues and dirt with emery cloth. Be
careful not to damage the carbon material. When you are done, wipe the rim
with a soft cloth and acetone.
NOTE!
I
Before removing a wheel, read the chapters “Wheels and tyres” and “Using
quick-releases and thru axles”.
NOTE!
I
If your bike has carbon rims, you have to use special tubular tyre glue (e.g.
from Continental). Be sure to read the manual of the manufacturer of tubu-
lar tyre glue for carbon rims on this SCOTT info CD before applying it.
NOTE!
I
See the video on how to properly glue Continental tubular tyres at
www.conti-online.com
REMOUNTING THE WHEEL
Mounting the wheel is done in the reverse order of dismounting. If necessary,
insert the brake discs between the brake pads. Make sure the wheel is correctly
seated in the drop-outs and accurately centred between the fork legs or the
seat and chainstays. Make sure the quick-release and the drop-out safety tabs
are correctly seated. For more information see the chapter “Using quick-releas-
es and thru axles”.
Close the quick-release lever at the brake (Shimano, SRAM) (a) or shift the pin
in the brake lever/shifter unit on the handlebars (Campagnolo) (b).
If you have cantilever (c) and V-brakes (d) hook up the brake cable at the brake
arm. To do this, grip the rim with one hand and press the brake pads and/or
the brake arms together. In this position the usually barrel shaped nipple or the
outer cable can easily be engaged.
b ca e fd
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Road Bikes 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Road Bikes 2018 in the language / languages: English as an attachment in your email.

The manual is 3.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Road Bikes 2018

Scott Road Bikes 2018 User Manual - German - 65 pages

Scott Road Bikes 2018 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info