779956
17
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISHENGLISH 33 |
ROAD BIKE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | ROAD BIKE
| 32
Stems for threadless systems – Aheadset®
In the case of SCOTT bikes with Aheadset® headsets the stem also serves to
adjust the bearing preload. If you change the position of the stem, you have to
readjust the bearing play (see the chapter “The headset on the SCOTT bike” and
the manuals of the component manufacturers on this SCOTT info CD).
The vertical setting range is determined by the intermediate rings, also referred
to as spacers (b). In the case of flip-flop stem models the stem can be mounted
the other way round (c) to achieve a different handlebar height.
For modifications unscrew the bolt at the top of the fork steerer tube which
serves to adjust the initial bearing pressure, remove the Ahead cap and release
the bolts on either side of the stem by up to three turns (d). Remove stem and
spacers from the fork steerer tube. In doing so keep hold of both frame and
fork to prevent the fork from slipping off the head tube. You can determine the
handlebar height by the arrangement of stem and spacers. Slip the remaining
spacers onto the fork steerer tube above the stem. Adjust the headset, as de-
scribed in the chapter “The headset on the SCOTT bike“.
If you want to turn the stem around, you have to also release the bolts of the
faceplate securing the handlebars (e). If the stem is fitted with a cap, you can
simply take out the handlebars at this point. If it is not fitted with a cap, you have
to remove the handlebar fittings.
Mount the handlebars and, if necessary, the handlebar fittings, as described in
the chapter “Adjustment of handlebar tilt and brake lever/shifter units on SCOTT
road bikes and SCOTT cyclo-cross bikes” and/or in the manuals of the compo-
nent manufacturers on this SCOTT info CD.
Check after the adjustment or assembly, whether the handlebars are firmly seat-
ed in the stem by trying to rotate the handlebars downwards (f). Verify whether
the handlebar/stem-combination can be turned relative to the fork. Do this by
taking the front wheel between your knees and trying to twist the handlebars.
If there is movement, carefully tighten the bolts a little more by using the torque
wrench, observe the maximum torque value and check again the proper fit.
Tighten carefully by approaching the prescribed maximum torque value in small
steps (0.5 Nm increments) and check in between the proper fit of the component.
DANGER!
G
The stem is one of the load-bearing parts of your SCOTT bike. Changes to
it can impair your safety. If you are in doubt or if you have any questions,
contact your SCOTT dealer!
DANGER!
G
These routines require a certain amount of manual skill and (special) tools.
Ask your SCOTT dealer to explain you both function and adjustment of your
stem or let him do that work.
DANGER!
G
The bolted connections of stem and handlebars have to be tightened to
the prescribed torque values. If you disregard the prescribed values, the
handlebars or stem may come loose or break. Use a torque wrench and never
exceed the maximum torque values! You will find the prescribed values in the
chapter “Recommended torque settings for your SCOTT bike”, directly on the
components and/or in the manuals of the component manufacturers on this
SCOTT info CD.
DANGER!
G
Stems come in varying lengths (a) as well as shaft and binder tube diam-
eters. A stem of inappropriate dimension can become a source of danger:
Handlebars, stems or forks can break, resulting in an accident. When replacing
any parts be sure to only use parts that bear the appropriate mark and, to be on
the safe side, original spare parts from SCOTT or SYNCROS. Your SCOTT dealer
will be pleased to help you.
CAUTION!
A
If you choose to use the product of another manufacturer, make sure it is
compatible with the SCOTT/SYNCROS components. SCOTT assumes no
responsibility for problems resulting from the use of non-SCOT T/SYNCROS
products. Make sure the handlebar/stem-combination is approved by the han-
dlebar and/or stem manufacturer.
CAUTION!
A
Make sure the handlebar clamping area is free of sharp edges.
b ca e fd
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Road Bikes 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Road Bikes 2018 in the language / languages: English as an attachment in your email.

The manual is 3.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Road Bikes 2018

Scott Road Bikes 2018 User Manual - German - 65 pages

Scott Road Bikes 2018 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info