779965
6
Zoom out
Zoom in
Previous page
1/7
Next page
ENGLISHENGLISH
SEATPOST ASSEMBLY:
IMPORTANT
Before assembling the seatpost into the frame, make sure the rear side of the
seatpost (side where head is longer) is at the rear end of the frame
1. push gently the seatpost into the frame
2. for electronic shifting: make sure the battery does not get stuck into the frame
3. once the desired seatpost height is achieved pre-assemble the seatpost wedge:
position the upper wedge part (505) over the mid wedge part (504) and the low
wedge threaded part (503) below the mid wedge part
4. position the M6 wedge screw (506) into the assembly head up and pre-tighten it
over 3 turns
5. position the wedge assembly into the seattube insert in front of the seattube, its
concave face should correspond to the seatpost front surface
6. tighten the M6 screw to the specified torque (T11) while making sure the upper
surface of the wedge coincides with the upper surface of the top tube.
Seatpost and seatclamp assembly are fully compatible between Plasma 4 and
Plasma 5 frames.
- Seatpost Plasma 4/5 SCOTT part number: 239318
- Seat Clamp Plasma 4/5 SCOTT part number: 239544
STORAGE BOX
Plasma 4 framesets and complete bikes are delivered with an additional storage box
that can be fitted to the top front end of the Toptube via 2 M5 Allen screws as shown
on the sketch below.
11 |
BIKE USER MANUAL | PLASMA 4PLASMA 4 | BIKE USER MANUAL
| 10
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Plasma 4 - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Plasma 4 - 2018 in the language / languages: English as an attachment in your email.

The manual is 0.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Plasma 4 - 2018

Scott Plasma 4 - 2018 User Manual - German - 7 pages

Scott Plasma 4 - 2018 User Manual - French - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info