779977

Scott MTB Ebike 2017 Manual

80
Zoom out
Zoom in
Previous page
1/87
Next page
ENGLISHENGLISH 159 |
| 158 MOUNTAIN BIKE AND MOUNTAIN BIKE-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2017ORIGINAL OPERATING INSTRUCTIONS 2017 | MOUNTAIN BIKE AND MOUNTAIN BIKE-PEDELEC
RECOMMENDED TORQUE SETTINGS FOR DISC BRAKES ON YOUR
SCOTT BIKE
Component Shimano
1
Avid
2
Tek tro
3
TRP
4
Magura HS
5
(Nm) (Nm) (Nm) (Nm) (Nm)
Brake calliper mount 6 - 8 9 - 10 6 - 8 6 - 8 6
on frame/fork (IS adapter)
8 - 10
(brake calliper)
Brake lever unit on handlebars
- Single-bolt clamp 6 - 8 Discrete Clamp Bolt/ 5 - 7 4
Hinge Clamp Bolt/
XLoc Hinge Clamp Bolt: 5 - 6
Pinch Clamp Bolt: 2.8 - 3.4
Split Clamp Bolts/
Match Maker Bolts: 3 - 4
- Two-bolt clamp 4 - 5
Union screws of cable 5 - 7 5 4
at grip and normal cable
at brake calliper
Brake cable connector at 5 - 7
brake calliper (disc tube cable)
Expansion tank cap 0.3 - 0.5
Bleeding device brake calliper 4 - 6 4 - 6
Bleeding device brake lever 2 - 4
Brake disc fixing 4 6.2 4 - 6 6 - 8
(6-holes)
Brake disc fixing 40
(centerlock)
Hose (union nut) direct connection 4
Slave cylinder (bleeder screw) 4
Brake pad retainer at brake calliper 3 - 5
Cable clamp at brake calliper 4 - 6
1 www.shimano.com 2 www.sram.com 3 www.tektro.com 4 www.trpbrakes.com
5 www.magura.com
These values are reference values of the above-mentioned component manu-
facturers. Observe the values in the manuals of the component manufacturers
on the enclosed SCOTT info CD. These values do not apply to the components
of other manufacturers.
NOTE!
I
Due to the unmanageable number of components on the market, SCOTT
is not in a position to foresee every product that will be replaced or newly
assembled by third parties. Therefore SCOTT denies any liability for such kind
of additions or modifications with regard to compatibility, torque values etc.
Whoever assembles or modifies the SCOTT bike shall ensure that the bike was
assembled according to the state-of-the-art in science and technology.
RECOMMENDED TORQUE SETTINGS FOR YOUR SCOTT BIKE
All bolted connections of the bike components have to be tightened carefully
and checked regularly to ensure the safe and reliable operation of the SCOTT
bike. This is best done with a torque wrench that disengages as soon as the
desired torque value has been reached or a click-type torque wrench. Tighten
carefully by approaching the prescribed maximum torque value in small steps
(0.5 Nm increments) and check in between the proper fit of the component.
Never exceed the maximum torque value indicated by the manufacturer!
Where no maximum torque setting is given start with 2 Nm. Observe the indi-
cated values and observe the values on the components and/or in the manuals
of the component manufacturers on the enclosed SCOTT info CD.
Component Bolted connections Shimano
1
SRAM/Avid
2
Tek tro
3
TRP
4
(Nm) (Nm) (Nm) (Nm)
Rear derailleur Mount 8 - 10 8 - 10
(on frame/derailleur hanger)
Cable clamp 5 - 7 4 - 5
Pulley wheels 3 - 4
Front Mount on frame 5 - 7 5 - 7
derailleur Cable clamp 5 - 7 5
Shifter Mount on handlebars 5 2.5 - 4
Hole covering 0.3 - 0.5
Brake lever Mount on handlebars 6 - 8 5 - 7 6 - 8
unit Time trial brake lever 5 - 7
Hub Quick-release lever 5 - 7.5
Lock nut for bearing adjustment
Of quick-release hubs 10 - 25
Sprocket cluster lock ring 29 - 49 40
Internal Hub axle nut 30 - 45
gear hub
Crank Crank mount (grease-free square-head) 35 - 50
Crank mount (Shimano Octalink) 35 - 50
Crank mount
(Shimano Hollowtech II) 12 - 15
Crank mount (Isis) 31 - 34
Crank mount (Giga X Pipe) 48 - 54
Chainwheel mount 8 - 11 12 - 14 (steel)
8 - 9 (alu)
Sealed Shell (square-head) 49 - 69
cartridge Shell (Shimano Hollowtech II, 35 - 50
bearing SRAM Giga X Pipe) 34 - 41
Shimano Octalink 50 - 70
Pedal Pedal axle 35
Shoe Cleat 5 - 6
Spike 4
Brake Cable clamp 6 - 8 6 - 8 6 - 8 6 - 8
(V-brake) Brake shoe mount 6 - 8 6 - 8 6 - 8 6 - 8
Brake pad fixing 1 - 2
Brake boss frame/fork 8 - 10
1 www.shimano.com  2 www.sram.com 3 www.tektro.com 4 www.trpbrakes.com
… 80 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott MTB Ebike 2017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott MTB Ebike 2017 in the language / languages: English as an attachment in your email.

The manual is 4.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott MTB Ebike 2017

Scott MTB Ebike 2017 User Manual - German - 89 pages

Scott MTB Ebike 2017 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info