MOUNTAIN BIKE AND MOUNTAIN BIKE-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2017ORIGINAL OPERATING INSTRUCTIONS 2017 | MOUNTAIN BIKE AND MOUNTAIN BIKE-PEDELEC
| 92
bcaefd
As an alternative, the cable can be retightened directly at the brake in the same
way. After readjusting check the functioning and make sure the brake pads do
not drag when releasing the brake lever and spinning the wheel (d). Repeated
readjustment at the brake lever makes the arm on the brake calliper change its
position. This can reduce braking power and result in a complete brake failure in
an extreme case. Risk of accident!
Some models offer further ways of adjusting the brakes directly at the brake
calliper, though this requires a certain amount of skill. Read the manual of the
brake manufacturer on this SCOTT info CD carefully before adjusting the brake.
If you are in doubt or if you have any questions, contact your SCOTT dealer.
DANGER!
G
Repeated readjustment at the brake cable can drastically reduce the maxi-
mum braking performance.
NOTE!
I
Read in any case the manual of the brake manufacturer on this SCOTT info
CD carefully before removing the wheel or doing any maintenance work.
Improper operation can lead to brake failure.
GEARS
DERAILLEUR GEARS
The gears (e+f) of your SCOTT bike serve to adjust the gear ratio to the terrain
you are riding on and the desired speed.
A low gear (where in the case of derailleur gears the chain runs on the small
chainring and a large sprocket) allows you to climb steep hills with moderate
pedalling force. You must, however, pedal at a faster pace or higher frequency.
High gears (large chainring, small sprocket) are for riding downhill. Every turn of
the pedals takes you many metres forward at correspondingly high speed.
NOTE!
i
Transport of your SCOTT bike with the wheels mounted: Pull the brake lever
and secure it with a strong elastic strap, when transporting your SCOTT
bike with hydraulic disc brakes. This will prevent air from entering the system.
NOTE!
i
When transporting your SCOTT bike with the wheels removed, make sure
to mount the transport locks. Pull the brake lever and secure it with a strong
elastic strap, when transporting your SCOTT bike with hydraulic disc brakes (a).
This will prevent air from entering the system.
NOTE!
I
Read in any case the manual of the brake manufacturer on this SCOTT info
CD carefully before removing the wheel or doing any maintenance work.
Improper operation can lead to brake failure.
Mechanical disc brakes
Functional check
The more brake pads of mechanical disc brakes wear down, the longer is the
brake lever travel. Regularly check whether you get a positive braking response
before the lever touches the handlebars. Make sure the brake cables are in
sound condition!
DANGER!
G
Damaged cables (b) should be replaced immediately, as they can snap. Risk
of accident!
Wear and maintenance
To a certain extent, wear of the brake pads can be compensated directly at the
brake lever. Unscrew the knurled lock nut on the bolt through which the cable
enters the grip (c) and then unscrew the bolt until the lever has the desired trav-
el. Retighten the lock nut by taking care that the slot of the bolt does not face
upward or forward, as this would permit an unnecessarily high amount of water
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Scott MTB Ebike 2017 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Scott MTB Ebike 2017 in the language / languages: English as an attachment in your email.
The manual is 4.7 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
