779975
11
Zoom out
Zoom in
Previous page
1/33
Next page
ENGLISHENGLISH 21 |
KIDS’ TOY BICYCLE | OWNER’S MANUAL 2017OWNER’S MANUAL 2017 | KIDS’ TOY BICYCLE
| 20
b ca e fd
Adjustment of the saddle to the correct position
Your child needs to have the saddle horizontal in order to pedal in a relaxed
manner. If it is tilted, he/she will constantly have to lean against the handlebars
in order not to slip off the saddle.
To adjust the saddle position release the nut of the saddle clamp at the top of
the seat post at the top at the seat post one to two turns with an open-end
spanner.
Do not undo the nut fully, otherwise the whole assembly can come apart. Push
the saddle into the desired position and tighten the nut up again. Make sure
the saddle is in horizontal position (a) and the indexing in the saddle clamp has
“clicked into place” as your retighten the nut. Try to tilt the saddle up a little, and
then you can tell whether or not the mechanism has clicked into place. If it has,
tighten the nut.
Finish by checking the reliable fit by trying to tilt the saddle a little (b).
DANGER!
G
Improperly closed quick-releases and other fastenings can cause compo-
nents of the SCOTT toy bicycle to come loose and result in serious acci-
dents!
DANGER!
G
Never let your child ride the toy bicycle with the seat post drawn out be-
yond the limit, maximum, or stop mark! The seat post might break or cause
severe damage to the frame. In the case of frames with seat tubes that extend
beyond the top of the frame’s top tube the seat post should be inserted into the
seat tube at least below the bottom of the top tube and below the top of the
rear stays! If seat post and frame require different minimum insertion depths,
you should opt for the deeper insertion depth.
CAUTION!
A
Children and adolescents need to have the saddle height checked at least
every 3 months (c)!
CAUTION!
A
If the seat post does not move easily inside the seat tube or if it cannot be
tightened sufficiently, ask your SCOTT dealer for advice. Do not use brute
force!
NOTE!
I
If sitting on the saddle causes your child trouble, e.g. because it numbs his/
her crotch, this may be due to the saddle. Your SCOTT dealer has various
saddles available and can offer advice on position.
ADJUSTMENT OF THE HANDLEBARS
Adjustment of the tilt of the handlebars
The handlebars of SCOTT toy bicycles are usually slightly bent at the ends. Set
the handlebars (d) to a position in which the wrists of your child are relaxed and
not turned too much outwards.
The height and inclination of the handlebars can be adjusted by releasing the
bolt at the top of the stem (e). Bring the handlebars into the desired position.
Carefully retighten the bolt(s). Try rotating the handlebars once clamped in the
stem and tighten the bolt a little more, if necessary. Make sure the handlebars
are accurately centred in the stem.
CAUTION!
A
Children and adolescents need to have the height of the handlebars
checked at least every 3 months!
Adjustment of the height of the handlebars
Release the expander bolt by two to three complete turns (e). The stem should
now turn freely inside the fork. If it does not, release the bolt by tapping it gently
with a rubber hammer. With Allen bolts, you need to stick the Allen key into
its head first, as it is normally countersunk and therefore impossible to be hit
directly.
CAUTION!
A
Never try to unscrew the top race of the headset when you only want to
adjust the stem, as you will otherwise alter the bearing play (f)!
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott MTB 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott MTB 2018 in the language / languages: English as an attachment in your email.

The manual is 1.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott MTB 2018

Scott MTB 2018 User Manual - German - 89 pages

Scott MTB 2018 User Manual - French - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info