779963
8
Zoom out
Zoom in
Previous page
1/16
Next page
ENGLISHENGLISH
SET-UP GENIUS LT WITH FOX NUDE OR FOX CTD SHOCK
The Set-Up of the FOX Nude or FOX CTD Shock can be easy done within a few minutes.
IMPORTANT!
For all adjustments of the air spring the remote lever has to be in position “alltravel
To adjust the air pressure of the air chamber of the FOX Nude or FOX CTD Shock please
refer to the following instruction:
1. Remove the valve cap of the valve (S5) located on the shock housing (S3).
2. Mount the shock pump with its adaptor on the valve
3. Please take into account that it takes some air pressure from inside the shock to drive the
indicator on the pump. Make sure to balance at least this air loss when you make a check
of the air pressure of the shock. Pls also note that the indicators of shock pumps have a
tolerance of max. 10%
4. Please use the FOX iRD App available at the iTunes App store with following link:
https://itunes.apple.com/us/app/fox-intelligent-ride-dynamics/id549035102?mt=8&ign-
mpt=uo%3D4)
5. After downloading the app on your mobile gear please follow the steps shown in the app
and inflate the shock according to the air pressure indicated.
6. When you reached the needed pressure remove the pump and put the valve cap on
the valve.
SAG
The SAG should be 18mm on the shock piston.
To check the adjustment, please follow as shown below:
1. sit on the bike, put your feet on the pedal
2. put your feet back on the ground and stand over the bike without bouncing the bike
during this action
3. check if the o-ring (S9) on the shock piston (S8) has a distance of 18mm to the main dust
wiper/seal between shock housing and piston.
-if the distance between the o-ring and the main dust wiper/seal is 18mm, the air pressure
is matching to your weight
-if the distance between the o-ring and the main dust wiper/seal is less than 18mm, the
air pressure of the air chamber is too high and should be carefully reduced by using the
bleed knob of the shock pump until the distance is 18mm.
-if the distance between the main dust wiper/seal is bigger than 18mm the air pressure
of the air chamber is too low and should be increased by using the shock pump until the
distance is 18mm.
15 |
BIKE USER MANUAL | GENIUS LTGENIUS LT | BIKE USER MANUAL
| 14
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Genius LT Plus 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Genius LT Plus 2018 in the language / languages: English as an attachment in your email.

The manual is 1.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Genius LT Plus 2018

Scott Genius LT Plus 2018 User Manual - German - 16 pages

Scott Genius LT Plus 2018 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info